Top Prototyping Boards Accessories

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

Hosyond 3Pcs ESP8266 NodeMCU CP2102 ESP-12E Wireless WiFi Module Internet of Things Development Board Compatible with Arduino IDE/Micropython

  • Not only it is easy to program for this controller by using the CP2102-USB interface,but also unnecessary to press the flash and reset buttons before each flash operation..
  • NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • The ESP8266 has powerful on-board processing and storage capabilities, and can be integrated with sensors and other application-specific devices through its GPIOs..
  • It is compatible with Arduino IDE,works great with the latest Mongoose IoT/Micropython..
  • Modern Internet development tools can use the built-in API to instantly put your idea on the fast track..
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

Silver Aluminum Extrusion 48' (1220 mm) Clear Anodized Misumi Series 5 (20mm x 40mm) - 4 pack

  • 4 Pack - Each measures 48 Inches (1220mm) x 20mm x 40mm.
  • Compatible with all 5 Series Fasteners and Accessories.
  • Ideal for Robots, Housings, Linear Motion, Enclosures etc..
  • Infinitely Adjustable for Fast Prototyping.
  • Corrosion Resistant A6N01SS-T5 Aluminum Alloy - Clear Anodized Silver Color.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

20 PCS Alligator Clips Electrical, 5-Color 21.5inch Test Leads with Alligator Clips, Stamping Jumper Wires for Electrical Testing, Circuit Connection, Experiment

  • PACKAGE INCLUDES: 20 Pcs test leads with alligator clips. Five colors, four of each color. 5 color test leads are convenient to keep track of the situation, help you distinguish one from another visual..
  • SAFETY & DURABILITY: The jumper wire is made of PVC material, safe and reliable, strong elastic force. Test lead surface plating, glossy. Does not cause wire crossing or a short circuit..
  • NON-SLIP & FORCEFUL: Alligator clips electrical are made of nickel-plated steel with a strong spring and a strong connection to ensure good conduction..
  • WIDELY USED: Widely used in laboratory, electrical testing, such as experiments, circuit boards, prototyping, troubleshooting, etc. It can be used in laboratories, shops, schools, homes and industries..
  • WHAT YOU GET: 20 PCS alligator clips electrical, our 7*24 friendly customer service for peace of mind..
Check Stock

EPLZON Gold Plated PCB Solder-able Breadboard for DIY Electronics Projects Compatible with DIY Arduino Soldering Projects 2.05"x3.5" (5 Pack + 2 Mini Board, Black)

  • ✅This board is especially useful for preserving a prototype or experiment you just created on a solder-less breadboard by soldering all the pieces in place..
  • ✅Suitable for a variety of MCU boards, compatible with Arduino Nano, ESP8266, NodeMCU, etc.
  • suitable for various DIP type components.
  • suitable for any type of Raspberry Pi GPIO breadboard PCB..
  • ✅Gold plated finish to prevent oxidation, high quality gold finish for easy soldering,and all holes are through-plated for mounting strength.
  • ✅5pcs 2.05"x3.5" PCB Solder-able Breadboard + 2pcs 2.0"x1.5" mini PCB Solder-able Breadboard for prototyping and transferring,Black.
  • ✅Lead-free and RoHS compliant for longer shelf life.
Check Stock

Chanzon 6 pcs Mini Breadboard with 170 Tie Points SYB-170 Solderless Prototype Kit 6 Different Color PCB Bread Board Plus Adhesive Back for Small DIY Kits Arduino Raspberry rasp Pi Proto Project

  • Solderless SS breadboards, 6 in One Pack, with Tight Metal Spring under Tie Point for Good Connections, Springs Aligning Perfectly with Points Makes....
  • Mutiple board can be connected together for expansions, Self-adhesive tape on the back of the bread board(single sided Prototyping Circuit boards)..
  • Type: SYB170 | Hole-diameter: 1 mm / 0.04 inches | Hole-pitch: 2.54 mm / 0.1 inches | Thickness: 10mm | Kits : 6pcs 6 different colors (black white....
  • WARRANTY AND CUSTOMER SERVICE - We provide 1 year warranty for this pcs board, Our Electronic Customer service team is ready for income request 24x7.....
Check Stock

SparkFun RedBoard Qwiic ATMega328P compatible with Arduino board w/ Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
  • Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
  • Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
  • Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
  • The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..
Check Stock

SYMPL Premium Surfboard Traction Pad, 3 Piece Deck Pad Full Size Coverage for Surfing, Skimboarding, with Maximum Grip Using 3M Adhesive, Degreed Arch Support, Fits Fish, Square, Swallow, Round Tail

  • ...board and long boards. Sympl Grip is better then surf wax and doesn't make a mess like surfboard wax does. Great for long boards, wakesurf board and skim board traction..
  • ULTIMATE DECK GRIP: Our custom made diamond grooves and corduroy grooves come on ultra-light EVA foam with 3m Adhesive. We provide Premium surfing accessories for surfers and all board riders..
  • STYLE: Minimalist modern Color options for everyone. We make front traction pad surf grip and 2pc. fish grips. Great for long boards, wakesurf board and skim board traction. Sympl traction is for all boards..
  • PROFESSIONAL: Shred options for everyone. Sympl makes premium quality surf and water sport accessories. Great for long boards, wake surf board and skim board traction. Sympl traction is for all boards. We make front traction pad surf grip and 3pc. fish grips. Slash traction pads work great on all boards. If you are not completely satisfied for ANY reason, simply return it within 30 days for a full refund, no questions asked!.
Check Stock

3Pcs ESP8266 ESP-12E,Aideepen NodeMCU ESP8266 30PIN ESP-12E Development Board Wi Fi WLAN WL Module CP2102 for NodeMCU for ESP-12E for Arduin0

  • 【ESP8266】This is ESP8266 V2 Nodemcu Lua development board,works great with the latest Compatible with Arduin IDE/Mongoose IoT/Micropython..
  • 【30PIN】ESP8266 CP2102 chip.it's easy to program,without having to press the flash and reset buttons before each flash operation..
  • 【NodeMcu】NodeMcu is an open source Lua based firmware for the ESP8266, ultra low cost wireless modules, development boards for rapid prototyping, integrated with ESP8266 chips..
  • 【Easy】The ESP8266 has powerful on-board processing and storage capabilities.and has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board very easy to use..
  • 【Why choose us】You can use it with our development board ASIN B0B85C98FX,to make your project more convenient and efficient.Aideepen specializes in various electronic components,please feel free to contact us..
Check Stock