Top Pump Fitting

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • The HEYTUR inflatable stand up board valve adapter will allow you to connect any standard electric pump, foot pump or compressor to the schrader valve fitting, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the....
Check Stock

Gas Siphon Hose Pump Shaker Siphon for Gasoline Fuel Water Transfer Safe Multi-Purpose Self Priming Pump 6 Foot High Grade Hose 1/2' Valve

  • 【High Quality】This hand Transfer Siphon Pump is made of kitchen-grade anti-static PVC tubing which provides easy reach into containers, petrol resistant, avoid corrosion. It features a 2.5mm (1/10 inch) thick hose wall, a 6 foot long tube, and a high-quality brass fitting..
  • 【Multi-Use】This siphon hand pump is ideal for emergency gas transfer, it can transfer any liquids like gasoline, oil, diesel, water, beer and so on. A good tool at home for multiple usage. You never have to start the siphoning process with your mouth again, it’s extremely dangerous and grossly inefficient..
  • 【Safe Notice】This siphon pump for gasoline not for use on salt water or copper corroding chemicals. When you put fitting end into the container( you are siphoning from), must keep it inside of the container not just on the surface and the fluid you are trying to get rid of has to be up HIGHER than the bucket you are flowing into..
  • 【Easy to Use】The Siphon Pump is easy to use, No more sucking on tubes that can put you in contact with dangerous fumes and liquids – simply insert the brass valve into the container to be siphoned from, shake it in an up and down motion, and the liquid will begin to flow! To stop the flow, remove the fitting end from the liquid. Light....
Check Stock

Aquascape Dual Union Check Valve 2.0 for Pond, Waterfall and Water Feature Pumps | 48026

  • The innovative AquascapePRO Dual Union Check Valve 2.0 provides a professional pump and plumbing connection inside skimmer filter systems, as well as Pondless Water Vaults..
  • The heavy-duty, swing-style check valve flapper maximizes water flow through the valve when open, while preventing the backflow of water when the pump is shut off or during a power outage..
  • Union connections on both both sides of the valve make pump and filter maintenance quick and easy without the use of tools..
  • Height extendable for larger filters and pumps. Height extendable for installation taller filters.
  • (2) - 2" MPT x 2" Slip Fitting, (1) - 1.5" FPT x 2" Slip Fitting.
Check Stock

Vobor Inflatable Boat SUP Pump Adaptor Standard Conventional Black Air Valve Adapter Attachment Air Pump Converter for Inflatable Rowing Boat Stand Up Kayak Paddle Board

  • Leightweigh DesignThe Inflatable Boat SUP Pump Adaptor adopts fine workmanship and delicate design, convenient to use..
  • Sturdy and DurableThis Boat SUP Air Valve Adapter is made of high quality of Copper and rubber, resistant high pressure, durable to use..
  • Widely UseOur Air Pump Converter fits most paddleboards, canoes, rubber boats, assault boats, flushing pools, floating rows, inflatable beds, dinghy, kayak, etc..
  • Quick InflationInflatable SUP valve adaptor, easy conversion, quick inflation.Use your compressor or tire pump to easily reach suggested PSI within 5-10min..
  • Instructions With the valve in the closed position, insert the Schrader valve fitting and rotate to lock in place. Remove the cap on the fitting, and connect a standard electric pump.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand until it becomes difficult to pump, and then use the adaptor to top off the pressure..
Check Stock

Kyostar 380LPH High Pressure Fuel Pump Inline Fuel Pump E85 Compatible Fuel Pump Universal Replace Fit for AN10 Inlet/ AN8 Outlet

  • Extemally Mounted in rear center of the car or truck.
  • Can be installed along with a high performance walbro intank fuel pump or alone..
  • Dimension: Length: 125 mm (main body) 146 mm (fitting seat to fitting seat).Diameter: 60 mm. Inlet : M18x1.5 Metric.Thread Outlet : M12x1.5 Metric.
  • The Fuel Pump Flow and pressure: 370 LPH at 3 Bar (45 PSI),340 LPH at 5 Bar (73 PSI) 8 Bar max..
  • Inline Fuel Pump Current draw: 9 Amp at 3 Bar, 13.5 Amp at 5 Bar..
  • Kyostar 044 Style 380LPH High Pressure Inline E85 Compatible Fuel Pump Universal Replace Fit for AN10 Inlet/ AN8 Outlet.If you have any question about our product,please contact us right away..
Check Stock

Raincovo Chemical Injector Kit, Soap Injector for Pressure Washer, 1/8 Inch 27 Male BSP Thread

  • Chemical injector kit fits most pump which is an OEM brand. Replaces pump 203640GS 308452002, 190593GS and 190635GS..
  • Soap injector makes cleaning so much easier and faster. It’s a great replacement for the old rusted one..
  • The brass fitting is a 1/8 inch 27 male BSP thread. Install them and the soap dispenser works just like new..
  • How to install: Take the brass fitting, drop in the little ball, insert spring with small end against the ball, then attach it back on the pump. Do not over-tighten otherwise it will snap off..
  • Kit includes 2 pieces fittings, 2 pieces small balls, 2 pieces springs, 2 pieces o-rings outside and 4 pieces inside..
Check Stock

Well water pump 12 V / 24 V DC solar water pump with solar cell alternative energy 70 m

  • Design: 3-Chamber Positive Displacement Diaphragm Pump.
  • Inlet Screen: 50 Micron Stainless Steel Inlet Screen.
  • Dimensions L x W x H (in.): 4.09" x 4.09"....
  • Material: High Strength Engineered Plastic.
  • Quick disconnect with "Watertight-Gland" Design Pat Pend.
  • Internal Bypass: 105-110 PSI Max. (7.2-7.5 BARS).
  • Outlet Port: 1/2" (12.7mm) Barbed Fitting.
Check Stock

Hydrofarm RS5GALSYS Root Spa Deep Water Culture Bucket System, 5 Gallon, black

  • 8" bucket basket to hold your choice of growing medium.
  • Multi-purpose air hose delivers air from the pump to the bottom of the bucket.
  • Air pump to oxygenate your water to encourage root growth.
  • Includes ½" grommet fitting, ½" elbow fitting, ¼" black tubing, Clay pebble media sold separately.
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • ...age: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • ... Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
  • Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
  • Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt Pulley (# 149-1594) > Pulley comes Pre-Pressed Power Steering Pump > 5 3/4" Steel Pulley > V-Belt Style Pulley | Southwest Speed 1976-1986 Jeep CJ High Strength Speed Pitman Arm (# 107-1827) > Restores proper steering performance to help ensure vehicle control > OE Type Replacement part > Crafted from the strongest materials available | Southwest Speed 1976-1986 Jeep CJ Telescoping Steel Power Steering Shaft (# 150-2861).
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....
Check Stock