Top Profile Cutting

Imachinist S62121014 62\ Long, 1/2\ Wide, 0.025\ Thick, Variable Teeth Bi-Metal Band Saw Blades for Soft Ferrous Metal (10/14TPI)

  • Bi-metal type, HSS M42 grade, 62" long, 1/2" wide, 0.025" thick, 10/14TPI.
  • 10/14TPI are suitable for cutting tube and profile.
  • Suits all bandsaws which use 62" long, 1/2" wide band saw blade.
Check Stock

Carpenters' End Cut Pliers-Hammer Head Style

  • Premium Material:This end cutting nipper is made of forged alloy tool steel Cr-Ni for long lasting performance, laquer treatment on surface to prevent rust.
  • Sharp Jaw Cutting:Blades are induction hardened to HRC 58-64 for superior cutting performance and durability.
  • Non-slip Handle:This 7 inch end niper plier with no-slip red cushion rounded handle offers comfortable grip.
  • Multi-Functions:High-leverage design and round head profile for easily cutting off nails and screws, trim wires, and pulling out nails and staples, light but smooth construction, easy to open and close in your hand.
  • Wide Application:The end cutting plier is good at construction, floor installation, carpentersfor cutting copper, aluminum, steel, and piano wire in solid, stranded, or braided forms.
Check Stock

Imachinist S6412121014 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 10/14TPI Variable Teeth M42 for Metal

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 10/14TPI.
  • 10/14TPI for cutting solid bar and hollow tube, profile.
  • 10/14tpi is variable teeth profile, big teeth distance is 2.5mm per teeth, small teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

DNYSYSJ Chainsaw Rail Mill Guide System Wood Lumber Cutting Sawmill 9FT or 5FT Ladder Wood Fixing Plate Rail Mill Guide

  • 【PARAMETER DETAILS】Aluminum profile: 28x28x910 mm (1.1x1.1x36 inch).
  • 【RAIL MILL GUIDE SYSTEM】This list is a 2.7-meter track suitable for open-plate brackets, which is durable and reliable.
  • 【QUALITY】Six pieces square aluminum profile.
  • Used with chain saw for wood chip cutting.
  • Creates a straight and level first cut along a log..
  • 【APPLICATION】This rail mill guide system is used with chain saw and chainsaws frame for log wood chip cutting..
  • 【Service】All our products are shipped from US warehouses and you can receive quickly. Hanseryshop has a professional customer service team, ready to solve any of your problems at any time.
Check Stock

Imachinist S64121224 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 24tpi for Cutting Soft Ferrous Metal

  • Bi-metal type, M42 grade, 80" long, 1/2" wide, 0.025" thick, 14TPI teeth profile for stainless steel.
  • Suitable for cutting stainless steel and other steel (hardness less than 30HRC), don't recommend to cut non-ferrous metal.
  • Fixed teeth profile 14TPI is suitable for cutting thin pipe tube profiles etc.
  • Please do NOT cut any non ferrous metals with this blade.
  • Suits all bandsaws which use 80" long, 1/2" wide band saw blade.
Check Stock

10 Piece 9” 14-TPI Thick Metal Cutting Reciprocating Saw Blades

  • ★10-PACK, 9-Inch Metal Cutting Reciprocating Saw Blades, 14 Teeth Per Inch..
  • ★Bi-Metal (stronger than HCS) material guarantees long lifetime on metal cutting. Maxmized the cutting range from soft to hard..
  • ★Suitable blade height and flexible thin blade body is more resistant to breaking and shattering.
  • ★Fast straight cut, effortless cutting into thick sheet metal, metal pipe and solid pipes/profile..
  • ★【UNIVERSAL COMPATIBILITY】Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi.
Check Stock

Epicurean Kitchen Series Cutting Board, 8-Inch × 6-Inch, Natural

  • 8-Inch x 6-inch cutting board in natural.
  • made in the USA from Richlite paper composite material.
  • makes the cutting board durable, knife friendly, non-porous.
  • it’s thin profile is lightweight and can be used on both sides.
  • built in thumb hole allows for easy storing.
  • Perfect for chopping, slicing, cutting and serving.
  • can be used both in and out of the kitchen.
  • Cutting board doesn't require maintenance.
  • can hold upto temperature of 350°F, so it can be used as a trivet.
Check Stock

Epicurean Kitchen Series Cutting Board 17.5-Inch × 13-Inch Natural

  • 17.5-Inch x 13-inch cutting board in natural.
  • made in the USA from Richlite paper composite material.
  • makes the cutting board durable, knife friendly,....
  • it’s thin profile is lightweight and can be used on both sides.
  • built in thumb hole allows for easy storing.
  • Perfect for chopping, slicing, cutting and serving.
  • can be used both in and out of the kitchen.
  • Cutting board doesn't require maintenance.
  • can hold upto temperature of 350°F, so it can be used as a trivet.
Check Stock

Epicurean Kitchen Series Cutting Board 8-Inch × 6-Inch Nutmeg

  • makes the cutting board durable, knife friendly, non-porous.
  • it’s thin profile is lightweight and can be used on both sides.
  • built in thumb hole allows for easy grip when storing.
  • Perfect for chopping, slicing, cutting and serving.
  • can be used both in and out of the kitchen.
  • Cutting board doesn't require maintenance.
  • can hold upto temperature of 350°F, so it can be used as a trivet.
Check Stock

Epicurean Kitchen Series Cutting Board, 11.5-Inch × 9-Inch, Natural

  • 11.5-Inch x 9-inch cutting board in natural.
  • made in the USA from Richlite paper composite material.
  • makes the cutting board durable, knife friendly, non-porous.
  • it’s thin profile is lightweight and can be used on both sides.
  • built in thumb hole allows for easy storing.
  • Perfect for chopping, slicing, cutting and serving.
  • can be used both in and out of the kitchen.
  • Cutting board doesn't require maintenance.
  • can hold upto temperature of 350°F, so it can be used as a trivet.
Check Stock

Imachinist S64121214SS 64-1/2\ Long, 1/2\ Wide, 0.025\ Thick Bi-Metal Bandsaw Blades for Cutting Stainless Steel (14TPI)

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14TPI teeth profile for hard metal like stainless steel.
  • Suitable for cutting stainless steel and other steel (hardness less than30HRC), don't recommend to cut non-ferrous metal.
  • Fixed teeth profile 14TPI is suitable for cutting thin pipe tube profiles etc.
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide band saw blade.
Check Stock

MRCGTCE Metal Cutting Reciprocating Saw Blades, 9” 18-TPI10-Piece

  • ★10-PACK, 9-Inch Metal Cutting Reciprocating Saw Blades, 18 Teeth Per Inch..
  • ★Bi-Metal (stronger than HCS) material guarantees long lifetime on metal cutting. Maxmized the cutting range from soft to hard..
  • ★Suitable blade height and flexible thin blade body is more resistant to breaking and shattering.
  • ★Fast straight cut, effortless cutting into thin sheet metal(1.5 to 4mm), metal pipe and pipes/profile (dia. 5-175mm) ..
  • ★【UNIVERSAL COMPATIBILITY】Works with all major reciprocating saw brands such as DeWalt, Makita, Ridgid, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, Bosch, Hitachi.
Check Stock