Top Push Up Antenna Masts

ZLLY Mount MOUNTING Pole MAST for Antenna Satellite J-Mount Dish Outdoor White Color

  • Ideal for flat-roof mounting a TV Antenna or Dish.
  • Safe & secure installation on flat roof surfaces.
  • Heavy-duty steel construction | Base consists of (6) lengths which can be assembled from 35.5" x 35.5" up to 36" x 36" square | Works with standard grade 2 bolts.
  • Requires concrete block ballast for installation (not included).
  • Requires mast for installation (not included).
  • see our selection of masts: SKY32817A, -B, -C1 or -D.
Check Stock

Heavy-Duty Tripod Base with 1.66 Inch Mast 3 Feet

  • Permanently mount an antenna or satellite dish on the roof with Skywalker’s Heavy Duty 3ft Tripod Base. The mast AND installation hardware is....
  • An advantage of Tripod mounts is that you can mount them almost anywhere. From the peak of a rooftop to a flat platform, this tripod can handle it.....
  • The Tripod is surprisingly heavy duty without being overly weighty which, conveniently, makes it easy to carry up a ladder. It folds out into the....
  • Tripod comes with its own 1.66" x 28” mast to get you started. It is secured in place via the bolts and nuts attached to the Tripod at the mast base....
  • The Skywalker Signature Series Heavy Duty 3ft Tripod Base can support masts up to 2" OD..
Check Stock

RaTLSnake M6 v2 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and Other Software Defined Radios. Magnetic Whip Antenna Set Made with Low-Loss RG58 Cable for Radios with 50 Ohm SMA Connectors

  • Heavy-duty, wide-band premium antenna bundle for RTL-SDR and other SMA radios. Long 2m (6') cable made with low-loss RG-58.
  • Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Specially designed for wideband software defined radios.
  • Male SMA connector on antenna cable for easy connectivity to all 50Ω SMA-input radios like our NESDR SMArt series and HackRF One.
  • Redesigned for 50Ω to maximize compatibility with commonly used radios and to reduce SWR mismatches. The base has been redesigned to improve ground plane coupling and shielding over v1..
  • Antenna base is constructed from heavy-gauge metal for resilience and longevity. Includes full 1 year warranty direct from Nooelec!.
Check Stock

Nooelec NESDR Smart v4 Bundle - Premium RTL-SDR w/Aluminum Enclosure, 0.5PPM TCXO, SMA Input & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio.

  • Premium RTL-SDR bundle includes newly designed NESDR SMArt in beautiful brushed aluminum enclosure, re-designed antenna base with 2m (6.5') RG-58 feed cable, and 3 antenna masts. Proudly built by Nooelec in the USA and Canada! Full 2-year product warranty.
  • A wide variety of improvements on other designs, including ultra-low phase noise 0.5PPM TCXO, RF-suitable voltage regulator, custom heatsink, 2 silicone pads and SMA female connector.
  • Designed from the ground up to reduce USB port occlusion. Run multiple NESDR SMArt side-by-side with any USB-compliant device, including tightly-spaced embedded devices like the Raspberry Pi.
  • SDR frequency capability approximately 25MHz-1700MHz. Frequency range can be extended down to 100kHz or lower with the Ham It Up, available on Amazon (Product ID B009LQT3G6).
  • An 8pc SMA adapter set and carrying case is also available on Amazon (Product ID B073JT98RR).
Check Stock

NESDR SMArTee v2 Bundle - Premium RTL-SDR w/Integrated Bias Tee, Aluminum Enclosure, 0.5PPM TCXO, SMA Input, Antenna Base & 3 Antennas. RTL2832U & R820T2-Based Software Defined Radio (SDR)

  • An ultra-low noise software defined radio, capable of receiving nearly ANY RF signal from approximately 25MHz-1700MHz. Includes SDR, high-quality antenna base, and 3 antenna masts to get you started right away without any further purchases!.
  • Unmatched price & performance–redesigned PCB reduces noise by an average of a full 3dB! Includes all the same fantastic features as the rest of the NESDR SMArt series, including an ultra-low phase noise TCXO, with a guaranteed .
  • Same form factor as the other devices in our NESDR SMArt series, which means no USB occlusion issues–run devices side-by-side without messy extension cables or adapters, even on embedded devices like the Raspberry Pi!.
  • Always-on, 4.5V bias-tee with independent ultra-low-noise power supply and 250mA power capability allows you to power nearly any active antenna circuitry without messing around with drivers or software.
  • Designed and manufactured by Nooelec in North America. Impeccable quality and full 2-year warranty!.
Check Stock

ACEIRMC FM Dipole Antenna Indoor 75 Ohm + 300-ohm to 75-ohm Transformer Push-On F Type Balun Kit for Ham Radio Yamaha JVC Sony Bose Natural Sound Stereo Receiver

  • F connection Antenna FM 75 UNBAL Dipole Indoor T Antenna HD Aerial Male Type F Connector 75 Ohm Y Tuner Enhances FM Stereo Reception.
  • Stretch the end of the antenna as far as possible away from the device for the best reception..
  • Applicable for Yamaha, JVC, Sherwood, Pioneer, Panasonic, Onkyo, Sony audio system, tabletop stereo, radio and so on.
  • FM Dipole Antenna Indoor 75 Ohm + 300-ohm to 75-ohm Transformer(Push-On F Type Balun) Kit for Ham Radio Yamaha JVC Sony Bose Natural Sound Stereo....
  • 1PS FM Radio Antenna + 1PS Push-On F Type Balun KIT.
Check Stock

Ancable 1 Pair Stainless Steel Antenna Chimney Y-Mount with 12ft Straps and Installation Hardware for Mounting TV Antenna Mast to Chimney

  • Durable: This chimney mount is made of 1-1/4" wide x 12 gauge galvanized steel sheet, which is heavy-duty corrosion resistant and can be used for a....
  • Special Design: This chimney mount is used to mount 1" – 1.25" outer diameter antenna masts to your chimney with 4" clearance..
  • Installation: Place the bracket on the chimney and wind the round chimney with the enclosed steel. Be careful not to twist it. When installing the....
  • Good Accessories: After the installation is completed, it is very firm, and the safety connection will not be affected by wind or rain. These make it....
  • What You Get: 2 Y-type brackets, 2 12ft stainless steel straps and installation hardware with worry-free 12 months of warranty and lifetime friendly....
Check Stock

Super Antenna MR1710 SuperWire Radial Set for HF Vertical Antennas 17m 15m 12m 11m 10m Bands ham Radio MP1 Ground Plane

  • THIS IS: The model MR1710 SuperWire Radial Set by Super Antenna. It is for all Super Antenna MP1 portable HF antenna systems. Made by Super Antenna, designed as part of the /backpack /base /travel /mobile /portable antenna system for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to 17 meters (18MHz), 15 meters (21MHz), 12 meters (24MHz), 10 meters (28MHz-29MHz). FREQUENCY RANGE: Covers 16.5 MHz to 30 MHz continuous. Also covers WARC bands, CAP, MARS, Marine, CB (26MHz-27MHz), and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 6″x4″ (15x10cm) compact roll for portability. Extends and fans out to 4 full size quarter-wave wires (1 wire for 17m band, 1 wire for 15m band, 1 wire for 12m/11m band, 1 wire for 10m band). Max wire length: 1....
Check Stock

Super Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane

  • THIS IS: The model MR8075 SuperWire Radial Set by Super Antenna. It is designed for use with the MC80 SuperCoil on all Super Antenna MP1 series portable HF antenna systems. Made by Super Antenna for /backpack /base /travel /mobile /portable antenna systems for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to the 80 meter or 75 meter (3.5 to 4 MHz) ham band. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on c....
Check Stock

TV Antenna - Antop HD Antenna SBS-301 Indoor TV Antenna for TV and FM Reception - 70 Miles Range with TV Signal Booster Amplifier and 4G LTE Filter Digital Antenna

  • 【Super Slimmer Design】- With a 17-inch wide side-by-side design, it is twice the size of typical flat indoor hdtv antennas,that's white on one....
  • 【TV Signal Booster Amplifie】- It adjusts the antenna’s power with a simple turn of a dial and connects to a secondary device simultaneously,it....
  • 【No Contract,No Bills】- Watch free TV for life on multiple devices, no monthly bill for watching TV, the smart antenna HDTV and FM paper-thin....
  • 【FM Antenna & Radio Antenna】- Connect it to a radio or tuner to enjoy local AM and FM radio broadcasts. The hd antenna for tv indoor features a....
  • 【Easy To Set Up】- The included stand allows you to position the on a table or no a wall.Push pins and application stickers also included for....
Check Stock

Xislet Antenna Ornament Rubber Adapter Base Compatible with 2007-2013 Toyota Tundra Accessory Manual Radio Antenna Mounted Base Bezel Replaces 86392-0C040

  • Material: Thermoplastic Rubber(NOT ABS PLASTIC), Functional: Tundra antenna adapter base to help the antenna in securely and snug.
  • Easy to install: Simply remove the old antenna ornament base, push ornament in the antenna by using grease(come with the package), screw it back on.
  • Soft Malleable: The antenna ornament made of high-quality thermoplastic rubber compound, resistant to breaks, faded, dry-rotted, heat.
  • Directly antenna ornament replacement for tundra replace part number: 748579529453, 863920C040, 86392-0C040, AM-2419253465, TYZAN00009.
  • Please Note! Package includes: Only 1 antenna ornament + 1 tube of grease (NOT Includes Antenna).
Check Stock

Antenna Ornament for 2007-2014 Toyota Tundra - Toyota Genuine Accessory 86392-0C040 Manual Radio Antenna Mounted Base Bezel

  • COMPATIBILITY OF ANTENNA ADAPTER BASE: Check First! As our Product May Fit One or more Vehicles, Please Refer to the Amazon Parts Finder Tool to see if this Antenna Base does fit your vehicle..
  • PERFECT ANTENNA ORNAMENT REPLACEMENT: Each Antenna Ornament Replacement Measures 3.8” x 2.1” x 0.5” and is Intended to be compatible with 2007-2012 OEM Toyota Tundra..
  • FINE CRAFTSMANSHIP: The Tundra Vehicle Antenna Ornament is Meticulously Crafted Using Premium Quality Material For Required Durability and Long-Lasting Use. It Will Last Just as long as an original part..
  • REPLICATES THE ORIGINAL PART: The Tundra Vehicle Antenna Ornament Is The Perfect Replacement for the Original Part (86392-0C040 Antenna Ornament). It Mimics the original look and design..
  • EASY & QUICK INSTALLATION: This Vehicle Antenna Ornament Can Be Easily Installed Within Minutes. No Complicated Tools or Hacks needed. Simply Remove The Old Original One And Push Ornament In The Antenna..
Check Stock