Top Pump Ejector

Star JHU10S High Pressure 1 HP Shallow Well Jet Pump, Cast Iron, Made in the USA using a Majority of US Content

  • 1 HP cast iron shallow well jet pump made in the USA with a majority of US components.
  • Provides additional volume and higher pressures needed for well pump and lawn sprinkling applications (See capacity charts for specific performance).
  • 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
  • Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
  • 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check Stock

Aquastrong 1HP Shallow/Deep Well Jet Pump, 1554GPH, Cast Iron, Well Depth Up to 25ft/90ft, 115V/230V Dual Voltage, Automatic Pressure Switch

  • Convertible well pump. This pump is designed for shallow wells (0-25 feet) or deep wells (26-90 feet) and includes venturi and ejector kits. The maximum head can reach 164 feet, and the maximum flow can reach 1554GPH (26GPM). Suitable for variety of scenarios such as domestic water use and irrigation..
  • Available in two voltages, 115V and 230V (default 220V). The stable motor makes it more efficient and energy-saving, which greatly reduces the follow-up expenses and maintenance costs. A great choice for replacing old pumps..
  • Temperature sensing with outomatic overload stop. If the water shortage operation causes abnormally high temperature, the detector will send a signal to stop the pump to ensure the safety of the product..
  • A pressure switch with a 30-50 psi pressure setting range activates the pump in the power circuit when rise and fall thresholds are reached. A pressure gage is installed on the shell to facilitate timely observation of water pressure..
  • Solid cast iron housing ensure the durability and high performance of this product. This product comes with a two-year warranty. Aquastrong customer service provides professional installation and maintenance supports..
Check Stock

Star 4EP Sewage Pump with Non-Clogging Vortex Impeller 0.4 HP Passes 2 Inch Solids Thermoplastic Sump Pump with Float Switch

  • 0.40 HP Sewage ejector pump moves wastewater fast and has a max flow rate of 4,920 gallons per hour at 5’ of lift, 3,180 GPH at 10’, and 1,920 GPH....
  • Bottom suction inlet with anti-clog vortex impeller provides 2” (50 mm) solids pumping capacity and is designed for reliable clog free operation.
  • High efficiency oil free motor runs cooler and lasts longer plus is environmentally friendly (115 Volt / 5.5 Amps).
  • This septic sump pump is thermal overload protected against overheating, has a temperature rating of 110° F (43° C), and is double sealed for....
  • Features a heavy duty and corrosion resistant thermoplastic body, vertical float switch, waterproof power cord with grounded plug, and a standard 2....
Check Stock

THE BASEMENT WATCHDOG Model KCV1 1-1/4 in or 1-1/2 in Klunkless Sump Pump Check Valve

  • Silencing air chamber reduces the loud CLUNKING sound when your sump pump shuts off.
  • Check valve installs easily on both 1-1/2” and 1-1/4” pipes with no gluing required.
  • Airtight chamber helps prevent water re entry back into the sump pit.
  • Includes stainless-steel hose clamps for easy installation.
  • Ground water use only. Not for use in sewage or ejector pits.
Check Stock

RainBro 1 HP Cast Iron Convertible jet well pump, Deep Well Pump with Ejector Kit, Model# CCW100

  • GREAT PERFORMANCE - 1 hp, max. flow rate is 910 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports..
  • AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation..
  • DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box..
  • DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit..
  • WORRY FREE – 2 year manufacturer's warranty..
Check Stock

RainBro 3/4 HP Cast Iron Convertible jet well pump, Deep Well Pump with Ejector Kit, Model# CCW075

  • GREAT PERFORMANCE – 3/4 hp, max. flow rate is 720 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports..
  • AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation..
  • DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box..
  • DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit..
  • WORRY FREE – 2 year manufacturer's warranty..
Check Stock

RainBro 1/2 HP Cast Iron Convertible jet well pump, Deep Well Pump with Ejector Kit， Model# CCW050

  • GREAT PERFORMANCE – 1/2 hp, max. flow rate is 310 gallons per hour @ 40 psi, 1-1/4 in. suction and 1 in. discharge and drive ports..
  • AUTOMATIC OPERATION - Pressure switch is pre-set at 30-50 psi for automatic operation..
  • DUAL VOLTAGE - 115V/230V motor, factory set for 230V with the quick change voltage selection switch inside motor cover box..
  • DURABLE - Rugged cast iron pump body for durability and dedicated priming port for volute filling, and includes ejector kit..
  • WORRY FREE – 2 year manufacturer's warranty..
Check Stock

WHDZ Rods Auto Body Dent Repair Hail Damage Removal Tools Dent Hammer for Door Dings Hail Repair and Dent Removal (6 Pieces)

  • ...d Materials】: Stainless Steel, not easy to bend,not rust,very sturdy and durable.will not damage at the original paints.You need not to repaint the surface of the vehicle.
  • 【Diverse Design】:Sharp, Flat & Round Ends.
  • diameter: 4mm-6mm, Length: 26cm-57cm，Note: The size of this set is as shown in the figure. The ejector pin is thinner than other ejector pins and is suitable for small dents. And it can withstand a limited weight.If you need to repair large dents, please choose a large ejector set. For example, the A and B models of the ejector set..
  • 【Can Be Widey Use】: Our Paintless Dent Repair Tool is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine Body etc.
Check Stock

Star ES05S 1/2 HP Cast Iron Shallow Well Jet Pump - Made in the USA with a Majority of U.S. Content

  • Cast iron 1/2 HP shallow well jet pump made in the USA with a majority of U.S. Content.
  • Designed for single pipe shallow wells with suction lifts from 0' to 25 feet, provides up to 930 GPH (3,520 LPH) and pressures up to 50 PSI.
  • Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
  • 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
  • 100% factory tested and covered by Star Water Systems 2-year limited warranty.
Check Stock

Dualit Classic 2-Slice Toaster, Charcoal

  • Ejector system keeps toast warm until the ejector lever is pushed up.
  • Extra-wide, 28-mm slots accommodate a variety of bread products.
  • Award-winning ProHeat elements increase toasting efficiency and element longevity.
  • adjustable rear foot.This toaster is fitted with heavy duty elements made from the finest quality clear mica, and 80/20 nickel chrome.
  • Switch-system controls the degree of browning.
Check Stock

Dualit 2-Slice Toaster Chrome

  • Award-winning ProHeat elements increase toasting efficiency and element longevity. Dimensions (inch): 10.2 x 8.2 x 8.6 and Slot width is 1.1 inch.
  • Ejector system keeps toast warm until the ejector lever is pushed up.
  • adjustable rear foot. Switch-system controls the degree of browning.
  • Slot size: 28mm wide x 140mm high x 120mm long (front to back), Materials: Cast aluminium ends, stainless steel body.
  • Defrost setting gently warms frozen bread ready for toasting. Bagel setting to warm on one side and toast the other. High lift mechanism to remove small items easily.
Check Stock

CellTreat Brand 2mL Aspirating Pipet, Individually Wrapped, Sterile, 400/CS

  • Kit facilitates aspiration of liquids from various lab containers when used with the Gilson Safe Aspiration Station (sold separately).
  • Comes with a handle, tubing set, holder, stainless-steel needle adapter, tip adapter, tip adapter with tip ejector, eight-needle stainless-steel adapter, and eight-tip adapter with tip ejector.
  • Tip adapters and ejectors are compatible with Diamond DL10, D200, DFL10, DF30, DF100, and DF200 pipette tips.
Check Stock