Top Pva Material

PARTALL Film #10 Polyvinyl Alcohol (PVA) Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) mold release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against mold hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over mold release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PARTALL Film #10 Polyvinyl Alcohol (PVA) Half Gallon

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against surface hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

PVA - PARTALL ® Film #10 Polyvinyl Alcohol (PVA) Half Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and surfaces that are still curing (green or recently reconditioned surfaces can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble.
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure).
Check Stock

Eyliden Sponge Mop Designed for Small Spaces, Self-Squeeze Dry & Wet Sponge Mops for Floor Cleaning,Easy Storage Lightweight Mini Size, Fit Apartments, Dormitories, RVs Floor Cleaning Tools

  • ... rooms. No need to use other tools such as a bucket, the mop is equipped with a wringer (Washing and dewatering in one), protects your hands without getting your hands wet. Suitable for all kinds of wooden floors, marble floors, kitchens, living rooms and bathrooms..
  • Floor Protection Sponge:The sponge is made of PVA material, which is very wear-resistant, breathable acid-resistant, and can clean wooden floors without damaging them. PVA material has a strong adsorption ability for fine dust and small particles. wooden floors without damaging them. PVA material has a strong adsorption ability for fine dust and small particles..
  • Adjustable Handle:The length of the product can be freely adjusted between 16.5” and 30.7”. This product can be disassembled and used according to height. You can use the mop head (with sponge mop) directly to clean the low area and connect the mop head and mop pole to clean the high area..
  • Standing Storage:The floor mop is standing storage which reduces the space occupation and accelerates sponge head to dry. There is a hanging hole at the top of the handle, and it can be hung up after use..
Check Stock

PVA Professional Double Roller Ultra Foam Rubber Mop Head Replacement (3x)

  • Polyvinyl alcohol (PVA) sponge mop head is highly absorbent and durable.
  • Horizontal grooves are specially designed to lift dirt off floors, windows and other surfaces.
  • The Super, Magical, Sweep 'N Mop, Quickee, and Wilen 11" PVA mops..
  • PVA UNIVERSAL HEAD For use on any standard 11" sponge mop handle. Note May not fit CLOROX MOP.
  • Includes Set of 3 sponge mop head - Handle AND mounting screws not included.
Check Stock

Champion Chamois Shammy Towel for Car Boat or Home - 26 x 17 - Ultimate Drying Chamois 1 Chamois Natural

  • SUPER ABSORPTION - The Champion Chamois car cloth completely dries surfaces without leaving swirl or lint marks. It quickly absorbs and retains large....
  • MULTI-PURPOSE CAR TOWEL - Our shammy cloths aren't just limited to cars, boats and trucks. They're perfect for your home or office too. Whether....
  • ULTIMATE CAR WASH TOWEL - These car shams from Champion Chamois have wide pores that absorb huge amounts, but don't trap particles like a traditional....
  • HIGH QUALITY CLEANING CLOTH - Made from premium synthetic PVA material, our drying towels for cars, trucks and RVs are soft but tough. They ring....
  • VEGAN ALTERNATIVE - Our shammies are made with a synthetic PVA material, not hide based animal leather. You can trust that our products are animal....
Check Stock

Ergodyne Chill-Its 6602 Evaporative Cooling Towel, Blue

  • LONG LASTING INSTANT COOLING RELIEF Can last for up to 4 hours on a single soak. Simply re-wet to increase cooling duration.
  • EASY TO USE AND ACTIVATE Run under water for about a minute, twirl in the air, and it’s cool! Drape around your neck, shoulders and head for drip-free cooling relief as temperatures rise.
  • ADVANCED COOLING TECHNOLOGY Made with absorbant and hyper-evaporative PVA material that holds more water and creates a long lasting cooling effect making it the most effective cooling towel on the market. LARGE SIZE: 13in x 29.5in.
  • DURABLE AND REUSABLE Product can be re-used over and over again. Let air dry (material will get stiff), re-wet until soft and it’s ready to use!.
  • WIDE VARIETY OF USES Reduces the effect of heat exhaustion and fights fatigue while while working or playing in the outdoor summer heat. Can also be used to help bring down fevers, hot flashes or night sweats.
  • MACHINE WASHABLE Treated with antimicrobial to prevent mold. Wash in cold water with mild detergent and air dry.
Check Stock

SainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm

  • Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
  • Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
  • Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
  • Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
  • Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
  • Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock

KODAK PLA PLUS Filament 1.75mm for 3D Printer, Black PLA PLUS, Dimensional Accuracy +/- 0.02mm, 750g Spool (1.7lbs), 1.75 PLA Filament used as 3D Printing Filament to refill most FDM Printers

  • EXTRA-DRY: vacuum resealable bag with silica gel to protect filament from humidity and dust..
  • SUPPORT MATERIAL: Support filament for PLA 3D printing filament..
  • PREMIUM: PVA 3D printing filament engineered for reliable and easy 3D printing..
  • COMPATIBLE: 3D PVA fits most open material 3D printers..
  • ONLINE SUPPORT: We're here to help! Contact us or visit our support center. Satisfaction guaranteed!.
Check Stock

Tekbond Wood Glue, PVA Wood Glue for Furniture and Woodworking, 8oz (Pack of 1)

  • MULTI-PURPOSE: Tekbond PVA Wood glue is ideal for gluing and repairing furniture, fittings, putters, wood assembly and cold rolling applications.
  • STRONG ADHESION: This PVA yellow wood glue provides strong adhesion between wood and materials such as concrete, fabric, leather, textiles, wood cardboard and felt.
  • MOISTURE RESISTANT: Designed with a moisture resistant composition that makes it suitable for both indoor and outdoor woodworking projects.
  • FAST DRYING: Dries rapidly to support a quick completion of all woodworking projects.
  • PACKAGE CONTAINS: Each pack contains 1 container of PVA Wood glue, 8oz (Pack of 1).
Check Stock

Tekbond Wood Glue, PVA Wood Glue for Furniture and Woodworking, 16oz (Pack of 1)

  • MULTI-PURPOSE: Tekbond PVA Wood glue is ideal for gluing and repairing furniture, fittings, putters, wood assembly and cold rolling applications.
  • STRONG ADHESION: This PVA yellow wood glue provides strong adhesion between wood and materials such as concrete, fabric, leather, textiles, wood cardboard and felt.
  • MOISTURE RESISTANT: Designed with a moisture resistant composition that makes it suitable for both indoor and outdoor woodworking projects.
  • FAST DRYING: Dries rapidly to support a quick completion of all woodworking projects.
  • PACKAGE CONTAINS: Each pack contains 1 container of PVA Wood glue, 16oz (Pack of 1).
Check Stock