Top Pull Stud Collet

Lisle 28950 Truck Wheel Stud Installer

  • Fits truck wheel studs up to 22 millimeter (7/8") in diameter.
  • Use the lug nut to tighten against the tool body to pull the stud in position.
  • The tool body is equipped with a thrust bearing to easily pull the new wheel stud into place.
Check Stock

Astro Pneumatic Tool 78835 Exhaust Pipe Stretcher Kit

  • Impact driven Heavy-Duty expander allows for fitting smaller exhaust piping and making exhaust seals.
  • 28mm size bolt head drives the tool and collet sets to expand pipes from 1-5/8" to 4-1/4".
  • Apply included grease to threads before use, impact wrenches rated for 800 ft-lbs tightening and above recommended to do most jobs.
  • Includes: Steel expander 1 5/8" - 2" Collet Steel expander 2" - 2 1/2" Collet 2 3/8"- 2 3/4" Collet 2 3/4" - 3 1/8" Collet 3 1/8" - 3 1/2" Collet 3 1/2" - 3 7/8" Collet 3 7/8" - 4 1/4" Collet.
Check Stock

Oumefar 15Pcs ER11 Spring Collets Set High Precision Workholding Engraving Collets for CNC Engraving Machine & Milling Lathe Tool

  • SPRING STEEL ER11 COLLETS SET: The Spring Collet is made of high quality spring steel, they are stable in performance.
  • HIGH PRECISION SPRING COLLETS SET: Fine workmanship, good elasticity, high precision.
  • WORKHOLDING ENGRAVING COLLETS: Collet must be placed into collet chuck nut before inserting into collet chuck.
  • INDIVIDUALLY PACKAGED COLLET SET: Each collet is well packed in separate protective container with label.
  • WIDE APPLICATION SPRING COLLET: The Collet Set is suitable for CNC milling lathe tool and work-holding engraving machine.
Check Stock

Mophorn Dent Puller Stud Welder Dent Repair Kit 110V Stud Welder Kit 800 VA Spot Welder 1000 Nails for Car Body Panel

  • ...can hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of the cast iron slide contributes to comfortable grip..
  • One-handed Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state. And this stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small and can be used flexibly in any position..
  • Wide Application: No matter what type of vehicle it is, cars, trucks, vans, our stud gun dent puller kit can target car collision damage. Such as repair metal elastic deformation, plastic deformation, direct damage, and partial indirect damage. It is also suitable for other metal deformation repairs..
Check Stock

Strong Hand, 3-Axis Fixture Vise with Quick Acting Screw, Two Stand-Offs,\Swing Away\ Arm with 4.75-Inch Miter Joint, 3.92-Inch T-Clearance - WAC45-SW

  • 5C-CB 5C Collet block set is made of superior high-speed steel. These square collet block, hex collet block have excellent wear resistance, high hardness and high precision..
  • 5C-CB 5C Collet block set is easy to be used and carried, overall dimensions: 1-3/4 x 1-3/4 x 3-1/4.
  • Capacity for standard 5C collet: 1/16 ~ 1-1/16.
  • 5C-CB 5C Collet block set is easy to quickly set up on milling machines, lathes, surface grinders and drilling machines, providing you with a simple operation experience..
  • 5C Collet block set including 1 piece of hex collet block, 1 piece of square collet block, 1 piece of quick clamping handle and 2 pieces of quick-acting rings..
Check Stock

Lanzeuta 1/2-Inch Shank Router Bit Collet Extension Chuck, Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet, ER20 M Type Collet Chuck Wrench - Set of 4

  • Package Content -- 1 x 1/2-Inch Shank Router Bit Collet Extension Chuck, 1x ER20 1/2" Collet, 1 x ER20 1/4" Collet, 1 x ER20 M-Type Collet Chuck Wrench Spanner, which can make you more efficient to process products.
  • Durable Material -- The adapter and ER20 Spring Collet are made of high-speed steel material, resistant to high temperature and corrosion, stable performance. ER20 M-Type collet chuck wrench spanner is made of high carbon steel with an anti-slip handle design.
  • Designed of Safe -- Reduce the risks of an incised wound by withdrawing the shank from the collet. Meanwhile, extend the bit to provide the full depth of cut. Just place the router collet extension shank in the 1/2-inch router collet and the router bit shank in the extension collet and tighten both..
  • Ideal Application -- Our router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. And it can extend the working depth of the router bit by an additional 2-1/4 inches. Suitable for woodworking trimming, milling, and engraving machine..
  • Purchase with Confidence -- Lanzeuta provide a full refund for any reason within 90 days after the date of purchase. If you have any questions, we offer 24hrs customer service. This is our confidence in product q....
Check Stock

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

MOSTPLUS 28mm Exhaust Pipe Expander Stretcher Tool Set 1-5/8" to 4-1/4", Expander Tool for Tail Pipe Tube with Storage Case

  • [ Package Include ] --- 1 x Exhaust Pipe Stretcher Expander Kit & 1x Carry Case.
  • [ Material ] --- All collets are made of Aerospace-grade 6061 Aluminum, while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity then extended service life.
  • [ Function ] --- Used to expand the low-carbon steel exhaust pipe, and make the exhaust seal with a smaller diameter pipe.
  • [ Expanding Range ] --- The exhaust pipe stretcher offers various collets for a broad expansion range includes: Steel expander 1 5/8"-2" Collet.
  • [ Easy Opeartion ] --- Choose a proper collet, clamp the pipe, then expand the pipe. Use 1/2" or 3/4" impact wrench will save more effort.
Check Stock

Fumrtcy Exhaust Pipe Expander Stretcher Tool Kit 1-5/8' to 4-1/4', Muffler Pipe Spreader Tool Set for Tail Pipe Tube

  • Function --- Used to expand the low-carbon steel exhaust pipe to make perfect exhaust seals with smaller diameter piping..
  • Material --- All collets are made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment, ensuring rugged rigidity then extended service life.
  • Wide Expandinig Range --- In the tool set offers various collets, To extend the exhaust pipe from 1-5/18" to 4-1/4". Includes:Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Easy Opeartion --- First step: Choose the proper collet. Second step: clamp the pipe. Third step: and then expand the pipe. Use a 1/2" or 3/4" impact wrench to save even more effort.Operation of our stretcher kit is really that simple!.
  • Service Guarantee --- We hope to bring you a satisfying shopping experience. If you have any question, please feel free to let us know.Hope you can find what you want here and enjoy your shopping..
Check Stock

Prokomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube

  • ◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
  • ◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
  • ◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
  • ◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
  • ◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..
Check Stock

Mophorn Stud Welder Kit 1600A Stud Welder Dent Repair Kit 800VA Spot Welder Stud 110V Welder Stud Kit Stud Gun Dent Puller Kit with Complete Accessories Dent Welder Repair for Auto Body Repairing

  • ... hold the pin firmly without sliding, and its handle is made of vinyl, which is non-slip and can be held firmly. Also, the weight of cast iron slide contributes to comfortable grip..
  • One-handed Simple Operation: Adopts touch switch design, just press the trigger, then you can successfully weld the nails. Change to a pull hammer, hang the hammer on the nail, and you'll be able to pull the metal of the vehicle back to its normal state..
  • Useful Accessories Included: This stud gun dent puller kit has complete accessories, which can solve all the common dent problems of vehicles. It is small in size and can be used flexibly in any position. The tool box makes the welding accessories neat and portable..
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock