Top Ptfe Rod Tube

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

2 Meters Capricorn Bowden PTFE Tubing XS Series Low Friction for 1.75mm Filament PTFE Teflon Tube Cutter Pneumatic Fittings Silicone Socks and Nozzles for Ender 3/3 Pro/5/5 Pro/ 5 Plus 3D Printer

  • Original Authentic: 100% Original Capricorn XS Series Bowden tubing. High Lubricity Additives make our XS Series tubing the lowest friction Bowden....
  • Precise Print: Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less....
  • Excellent Performance: Capricorn Bowden tubing is designed specifically for 1.75mm filament, the filament is loaded smoothly to the hotend with as....
  • With accessories: PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions....
  • What You Get: 1*2 Meters PTFE Tube, 3*0.4MM Nozzle, 3*Sillicone Cover, 1*Big Fitting, 1* Small Fitting, 1* Tube Cutter. If you have any unsolvable....
Check Stock

Innovative Tip Down (Orange - Your Next All-in-One Ice Fishing Set Up (2-Pack)

  • ...ADE IN THE USA - It’s Compact, Built to last, and Simple to use and even Affordable!!.
  • THE INNOVATIVE TIP DOWN is a three-part ice fishing system that is compact when stored and easy to use when set up. Each Innovative Tip-Down comes with the following parts: The storage tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
  • THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
  • THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down....
Check Stock

Z Aventik Carbon Fly Fishing Rod Tube Case Aluminum Cap – fits Any 9ft 4pcs Fly Rod Matt Green

  • Tube inner diameter: 2.17inch / 5.5cm, Tube out diameter: 2.36inch / 6.0cm.
  • Tube length:30.7inch / 78cm, Fit for ant 9ft 4pcs fly rods or shorter..
  • Four Colors to Choose: Matt Gunsmoke, matt green, matt blue, matt coffee.
  • The high module carbon fiber tube with aluminium tube cap. Carbon rod tube weight is lighter than cordura rod tube and aluminium rod tube. Design with....
Check Stock

AMX3d PTFE Teflon Bowden Tube for 1.75 Filament (2.0mm ID/4.0mm OD) 2.0 Meters – White Connector Tubing for 3D Printer

  • IMPROVE PRINTS: Regular Bowden tube cleaning can cause wear, and extruder grinding reduces print quality. Replace your filament tubing to enhance print quality..
  • LOW FRICTION: Made from high quality, durable PTFE, the Teflon Bowden tube allows filament to slide better for smoother results..
  • HIGH SPEC: Withstanding temperatures up to 260C, this Bowden connector tubing has a density of 2.15-2.20g/cm3, with a 2mm ID and 4mm OD..
  • FLEXIBLE TUBING: PTFE Bowden tubes offer impressive flexibility – ideal for smoothly tracking the moving 3D printer head. Packaged without ties to prevent crimping..
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing partsof the highest quality. If there are any problems with your Bowden Tube just let us know!.
Check Stock

YaeMarine Fishing Rod Holder 316 Stainless Steel Fishing Rod Rack 3Tube/4Tube/5Tube/6Tube Mirror Finish for Marine Boat Yacht Camper (5 Tube)

  • 【High quality】: Made of marine grade 316 stainless steel,mirror finish,corrosion and rust resistance..
  • 【Easy installation】: Gimbal pin rod stopper,vertically mounted,easy to mount to wall, yacht or boat: Wall side mounted.Racks can be teamed together for multiply rod storage..
  • 【Great construction】: Rolled top and bottom edges - no sharp edges.
  • Solid construction - no moving parts. Gimble pin rod stop at bottom of rod holder.
  • 【Package Included】: 1- Pack rod holder, 4 Size opption: 3 Tube, 4 Tube, 5 Tube, 6 Tube Fishing Rod Holder,.
Check Stock

DONLAB EBT2 1000ml Glass Separatory Funnel Set, PTFE Stopcock with Steel Support Stand, Clamp and PP Holder

  • 1000ml glass separatory funnel with PTFE stopcork.
  • Stamping steel stand: 8"x5” | 21cmx12cm.
  • Rod height: 20" | 50cm, Road dia 3/8" | 10mm.
Check Stock

Mastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB - USAlab

  • ● This platinum plate electrode is widely used in electrochemical study. It is an important accessary for electrochemical work-station and three-electrode cell. Besides, the platinum electrode is also used as insoluble anode in electrolysis process..
  • ● The electrode is coated with PTFE (polytetrafluoroethylene), and the size of PTFE is 80mm × φ6.4mm. The terminal is gold-plated copper rod (15mm × φ2mm)..
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips

  • Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
  • The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
  • Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....
Check Stock

Moonshine Rod Co The Drifter Series Fly Fishing Rod Matte 5WT 10 4PC

  • HIGH-QUALITY CONSTRUCTION – Made with performance, medium action graphite and high-grade AAA cork grips. The cork grips have burled ends while the....
  • DYNAMIC 4-PIECE ROD – Cork grips keep this rod lightweight, while copper anodized hardware keeps the rod finish sleek and durable from the reel seat....
  • PORTABLE CANVAS TUBE – This rod comes with a durable, hard canvas fly rod tube. Embroidered with the Moonshine logo, this tube protects your fly rod....
  • DESIGNED FOR ALL SKILL LEVELS – Whether you’re a seasoned pro or just trying to land your first catch, Drifter Series Moonshine Rods are designed....
  • BUILT TO LAST – We understand your fly fishing adventures can present obstacles that can leave you dead in the water with a busted rod. When you....
Check Stock