Top Pulleys For Winches

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

DC Cargo Mall Combination Winch Bars Square Head | Carbon-Steel Construction and Non-Slip Handle | for Winches on Flatbeds and Trucks | 2-Pack

  • HEAVY: 6.6 lb. carbon-steel construction makes the winch bar a strong and reliable flatbed tool. Fits standard winches..
  • EASY: 40.5 inch length provides maximum leverage. Non-slip handle has ridged surfaces to provide a firm grip..
  • Combination winch bar has a square head and knurled non-slip handle for releasing tension on winches/load binders. Chrome finish..
  • VERSATILE: Combination bar can be used for winches AND load binders. Tapered, angled end easily tightens and releases winches. Square head helps tighten and release chain load binders..
Check Stock

DC Cargo Mall Four Weld-On Winches for Flatbed Trailer | Heavy Duty Standard Tie-Down Winches

  • USE FOR TOUGHEST LOADS – Trust these four (4) robust flatbed winches to hold your load tight even when your truck meets a rough road. Heavy-duty steel winches apply strong tension to the strap to hold the toughest loads. Powder-coated for long-lasting corrosion resistance..
  • PERMANENT INSTALLATION – Weld-on winches provide a permanent tie-down system for your truck or trailer..
  • PRECISION ENGINEERED: Bottom mount. Standard profile fits up to 30 ft of strap. Fits winch straps up to 4 inches. Dimensions: 5.5” tall x 3.5“ wide x 8” long..
  • EVERYTHING YOU NEED IN A TIE DOWN WINCH – Strong, reliable, and corrosion-resistant. Includes (4) winches. Assembly break strength: 16,500 lbs. Working load limit: 5,500 lbs..
  • Tie-downs meet or exceed DOT requirements..
Check Stock

Winch Cover, 8000-10000 lbs Winches, Black Neoprene for Off-roading 4x4

  • Compatibility:(LxWxH)23.5” x 9.5” x 7.5”. Check your winches dimensions for proper fit. It can be used for a variety of winches in the 8,000 to the 13,000-pound capacity range..
  • Protection: Made of oxford fabric which is water-resistant, dust-proof. This winch cover for electric winches can against stains, dirt, and moisture that can gather due to rain, snow, hail, etc. UV resistant design..
  • Resistant:Made of premium hydrophobic material and bound edges give full protection for the cover from cracking.Keep your electric winch in neat and perfect condition, protecting it from water, dust or anything else that could harm it..
  • Speciality:Unique fluorescent material.It absorbs light at night, and the STEGODON logo glows in fluorescent colors.This will definitely make you the most watched person of the night..
  • All winches accessories come backed by a lifetime technical support and one-year limited warranty.If there is any problem during the purchase period, please contact us at any time, and we will provide the most professional and timely service..
Check Stock

Rough Country Black Universal Winch Cover Logo - RS106

  • UV treated, protect Winches from sun damage. Made of durable polyester, solid and durable, have long time service.
  • Waterproof protect your Winches are intact from rain, water damage..
  • Cover Size: 58 X 26 X 18 cm (23 X 10 X 7 inch)..
  • For most winches in the 8,000 to 17,500 pound capacity range..
  • Made of Heavy 600 Denier Oxford textile, Durable, Heavy Duty and Deluxe.
  • Protects against rain, snow, sun, bird poop, tree sap and dirt and won't crack in cold weather..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

KEEPER - 36” Winch Bar Chrome - Use with Bolt-On or Weld Style Deep Storage Winch

  • Winch Bar is designed to use with bolt-on or weld style deep storage winches to tighten the winch strap and release load binder.
  • Additional Features: Features a knurled non-slip handle and a tapered, angled grooved tip for a secured easy handling and operation.
  • Ease of Use: Winch bar has a tapered, angled end for easy operation.
  • Operation: Easily releases load binders and tension winches.
  • Compatibility: Compatible with Keeper model #04928 weld mount trailer winch and other standard weld mount trailer winches.
Check Stock

Serpentine Pulley System for Ford 460 - Alternator & Power Steering Applications

  • Polished Billet Aluminum Pulleys & Brackets.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Saginaw Power Steering Pump with Keyway Shaft.
  • Belts and Accessories (Alternator, PS Pump and Compressor) NOT Included.
Check Stock

Chevy Big Bock Serpentine Kit - Alternator & Power Steering Applications

  • Polished Billet Aluminum Pulleys & Brackets.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Long Water Pump and Saginaw PS Pump with Keyway Shaft.
  • Belts and Accessories (Alternator, PS Pump and Compressor) NOT Included.
Check Stock

Chevy Big Bock Serpentine Kit - Alternator, Power Steering & A/C Applications

  • Polished Billet Aluminum Pulleys & Brackets.
  • 8 Rib Serpentine Pulleys for Increased Grip and Performance.
  • Includes All Pulleys, Brackets and Hardware for a Complete Installation.
  • Requires Long Water Pump and Saginaw PS Pump with Keyway Shaft.
  • Belts and Accessories (Alternator, PS Pump and Compressor) NOT Included.
Check Stock