Top Pulley Bearing Removal Tool

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

MOSTPLUS Damper Crankshaft Crank Pulley Holder Wrench Holder Removal Tool Compatible with Honda Acura Harmonic 50mm

  • MOSTPLUS 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt compatible with Honda and compatible....
  • Used with a 1/2 inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing....
  • The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or....
  • Used when loosening/tightening the retaining bolt.
  • Detailed fitment below, pls check it before purchase.
Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

  • 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
  • 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
  • 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
  • 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
  • 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • ...istant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
  • PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar.
Check Stock

ABN 3-Jaw Gear Puller 4-Piece Set – 3in, 4in, 6in, 8in – Removal Tool Kit for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Set]: Use the ABN 3, 4, 6, and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

Lisle 59370 Stretch Belt Remover / Installer, Slip-Joint Pliers Found In: Tools & Home Improvem

  • Combination of removal and installation tool for most stretch belt applications.
  • Unique magnetic faces hold the tool in place on the pulley.
  • Compact one-piece tool can be used on the front or back side of the pulley.
Check Stock