Top Pulley Crank Shaft

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

ARU Crank Pulley Tool Kit Screw Wrench Holder,Compatible with Subaru Imprezas 93-18 (EJ Engines only)

  • New V2 design has upgraded small pin reinforcement ring for loosening the toughest crank pulley bolts.
  • Integrated low profile handle allows you to easily remove your crank pulley with the radiator still in the car.
  • 2 sets of removable pins allows you to remove either style crank pulley found on applicable models.
  • Comparable and can be used in place of factory tools #499977000, 499977100, #499977300, and #499977400.
Check Stock

Ford Racing M-8600-M50BALT Alternator Kit for Ford Mustang Boss 302

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Installing this BBK Performance Underdrive Pulley is one of the Easiest Ways to Gain Approximately 8-10 Horsepower.
  • Direct Replacement Pulley Kit Requires a New Shorter Length Serpentine Belt and Will Not Affect Cooling or Charging of the Vehicle.
  • Premium Quality CNC Machined Lightweight Crank Pulley Kit Adds Great Looks and Performance.
  • 1 Pc Kit Includes Crank Pulley Only, All Hardware and Instructions for Simple Installation.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warran....
Check Stock

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

  • ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
  • Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
  • ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
  • ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
  • ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..
Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

  • ... of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
  • PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
  • EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch shaft adapter 7/8 to 1 crankshaft adapter.
  • PARAMETER INTRODUCTION: The crankshaft sleeve adapter is about 3 inches long and includes the step key required from 1/4 keyway to 3/16 keyway. An adapter and keyway, the wider part of the key is located in the adapter, convenient and practical for briggs and stratton crankshaft adapter.
Check Stock

MOSTPLUS Damper Crankshaft Crank Pulley Holder Wrench Holder Removal Tool Compatible with Honda Acura Harmonic 50mm

  • MOSTPLUS 50mm crankshaft pulley holder tool is designed to aid in the removal and installation of the crank bolt compatible with Honda and compatible....
  • Used with a 1/2 inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing....
  • The tools design features a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or....
  • Used when loosening/tightening the retaining bolt.
  • Detailed fitment below, pls check it before purchase.
Check Stock

77080 Harmonic Balancer Socket Tool 19mm Fits for Honda Use with 1/2 drive & 50mm Crank Pulley Wrench Holder Crankshaft Pulley Removal Tool Fits for Honda Acura

  • 【Application】19mm Harmonic Balancer Socket used in conjunction with a 1/2-inch drive for Honda engines using 19mm hexagonal pulley damping bolts....
  • 【Function】19mm Harmonic Balancer Socket is suitable for removing the lug nuts from the tightening wheel. 50mm Crankshaft Crank Pulley Wrench....
  • 【Advantages】19mm Harmonic Balancer Socket has thicker walls reduce bending and vibration to provide maximum torque. 50mm Crankshaft Crank Pulley....
  • 【Superior Material】Made of sturdy, heavy-duty steel with black coating, anti-corrosion for professional level reliability and durability. Ensure....
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products,....
Check Stock

Finish Line Gear Floss Microfiber Cleaning Rope (Pack of 20 microfiber ropes)

  • The ultimate detailing tool! Perfect for cleaning your rear cassette, front chain rings, derailleur pulley wheels, hubs and spindles, brake arms, bottom bracket / crank interface, and more..
  • Gear Floss' Microfibers work by attracting, removing and holding grime. Other materials simply move it around. Microfiber captures dirt, grease and particles inside its star-shaped grooves and remove grime better than any other material..
  • Microfiber rope is highly tear-resistant and it is washable..
  • Easy to Use! Position floss between gears Slide back and forth Slide into other hard-to-clean areas like derailleur pulley wheels, hubs and spindles, brake arms, bottom brackets /crank interface, etc..
Check Stock

TOYAN FS-L400 14cc Inline Four-Cylinder Four-Stroke Water-Cooled Nitro Engine Model DIY Assembly Kit for 1:8 1:10 1:12 1:14 RC Model Car Ship Airplane - KIT Version

  • Integrated Crank Shaft: It utilizes a 180-degree crankshaft. The ignition timing sequence of 1342 for running smoother and more sensitive acceleration response. The maximum speed is 13,500 RPM..
  • Double Synchronous Pulley: The timing structure of the dual synchronous pulley reduces the risk of gear jumping during high-speed operation. / Precision Rocker Arm: Alloy rocker arm and independent intake and exhaust design for more accurate valve switch..
  • Built-in Mechanical Pump Water-Cooled Kit: The power of the pump body comes from the crankshaft, and the pump body provides circulating power to the coolant. Later, it can cooperate with the cooling fan to enhance the self-cooling performance / Precision Carburetor: Independent four carburetors for more accurate tuning, more sensitive throttle response, and working more stable.
  • High Precision Gear Pump: High-speed structure design & corrosion-resistant material manufacturing. Large flow water pump provides powerful cooling capacity. / Lightweight: It can be better compatible with the RC model and improve the unit power output ratio.
  • Starter Kit: The engine comes with an electric starter kit, providing users with all new fun..
Check Stock

Phoenix V-Belt Pulley - 5/8in. Bore, 4 1/2in. Outside Dia.

  • Price For: Each Set Screw Included: Yes Construction: Spoked Number of Grooves: 1 Item: V-Belt Pulley Pulley Bore Type: Fixed Bore Pulley Type: Standard V-Belt Pulley For V-Belt Section: 3L, 4L, A Bushing Required: None Pulley Material: Die Cast Zamak 3 Pulley Bore Dia.: 3/4" Pulley Outside Dia.: 7.00" 4LA or A Belt Pitch Dia.: 6.85" Keyway Size: 0.187" x 0.093".
  • 4L, A, or AX Belt Pitch Dia.: 6.85" 3L Belt Pitch Dia.: 6.55" Fits Shaft Dia.: 3/4" Country of Origin (subject to change): United States.
Check Stock

2Pack Pulley Block U 304 Stainless Steel Pulley Roller, 2 Inch Heavy Duty Duplex Bearing Silent Grooved Wheel Loading 880lb/400Kg for Material Handling and Moving

  • 304 Stainless Steel Pulley Block: Premium U groove wheel is made of 304 stainless steel, corruption resistant and safe, which has higher strength, super capability and high quality enhance anti-deformation..
  • Perfect Size: Wheel diameter is 2 inches, total height is 2.1 inches, the distance between U groove and the braket is 0.86 inches (More size detail can be checked in the picture)..
  • Easy Installation: The nut disassembly method is more convenient than the installation method of the circlip shaft, and the pulley wheel installation is simple and convenient, The nut is not easy to loosen, and the pulley adopts self-locking screw to lock the rotating shaft. Just need to mark the hole location, drill 2 holes with a 10 mm drill a bit in the wall and insert the yellow expansion pipes in the holes, finally, fix the pulley with the self-tapping screws..
  • Super Mute Duplex Bearing Design: The bearings inside lower the friction, making the rolling more quiet and smoothly.The Silent Duplex Bearing can greatly reduce the friction of the cable pulley and make the cable pulley rotate smoothly and stably. You can hardly hear the sound when it works..
  • Wide Application: The Wall Mount Pulley Block is widely used for home fitness, wire rope traction, DIY attachment for h....
Check Stock