Top Ptfe Seals O Ring

Kinetic Wares 151122 Oring Compatible with Big Blue, Pentek Pentair O-Ring OEM Size 6 Pcs w/Dow Molykote 111 O-Ring Lubricant and Scratch Free O-Ring Pick

  • Direct Replacement for Pentek 151122 O-Ring, 152032, 4001756, 151122-03, Culligan OR-100, and many others..
  • Replace O-rings at every cartridge change to avoid costly water damage, 6 Pack O-Ring Seals, Made of Buna-N Rubber the industry standard, 100% Money Back Guarantee.
  • Dow Molykote O-ring Silicone Lubricant improves sealing preventing water leaks, helps hold O-Ring in place during assembly.
  • 139mm inside x 148 mm outside and 4.5mm thick. That is 5-1/2” inside x 5-13/16” outside and just under 3/16” thick..
  • Non Scratch O-Ring Pick tool aids in removal of old O-rings while reducing the chances of scratching the filter housing O-ring groove..
Check Stock

POOLOOP Replacement Sand Filter Pump Parts Repair Set Compatible with Intex Sand Filter Pumps, Air Release Valve & O-Rings

  • ... 【Work Efficiently】With this Intex Replacement Repair Parts Set for Sand Filter Pumps, you can have your pool working again in perfect, clean, condition before the heat of the summer kicks in..
  • 【Say Goodbye To "Seal Leaks"】If your pump has seals that are leaking and it's affecting the operation of your swimming pool then choose our repair kit..
  • 【After-sales Service】Your satisfaction is our greatest motivation! If you have any questions, Please contact us through Amazon and we will provide you with a satisfactory shopping experience..
Check Stock

RED TEK LeakStop12 A/C Seal Treatment (4 oz. can)

  • Operation: Easy to use. Installs in minutes. Seals in seconds..
  • Lower Cost: Less expensive than replacing leaking o-ring and rubber seals. Saves time and money..
  • Compatibility: Compatible with most common refrigeration materials and lubricants including R134a, R12, metal components, mineral and synthetic(Ester and PAG) lubricants, seals, gaskets, hoses, compressors, and o-rings..
  • Environment: Helps environment by reducing refrigerant emissions..
  • Safety: Safe and easy to use. Less toxic than other seal treatments that contain poisonous methanol..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

Wilmad-LabGlass LG-9444-106 10mm PTFE Stirrer Bearing, Standard Taper 34/45

  • Complete assembly includes PTFE stirrer bearing, PTFE bushing, saddle O-ring, threaded heavy wall glass adapter, and top cap. See LG-9501 for polished stirrer rods or LG-9502 for stainless steel rods.
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 16.5mm to 20mm Stopper for 7.7mm Diameter Shaft Stirring Rod

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

MECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod 2Pcs

  • PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
  • In the package of: 2 x PTFE Lab Stirrer Bearing Adapter.
  • Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
  • It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
  • Please check if this size is what you need..
Check Stock

Upgraded Replacement O-Ring Seal Gasket for Gamma Seal Gamma2 2.0 Vittles Vault 10' Lids (Pack of 2)

  • Thicker Upgraded O-Ring for Better Seal and Higher Durability. Tight Fit & Seals Better than Original!.
  • Made in the USA. Buna Nitrile Rubber Orings. Solid core & continuously molded (no seams, no glue)..
  • Excellent Resistance to Cooking Oils, Petroleum Products, and Latex & Oil Based Paints..
  • Temperature Range -58 F to 248 F with Intermittent Service to 600 F. Color Black..
  • Replaces the Threaded Lid Seal for Vittles Vaults and 2 Gallon Buckets. O-ring Gasket Seals Only. Lid and Bucket are NOT Included..
Check Stock

Captain O-Ring - Replacement for APEC ROES-50 ORing Set for APEC Reverse Osmosis RO Water Filter Housings (4 Pack)

  • Contains 4 o-rings for APEX Ultimate and Essence RO Systems (Includes ROES-50).
  • Replacement o-rings (also called seals or gaskets) are used to repair your leaking water filter housing.
  • O-Rings have an approximate outside diameter of 3-5/8″ (inside diameter approximately 3.36″).
  • Manufactured and Warrantied by Captain O-Ring LLC.
  • Refer to product images to show where this o-ring fits on the filter housing..
Check Stock

Buna-N O-Ring Kit, 90A Durometer, 30 Sizes (Pack of 382)

  • ...ther, ester, ozone, sunlight and weathering, so it should not be used in ozone-producing motors, welding equipment, or applications exposed to ultraviolet light..
  • [Circular Cross Section]-The nitrile rubber O-ring is round, and the cross section is round. Designed for various sealing applications. Pressure and fluid seals are usually provided between cylindrical overlapping mating surfaces, commonly found in engines, faucets, flanges, valves, and various cylinders..
  • [Features]-Soft and elastic O-ring, simple buckle, easy to install. Nitrile rubber O-rings can meet most pipeline, automotive and general maintenance needs..
  • [Easy to Use]-This nitrile rubber (NBR) sealing ring has abrasion resistance, pressure resistance, high temperature resistance, oil resistance and waterproof ring seal. You can use it in many places in your daily life and work. We have various thicknesses and sizes for you to choose from..
  • [Application]-Rubber O-rings are mainly used for power supplies, control boxes, universal power cord socket protection, electrical appliances, motors, tools, cars, trucks, trailers, electronic equipment, toys, bicycles, RVs, boats, pumps, furniture, etc..
Check Stock

QLOUNI 826 Piece Universal O-Ring Kits Assortment SAE + Metric Rubber NBR O-Ring Gasket Set for Plumbing, Automotive and Faucet Repair + 4 Piece O-Ring and Seal Remover

  • ★[Function] This O-Ring Assortment Set holds 407pcs SAE standard rubber o-rings and 419pcs metric universal standard rings Provides sealing and prevents leaking for a wide range of applications such as plumbing, machinery, hydraulic & pneumatic repairs and much more..
  • ★[Oil Seal Hook] We offer 4pcs extra hook and pick set, it will allow you to easily remove O-Rings and various seals and bushings. The long shaft allows you to access areas that conventionally sized hook and picks just can't reach. These long hooks and picks are perfect for removing hoses, moldings, clips, clamps, seals, O-rings, cotter pins, gaskets and more!.
  • ★[Premium Quality] High quality rubber construction gives these o-rings oil and UV resistance,make rings with extra thick wall design provides long-term use..
  • ★[O-Ring Assortment] Metric standard have 32 sizes from 3 mm I.D. to 50 mm I.D. SAE standards have 32 sizes from 1/8” I.D. x 1/4” O.D. to 2” I.D. x 2-1/4” O.D..
  • ★[Convenience in storage] Each type one comes in a heavy-duty plastic storage case that keeps each size separated and organized.
  • Red box for SAE rings and Blue box for metric rings for you clarify easy..
Check Stock

KOOTANS 1200Pcs Nitrile Rubber O Ring Kit 24 Sizes O Rings Assortment Kit Set Sealing Washer NBR Metric o-Ring Assortment for Plumbing, Gas, Automotive and Faucet Repair, Resist Oil and Heat O-Rings

  • ...ar resistant, anti static. Durable and long service life. Great heat resistant performance: -40℃ (-40℉) to 120℃ ( 248℉)..
  • 【PRODUCT FEATURE】Soft and flexible o rings, simply snap on, easy to install. With 1 set of high quality O-ring sealing hooks as a gift --- it can let you to remove o rings and various seals easily. The two ends of the aluminum alloy rod can install two hooks to meet your different needs..
  • 【POPULAR SIZES】24 Popular Sizes O-Ring Sealing Washer. You may not don't know what size you need. Fortunately, all the sizes of this O-ring kit are enough to allow you to cope with various family needs. Metric sizes from 6mm to 28mm O.D., according to different sizes provide 1.5mm/2.4mm/3.1mm 3 reasonable thicknesses. For more details, please refer to our size picture..
  • 【CONVENIENT STORAGE】1200 pieces NBR rubber o rings are stored in a sturdy transparent plastic box with labels, saves you effort in tidying up and choosing sizes. And 1200 pieces are enough that will keep you going for months or even years. You don't have to go to a hardware store..
  • 【WIDE APPLICATION】Nitrile rubber metric o rings prevent leaks in fuel or water plumbing, machinery, hydraulic, and pneumatic connection.
  • provide secure seals for any oil, air, gas, a....
Check Stock