Top Pva Absorbs Cotton

It's Hot Outside (Original Mix)

  • INSTANT COOLING RELIEF Run under water for one minute or until saturated, wring out excess water for drip free cooling.
  • LONG LASTING  Can last for up to 4 hours on a single soak. Simply re-wet to increase cooling duration.
  • HOW DOES IT WORK? Cooling PVA material absorbs water and creates a cooling sensation as it evaporates.
  • REUSABLE & MACHINE WASHABLE Air dry until material is stiff, re-wet until soft. Machine washable with mild detergent and air dry.
  • HEAT STRESS PREVENTION Reduces the effects of heat exhaustion and fights fatigue while working or playing in the heat. Can also be used to help bring down fevers, hot flashes or night sweats.
Check Stock

Eyliden Sponge Mop, Self-Squeeze Dry & Wet Sponge Mops for Floor Cleaning,Suitable for Mini Scenes Such as Apartment, Room, Bathroom and kitchenModel F-52 with 2 Sponge Head

  • ...corners and the characteristics of light weight, makes you clean easy,and easy storage.When you finished cleaning, just wash the head with clean water directly without hand washing..
  • Excellent Sponge Mop for Floor Cleaning：The sponge is made of PVA material that strongly absorbs water, and whenever it never becomes harden, PVA material has a strong adsorption ability for fine dust and small particles..
  • Wet & Dry, Hand Free Washing:No need to use other tools , the mop is equipped with a wringer, you can easily squeeze out the dirty water and help you quickly dry the mop head and then avoid leaving watermarks. Always keep your hand clean while mopping..
  • Multi-Application Place:Eyliden sponge mop Suitable for Homes, Bathrooms, Kitchens, Apartments, Dorms, Schools, Offices dormitories and RVs.And the mop head can rotate 180 degrees to facilitate cleaning the bed, sofa bottom and narrow area..
  • Standing Storage:The floor mop is standing storage which reduces the space occupation and accelerates sponge head to dry. There is a hanging hole at the top of the handle, and it can be hung....
Check Stock

alfyng 6 PCS Cooling Hard Hat Sweatband - Reusable Snap on Sweat Band Liner, Quick Dry & Moisture Wicking Replacement Hard Safety Hat Accessories Fit Most Safety Helmets

  • Quickly cooling efficacy: The hard hat sweatband are manufactured with PVA special cold feeling technology. Unlike ordinary absorbent hat sweatband, It absorbs sweat and cools down quickly and keep cool as long as it contains water..
  • About the material: Made from PVA cold materials that have a lot more air layers than ordinary sweatband, which can quickly circulate the outside air so that makes the water evaporate faster. After absorbing sweat faster, the skin surface will feel cool and cold for a long time..
  • Intimate design: With the self-adhesive cloth made it more skin-friendly and not easy to move while keeping cool at all times. The hardhat sweatbands is soft and comfortable to touch, reusable, washable and it has strong sweat absorption, lets your comfortable at work..
  • Please note: It is normal phenomenon for moisture to appear in the bag in order to maintain softness. The product is packaged in a semi-wet condition；To prevent tearing, open after soaking in water when hardening, dry in a cool place, avoid direct sunlight. （You can completely dried it to harden when not in use long time）.
Check Stock

PVA Filament, Water Soluble Support 3D Printer Filament 1.75mm 0.5KG Spool for 3D Printers, Natural

  • 【Attention Please】This filament is optimized PVA, which avoids the problems of easy breakage, severe moisture, and difficult storage caused by PVA being too soluble in water. Therefore, this PVA filament is insoluble in water at room temperature, but it will soften at a water temperature of 55-60°C to achieve the purpose of easily removing the support. If you want PVA filament that is completely soluble in water, please do not buy this product. If your main purpose is to remove the support more easily and you don't care whether the PVA completely melts in the water, then this PVA is a better choice..
  • 【Water Soluble PVA】Water-soluble Polymer. Not completely dissolved, but softening and layering,then peel off with your hands. It will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!.
  • 【HIGH PERFORMANCE】 With even tight winding, clog-free and bubble-free, always maintain a smooth feeding during printing, effectively reduce unexpected printing interruptions. Enjoy design and bring to life your inventions..
Check Stock

The Super® Standard 11' Double Roller PVA Sponge Mop Set (Mop and 1 Extra Refill)

  • The Super Standard 11" Double Roller PVA Sponge Mop Set.
  • Includes PVA Mop, Extra PVA Mop Refill, and Telescopic Handle.
  • 100% Pure PVA Sponge in Patented Non-Slip Gripper.
  • Robust Handle - Used Commercially by Janitors, Veterinarians, and Restaurants.
  • Picks Up Pet Hair, Dust, and Liquid Like a Magnet - Doesn't Drip!.
Check Stock

3D Printlife E PVA: Enhanced PVA, 1.75mm Natural, Water Soluble Support 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm (500g)

  • Enhanced PVA formulation with improved stability for 3D printing.
  • Bonds well with PLA, ABS, and PETG with excellent water solubility, even in cold water.
  • Much greater thermal stability than standard PVA.
  • Perfect support for prints with large overhangs or complex internal geometries.
  • Do not exceed a printing temperature of 225˚C or E PVA will crystallize too quickly and will no longer flow and/or dissolve in water..
  • Store in a resealable bag with desiccant between 0°C and 30°C, away from UV light, and we recommend the relative humidity stay below 50%..
  • Difficulty: Advanced. Please note that all PVA's are very sensitive to moisture and humidity. E PVA comes vacuum sealed but we strongly recommend using a filament dryer before removing from storage after initial use..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

Furinator Pet Towel | Dog Towel | Super Absorbent PVA Bath Chamois | Great for Dogs and Cats | Eco-Friendly and Easy-to-Clean | Fastest Way to Dry Your pet

  • ❤ GUARANTEED TO BE THE MOST ABSORBENT PET TOWEL YOU’VE EVER USED.
  • ❤ SUPER ABSORBENT – can hold up to 10 times it’s weight. Furinator Pet towel is the fastest way to dry your furry family member.
  • ❤ FRESH – synthetic PVA material reduces the chance for bacterial growth for a cleaner and healthier alternative to cotton and microfiber towels.
  • ❤ EASY TO CLEAN – smooth surface minimizes nooks and crannies for hair and debris to be trapped. Washes easy with soap and water.
  • ❤ ECO-FRIENDLY – made from biodegradable PVA that won’t harm the environment and is safe to use on pets and humans.
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock