Top Ptfe Flange

Sterling Seal and Supply (STCC) 24BB.100.062.50 White PTFE Teadit 24BBA Expanded Gasket Tape, 1\ Width, 1/16\ Thick, 50' Spool

  • SSS 24BBA is made from 100% pure, expanded, virgin PTFE. The whole production process is subject to strict quality control, registered under DIN EN ISO 9001.
  • SSS 24BBA has excellent malleability which compensates for small damage and uneven areas on the flange faces.
  • SSS 24BBA has exceptional thermal and chemical stability, which makes this material very versatile.
  • Expanded PTFE Tape can be used to seal all aggressive chemicals over the entire 0 to 14 pH range, except for molten alkali metals and elemental fluorine.
  • Maximum Service of 500 Degrees F (260 Degrees C) & minimum of -450 Degrees F (-268 Degrees C).
Check Stock

United Scientific Supply Desiccator, Vacuum, Clear Base, 12\ - USS

  • The PP stopcock has a self-lubricating PTFE plug.
  • The transparent pc bottom provides increased viewing clarity.
  • An internal groove on the flange holds the silicon rubber O-ring.
  • Package Dimensions: 28.7 L x 35.1H x35.1W x(centimeters).
Check Stock

Chemglass Rotary Evaporator Flask Only, 5L

  • With reflux valve for distillation under total reflux.
  • Unique design vapor seal maintains vacuum.
  • 5L Evaporating Flask Capacity with flat flange.
  • With feeding valve and bottom drain valve for continuous operation without interruption of vacuum.
Check Stock

Desiccator Vacuum, 20cm - Silicone O-Ring - Polypropylene and Polycarbonate - PTFE Plug and Stopcock - Flat Dome - Autoclavable - 740mm Hg for 24 Hours - Eisco Labs

  • Holds a full vacuum (740mm Hg 20cm) at room temperature for 24 hours - Will remain airtight even if not under vacuum.
  • Clear polycarbonate top on a chemical-resistant white polypropylene bottom.
  • Internal groove on the flange holds a silicone rubber O-ring (I.D.: 200 mm, Flange O.D.: 232 mm).
  • Fitted with a polypropylene stopcock with a self-lubricating PTFE plug which allows a controlled entrance of air preventing unnecessary turbulence.
  • ‘Flat Dome,’ clear polycarbonate top with large ribbed knob which maximizes interior clearances.
Check Stock

PTFE Oil Seal Set for USA Lab 20L RE-1020 Rotary Evaporator - USAlab

  • With reflux valve for distillation under total reflux.
  • Unique design vapor seal maintains vacuum.
  • 5L Evaporating Flask Capacity with flat flange.
  • With feeding valve and bottom drain valve for continuous operation without interruption of vacuum.
Check Stock

CHEM SCIENCE INC CS-A0272419 Rotary, Evaporator, Bump Trap Anti Climb, Top Joint 24/40, Bottom Joint 19/22, Capacity 100 mL

  • With reflux valve for distillation under total reflux.
  • Unique design vapor seal maintains vacuum.
  • 5L Evaporating Flask Capacity with flat flange.
  • With feeding valve and bottom drain valve for continuous operation without interruption of vacuum.
Check Stock

MaxSen 8 Inch Center Deck Mount Double Handle Spray Value Commercial Pre Rinse Restaurant Kitchen Faucet With Pot Filling Add On Spout (8 Inch Centersize)

  • 【8" Center Commercial Faucet】Low Profile Pre Rinse unit with Eccentric Flange, fit for centerset 7 3/16"(196mm) - 8 5/16"(212mm). Heavy Duty Construction Commercial Deck Mount Kitchen Sink Faucet With Brass Compression Cartridge to prevent cross flow..
  • 【Easy Installation】Built-in water sealing washer , no need to apply PTFE tape. Repair Kit ( spare washers and screws) and Deck Mount Install Kit Included..
  • 【25" Height Commercial Style Faucet】 with 1.42GPM Powerful Pre Rinse Spray Valve."No Screw" Design , Avoiding Latent Leakage Problem Caused by Corroded Screw..
  • 【Heat Resistant Steel Flexible Hose】Durable Stainless Pressure，With Food Grade Polyurethane Inner Tube.
  • 【8 Inch Swiveling Add On Spout】 for Complete Assess of Kitchen Sink.
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters

  • 【UNIFORM PORE SIZE】PTFE Syringe Filter with uniform pore size, high porosity and high retention efficiency. PTFE Syringe Filter Diameter: 13mm, Pore Size: 0.22µm..
  • 【HYDROPHOBIC PTFE MEMBRENA】PTFE needle syringe filters have PTFE membrane and natural hydrophobic. It also equips with broad chemical compatibility, strong chemical stability, inertia and hydrophobicity..
  • 【HIGH QUALITY FILTERS】They are easy to put on and take off which are suitable for high heat with high temperature & pressure resistance & gas exchange..
  • 【FEATURE】The PTFE syringe filters withstand the autoclave process several times, hydrophobic PTFE membrane with Polypropylene(PP) housing & great sheerness and thickness..
  • 【VARIOUS APPLICATION】PTFE Needle Syringe filters are broadly used in filtration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions. They are also suitable for gas filtration/filtering bacteria and other particulate, dyes..
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock