Top Push in Fitting

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock

Lemoy 1/4 OD Quick Connect Push In to Connect Water Tube Fitting for RO Reverse Osmosis Water Filter Fittings Pack of 30

  • Easy to use,Mini quick connect push tee 1/4-Inch OD.
  • Push fit fittings,Quick Connect Fitting 1/4" RO Water System.
  • Standard fitting for water filter systems using 6mm water filter tubing.
Check Stock

Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack

  • This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track..
  • RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity..
  • The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
  • Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough ....
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • ...uel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartment to make....
Check Stock

Dixon Valve & Coupling 270AT Tool for Push-On Fitting, 13-1/2\ Length x 2-3/8\ Width x 7\ Height

  • Cuts push-on style hose and inserts the fitting.
  • Built-in cutter slices through 1/4" - 3/4" ID reinforced push-on hose without fraying.
  • Clamp hose into tool's vice and apply light pressure on handle to drive in the fitting.
  • Tool has four 7/16" diameter mounting holes for bench mounting.
  • Measures 13-1/2" length by 2-3/8" width by 7" height.
Check Stock

Sharkbite Disconnect Tongs all three U711, U713 & U715

  • Sharkbite Disconnect Tongs all three U711, U713 & U715.
  • Allows for easy removal of Universal brass push-to-connect fitting from pipe.
  • Used to remove a tube from a SharkBite push-fit fitting.
  • Easy to use and very fast to Disconnect with this tool.
Check Stock

Liimevvon 1/4\ OD Quick Connect Push In to Connect for RO Water Reverse Osmosis System Water Tube Fitting Set Of 20 (ball valve+T+I+L Type Combo)

  • Push fit fittings,Quick Connect Fitting 1/4" RO Water System.
  • Standard fitting for water filter systems using 6mm water filter tubing.
  • Easy to use,Mini quick connect push tee 1/4-Inch OD.
  • Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.
Check Stock

Dixon Valve BPN23 Brass Push-On Hose Fitting, 3/8\ NPTF Male (Dryseal) x 1/4\ Hose ID Barbed

  • Push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 3/8-inches NPTF male and 1/4-inches hose ID barbed.
Check Stock

Dixon Valve BPN252 Brass Push-On Hose Fitting, 1/4\ NPTF Male (Dryseal) x 5/16\ Hose ID Barbed

  • Push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 1/4-inches NPTF male and 5/16-inches hose ID barbed.
Check Stock

YZM 10 pcs 1/4" Quick Connect Push In to Connect Water Purifiers Tube Fittings for RO Water Reverse Osmosis System+10 meters（32 feet） tubing hose pipe . (blue tubing 10 meters)

  • Easy to use,Mini quick connect push tee 1/4-Inch OD.
  • Push fit fittings,Quick Connect Fitting 1/4″ RO Water System.
  • Standard fitting for water filter systems using 6mm water filter tubing.
Check Stock

Dixon Valve BPN42 Brass Push-On Hose Fitting, 1/4\ Male NPTF x 1/2\ Push-On Hose ID Barbed

  • Dixon push-on fitting are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fitting will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • 1/4-inches male NPTF and 1/2-inches hose ID barbed.
Check Stock