Top Profile Air Cylinder

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock

Pneumatic Air Cylinder, Double-Acting Cylinder 10mm Diameter 100mm Stroke Pressure 1Mpa Made of Stainless Steel

  • 【SPECIFICATION】 Fluid: Air, Type: Double-acting, Cylinder Diameter: 10mm, Stroke: 100mm, Pipe Size: M5 * 0.8, Pressure: 1Mpa.
  • 【MATERIAL】 The cylinder made of high quality stainless steel, the pneumatic cylinder has long service life.
  • 【FEATURE】 This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • 【PRACTICAL】 Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage.
  • 【SERVICE】 If you have any questions or need any suggestions about the products we have sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

49CC 2 Stroke Engine Motor Racing Complete Engine Motor Pull Start Motorized Bike Engine Kit for Mini Pocket Bike Scooter Dirt Bikes ATV Quad Motorized Bicycle (Minimoto Engine(B))

  • 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder, Displacement: 49CC, Stroke: 2-stroke, Bore: 44mm/1.7'', Chain: 25h, Gas-oil Mix Rate: 25:1, Gear Box Reduction Rate: 3.1:1, Cooling: Air Forced Cooling, Spark Plug Size: L7T L7TC..
  • 【MAIN PARAMETERS 2】Start Way: Recoil pull start, new style recoil, easy to pull start.
  • Recoil Starter Material: New style easy pull starter.
  • Application: for most air cooled mini dirt bikes.
  • Package size: 34cm x 25cm x 15cm (13'' x 10'' x 6'').
  • 【COMPLETE ENGINE MOTOR】This Engine is complete with high performance cylinder head, plug, powder coated metal pull start, air filter and 14mm/0.55'' carburettor, balanced crank, balanced flywheel, ported piston windows, up-rated CVT transmission unit..
  • 【HIGH EFFICIENCY ENGINE】49CC mini motor air cooled racing engine capable of achieving 40mph dependant on user weight and terrain. 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder,.
  • 【CUSTOMER HAPPINESS IS OUR PRIORITY】: We stand by and believe in our products 100%! If you have any problems, contact us and we will find a solution together!.
Check Stock

HMANE γ-Shape Stirling Engine Kit for Adults, DIY Unassembled Retro Generator Model Science Educational Toys with LED Lights, Bronze

  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Easy to assemble and has collection value. It can be used as a decoration or as a school experiment item. Package list: 1 stirling engine.
  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Eas....
Check Stock

Cylinder Leak Down Tester Kit,Automotive Engine Pressure Gauges Compression Test Leakage Detector Tool Set TU-21

  • Features: it is used to detect many common faults of the engine, such as piston ring wear, cylinder head crack, valve wear and cylinder head seal....
  • General accessories: It is very suitable for testing trucks and models with minimum clearance. Check the leakage of the four stroke engine..
  • How the leak tester works: once the leak tester is connected to one of the cylinders, compressed air (45-100 psi) enters the cylinder through an....
  • Easy to operate: remove the Schrader Valve and close the regulator before using workshop air. Install the hose on the cylinder, install the device on....
  • Package: 48cm recoil hose, 12mm and 14mm spark plug adapters, fixed connector M14 x 26mm, fixed connector M16 x 26mm, pressure+cylinder leakage gauge,....
Check Stock

Can Crusher,Pneumatic Cylinder Can Crusher, Heavy Duty Air Cylinder Soda Beer Aluminum Can Crusher, Eco-Friendly Recycling Tool (Autofeed Button Valve)

  • ✅【HIGH QUALITY MATERIAL】Our cylinder tank crusher body is made of high quality iron, which is very strong and durable. The cylinder is made of high-quality aluminum alloy with good cooling performance, and the air tank compressor allows the used cans to enter the recycling bin for reuse..
  • ✅【AIR PUMP DRIVE】The surface of the cylinder type can breaker is sprayed with plastic, and the cylinder type can press is driven by an air pump, just press and turn the button to easily press the can. Compared with traditional spray paint, it has better wear resistance and corrosion resistance. The plastic-coated surface extends the life of this barrel can crusher..
  • ✅【HIGH WORKING EFFICIENCY】The aluminum cylinder with sufficient strength and rigidity provides high working efficiency for the can crusher. It is capable of crushing 20-30 cans per minute. The volume of the broken tank is less than 20%, which greatly reduces the volume of the tank and saves a lot of space..
  • ✅【WIDE RANGE OF APPLICATION】This cylinder type can crusher is equipped with all accessories. You just follow the instructions for a simple assembly and ready to use, the cylinder-type can breaker can handle cans with a capacity of less than 16.90 ounces. The operation is simple, l....
Check Stock

Athena (S410485308002) Replacement Cylinder Head Dome

  • For Athena Two Piece Cylinder Head #S410485308001 Only.
  • Machined Stock Profile Cylinder Head Dome.
  • Replace a damaged dome without having to replace an entire head.
Check Stock

CISA European Profile Mortise Double Cylinder Lock 60 mm or 2-3/8 Double Cylinder

  • Shifted Cylinder cam design prevents extraction by impacts.
  • Spools provide protection against lockpics.
  • Standard European profile double cylinder.
  • To be installed in european mortise locks.
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

CHEINAUTO Cylinder Leak Down Tester Engine Compression Diagnosis Tester Kit Dual Pressure Gauges Engine Compression Leakdown Detector Leakage Test Set for Gasoline Engine

  • 【UNIVERSAL FITMENT】Suits all local and imported cars and trucks, ideal for testing trucks and car models where clearance is minimal. check the....
  • 【FEATURE】Designed to detect a variety of common engine faults such as worn piston rings, cylinder head cracks, worn valves and blown head gaskets.....
  • 【WORKING PRINCIPLE OF LEAKDOWN DETECTOR】 Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed....
  • 【PROFESSIONAL LEAKAGE DETECT FUNCTION】: This cylinder leak tester checks the amount of leakage in an engine cylinder and helps determine the....
  • 【EASY TO USE】Remove the Schrader valve and turn the regulator off before applying shop air. Install the hose to the cylinder, the unit to an air....
Check Stock

G1/4 Threaded Pneumatic 4 Way 7 Port Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting (Pack of 2)

  • Operating Temperature: 0 - 60 Degree Celsius.
  • Air cylinder manifold is the starting points for air cylinder systems. Can be mounted in line or at a take-off point easily with the G1/4 diameter threaded hole design..
  • It takes one row of air from a pump, air cylinder, compressor, vacuum engine or other such system and splits it into many..
Check Stock

Mini Hot Air Stirling Engine Motor Stirling Engine Science Experiment Kit Miniature Steam Power Physics Toy Lab Teaching Model Children Physics Science Education Toys

  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service life. The quartz glass cylinder is high temperature resistance and fracture resistance. Easy to assemble and has collection value. It can be used as a decoration or as a school experiment item. Package list: 1 stirling engine.
  • EXTREMLY WELL-MADE: This hot air stirling engine motot is made of high‑quality zinc alloy body, aluminum alloy bottom plate, hard, corrosion‑resistant, and long service lif....
Check Stock