Top Printing Speed For Ender 3

YOUSU Carbon Fiber PLA Filament 1.75 mm for 3D Printer & 3D Pen 1 kg (2.2 lbs) Black

  • [Premium PLA Filament] Carbon fiber filament Compared with PLA, stronger toughness, higher strength and rigidity, brittle feel, low shrinkage, high fluidity, suitable for printing industrial products.
  • [Problem Free & Easy to Print ] Yousu Carbon fiber PLA filament has better dimensional stability for warp free printing, excellent layer adhesion,clog-free, bubble-free and easy-to-use, and easy support removal..
  • [ Cost-effective and Wide Compatibility ]Our Yousu Filament is Compatiable for Most FDM 3D Printers in the market,Such as Creality Ender,Ender 3,Anycubic,Flashforge, Makerbot,Aquila,Etc..
  • [Vacuumed Sealed Package] The Filament Net Weight: 1KG. Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed. NOTE:Please pass the filament through the fixed hole to avoid tangles after use..
  • [Recommended printing conditions]: 195°C-220°C (depending on the printer model), Printing speed: 50-100mm/s. Hot bed temperature: 50 – 60°C.
Check Stock

LANMU Micro SD to SD Card Male to Female Extension Cable Adapter, Flexible Extender Compatible with Ender 3 Pro/Ender 3/Ender 3 V2/Ender 5/Monoprice Mini/Anet A8 3D Printer/Raspberry Pi (5.9in/15cm)

  • Premium Materials: Micro SD to SD Card Extension Cable is made of High-quality Plastic & FFC.5.9in length design make it flexible and long enough to extend and read your SD cards..
  • Type: Micro SD to SD Card male to female Extension Adapter..
  • Support the card 32G, easily make your navigation upgraded, much more convenient for your life..
  • Universal Compatibility: Widely compatible with GPS, DVD, DVR, LED/LCD screen, mobile phones, Raspberry Pi and reality 3D printers, such as CR-10,Ender 3 Pro,Ender 3,Ender 3 V2,Ender 5,Anet A8,Anet A6, MonoPrice and more.(Note:If the micro sd end is locked, it will make a "click" sound to remind you. Please check it before printing.If you wanna change the card, please firstly unplug the micro sd card, change the new card,then plug the micro sd card to the printer slot again.).
  • Fast Reading Speed: LANMU SD Card Extension never affect the read and write speed of your machine, keeping it efficient and safe..
Check Stock

Official Creality Ender 3 V2 Upgraded 3D Printer with Silent Motherboard Meanwell Power Supply Glass Bed 220x220x250mm

  • Silent Motherboard: Creality ender 3 v2 with TMC2208 stepper driver and 32-bit V4.2.2 silent motherboard.
  • More stable movement performance can ensure....
  • Carborundum Glass Platform: Enable the hot bed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer..
  • MeanWell Power Supply: Ender 3 V2 is equipped with a MeanWell power supply, which can meet the needs of fast heating and long-term printing..
  • Resume Printing Function: Ender 3 v2 has resume printing function that can from the last recorded extruder position after suffering unexpected power....
  • Ideal for Beginners: Creality ender 3 v2 provides simpler operation.
  • the upgrade of this printer reduces the burden on beginners, everyone can enjoy....
Check Stock

Creality Ender PLA 3D Printer Filament (Yellow)- Polymer Smooth Printing 1.75mm 1kg Spool (2.2lbs)Dimensional Accuracy± 0.03 mm

  • ...ilable from renowned suppliers. Dedicated people, highest standards. Production on our state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected, every time..
  • HIGH SUCCESS RATE: Neat Winding Technology of our Filaments makes 3D printing smooth and stable, avoiding tangles and jamming, ensuring the quality for long-time printing.
  • Professional production reduces bubbles and create no odor during the printin.
  • Good adhesion improves the success rate of 3D printing..
  • EXCELLENT RESULTS: The glossy feel of Ender PLA Filament often attracts those who print display models or items for household use. Many appreciate the plant- based origin of this material. When properly cooled, our filament has a high maximum printing speed and sharp printed corners. Combining this with low warping of the print makes Ender PLA popular for home printers, hobbyists, prototyping and schools..
  • PROTECT YOUR PRINTER: Ender PLA Filament is not easy to break, with precise consistent diameter and no clogging. With its premium quality it provides cares for your printer when working..
  • VACUUM PACKAGE: Sealed vacuum packing with desiccant keeps the filament dry and sound before getting to you. Keep the f....
Check Stock

Official Creality Ender 3 S1 3D Printer with Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Printing Size 8.6X8.6X10.6in, Upgrade Ender 3 V2 for Beginners

  • ... lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU..
  • CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed..
  • Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet..
  • Higher Printing Precision & Easy to Install: With a Z-axis dual-screw+Z....
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • 300°C HIGH-TEMP PRINTING: Creality new 3D printer Ender-3 S1 Pro Print excellently with diverse filaments, such as PLA, ABS, WOOD, TPU, PETG, PA, etc..
  • “SPRITE” FULL-METAL DUAL-GEAR DIRECT EXTRUDER: the new upgraded direct extruder of the Creality 3D Printer Ender-3 S1 Pro comes with the pushing force up to 80N, the extruder realises smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300°C High-Temperature Nozzles,Sprite Metal Direct Extruder,Removable PEI Spring Platform,CR Touch Auto Leveling,LED Light,Print Size 8.6×8.6×10.6in

  • 【300°C High-Temperature Nozzles】: The Ender 3 S1 Pro 3d printer's nozzle made of brass can stand up to 300℃ printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【"Sprite" Full-Metal Dual-Gear Direct Extruder】: Ender 3 S1 Pro uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【CR Touch Auto Leveling & 4.3-inch Color Touch Screen】: Equipped with CR Touch, the 16-points automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. The 4.3-inch color touch screen enables click-to-control. It supports the switch among nine languages, making the printer more manageable for people from various regions worldwide. Therefore, Ender 3 S1 Pro is....
Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

  • 【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ...h a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands..
  • ✔️【Wide Application】✔️ The size of ender 3 PEI is 235*235mm（9.25*9.25inch). Please confirm the size of your 3d printer. After installing the print bed, please re-level it to improve the printing effect. , it is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1,Ender 3 S1 pro,Ender 3 neo,Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similar....
Check Stock

25PCS 3D Printer Nozzles, Premium MK8 Nozzle Ender 3 Nozzles 0.4 mm, 3D Printer Brass Nozzles for Makerbot Creality CR-10 Ender3 V2 Ender3 Pro with 5 Needles by Zojicif

  • ...atible-with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
  • 【Good performance】Our precision 3d printer brass nozzles MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc..
  • 【What you get】25pcs 0.4mm 3d printer nozzles, 5pcs free needles for cleaning extruder nozzles, sufficient quantity to facilitate your timely replacement, achieving quality printing. Any questions about the product, contact us and we would be very happy to solve your problems..
Check Stock