Top Push in Fittings

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

TL TOOLEGIN DOT Brass Push to Connect Fittings 1/4" Air Brake Union Air Line Fittings Push in Fittings Brass Union Air Brake Repair Kit Contains Tube Push-in Tee Union Coupling Male NPT 90° Elbow

  • Unique Air Line Tubing Kit: The air brake fittings contains 2pcs 1/4” Unions, 2pcs 1/4’’ Tees, 2pcs 1/4” DOT Push-In × 1/4” MNPT, 2pcs 1/4” DOT Push-In × 1/8” MNPT 90° Elbow, 2pcs 1/4” DOT Push-In × 1/4” MNPT 90° Elbow..
  • High-quality Material: Our push in fittings are made of high quality brass CA360 CA377 , with corrosion resistance, high temperature ductility and low permeability..
  • Technical Parameter: The Working Pressure is from Vacuum to 250 psi, the Working Temperature is from -40° F to +200° F..
  • Easy to install: All fittings can be sealed by pushing the tube firmly into the fittings, and they are also simple to be removed from the tube..
  • Wildly Usage: The air brake union assortment kit can be used with air systems, copper tubing in air brake systems, which is perfect for garages, workshops and so on..
Check Stock

iCrimp Push-to-Connect,Push-fit Disconnect Clamp Tool for Brass-Push Fittings Removing,Multi-size Combination 1/2",3/4",1"-CRQ02

  • 「VERSATILE TOOL」With one tool allows 1/2”,3/4”,1” Push-to-Connect to be disconnected from the copper, CPVC, or PEX pipe, no extra interchangeable faceplates required..
  • 「REMOVES IN SECONDS」Simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly..
  • 「DURABILITY」Constructed of high-quality carbon steel with corrosion resistance ensures reliable functionality and long service life..
  • 「ERGONOMIC DESIGN」TPR coated grips prevent slippage in wet conditions and one-handed operation design to allow your free hand the ability to assist in the removal of fittings..
  • 「VERSATILITY」It's compatible with brand Push-fit/Push-to-Connect fittings..
Check Stock

3/8 Air Fittings Push to Connect Fittings,CEKER 3/8 Inch Tubing Od x 3/8\ NPT Thread Male Pneumatic Fittings Air Line Fittings Quick Connect Push in Connectors 5Packs

  • Type:3/8" Od x 3/8" NPT Male Push to Connect Fittings.
  • 3/8 inch Tube Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 3/8 Quick Connect Fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 3/8" od tube Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32～140°F.
  • Push to connect air fittings 3/8 is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

DGZZI 1Set 20-Pack Reverse Osmosis Aquarium Quick Fittings With Locking Clips 1/4 OD RO Water Filter Hose Tube Plastic Connectors

  • Package includes 5 types of quick fittings to meet your need..
  • Push fit fittings, Quick Connect Fitting 1/4" RO Water System..
  • Standard fitting for water filter systems using 6mm water filter tubing..
Check Stock

SharkBite U714A Disconnect Clip, Push-to-Connect Fittings, SharkBite Fitting Removal Tool, 1 Inch

  • REMOVES IN SECONDS: 1 Inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustmentsREMOVES IN SECONDS: 1/4 inch disconnect clip removes push to connect fittings requiring no special tools, no soldering, no crimping or glue. Just use the disconnect clip to make any adjustments.
  • COPPER, PEX, CPVC: SharkBite disconnect clip removes plumbing fittings that fit copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
  • QUALITY: Only SharkBite’s quality and performance is field-proven and is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing and silicone wrap meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

CEKER 1/4 Tube Fitting Push Connect Pneumatic Fitting,PC 1/2\ Tube Od x 1/4\ NPT Thread Male Straight Union Air Fittings Push in Fitting Quick Release Pneumatic Connectors 2Pack

  • Type:1/2" Od x 1/4" NPT Male Push to Connect Fittings.
  • 1/4 inch Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi.
  • 1/2" od tubing Pneumatic Fittings Applicable: Pipe PU/ PA/ PE/ PVC.
  • Working Temperature: 0-60°C | 32～140°F.
  • 1/4 Push to connect air fittings is made of Nickel Plated Brass and quality plastic- corrosion resistance, ductility.
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

  • Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
  • Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
  • Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock