Top Pvc Bending Machine

SENDAY Placemats, Set of 8 Heat-Resistant Placemats Stain Resistant Anti-Skid Placemats for Kitchen Table, Washable Durable PVC Table Mats Woven Vinyl Placemats

  • ✅NEW DESIGN–Corner sealing technology eliminate rough selvedge, more durable, thicker than the average. Placemats woven with high quality eco-friendly 70% PVC and 30% polyester..
  • ✅EASY CARE–Washable table placemat, non-fading, non-stain. If there is stains stuck in the placemat, use a brush and soap water to clean and wipe dry. No machine wash..
  • ✅HIGH QUALITY–Environmentally PVC materials used, very durable placemats, free bending, free cutting, pull force non-deformation. Effective heat resistance of approximately 212°F(100℃)..
  • ✅HOME DECORATION–Fashionable placemat would be a perfect decoration and life quality of your home, dining hall, kitchen, hotel and business office. Top-grade exquisite placemats would be the best decoration and protection to your tables..
  • ✅PACKAGE–Your satisfaction are our primary priority. Include 8 pcs of placemats, each measures: 18"X12" (45cmX35cm). All placemats are cut by machine with no rough selvedge..
Check Stock

YEIO Placemats, Set of 6 Heat-Resistant Stain Resistant Non-Slip Placemats for Kitchen Table, Washable Durable PVC Table Mats Woven Vinyl Placemats (6PCS, Green)

  • ✔【NEW DESIGN】–Corner sealing technology eliminate rough selvedge, more durable, thicker than the average. Placemats woven with high quality eco-friendly PVC materials..
  • ✔【EASY CARE】–Washable table placemat, non-fading, non-stain, not mildew. If there is stains stuck in the placemat, use a brush and soap water to clean and wipe dry. No machine wash..
  • ✔【HIGH QUALITY】–Environmentally PVC materials used, very durable placemats, free bending, free cutting, pull force non-deformation. Effective heat resistance of approximately 212°F(100℃).
  • ✔【HOME DECORATION】–Fashionable placemat would be a perfect decoration and life quality of your home, dining hall, kitchen, hotel and business office. Top-grade exquisite placemats would be the best decoration and protection to your tables..
  • ✔【PACKAGE】–Your satisfaction are our primary priority. Include 6 pcs of placemats, each measures: 18"X12" (45cmX30cm). All placemats are cut by machine with no rough selvedge..
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

SHACOS Round Braided Placemats Set of 8 Round Table Mats for Dining Tables (Black Grey, 8)

  • NEW DESIGNCorner sealing technology eliminate rough selvedge, more durable, thicker than the average. Placemats woven with high quality eco-friendly 70% PVC and 30% polyester materials..
  • EASY CAREWashable table placemat, non-fading, non-stain, not mildew. If there is stains stuck in the placemat, use a brush and soap water to clean and wipe dry. No machine wash..
  • HIGH QUALITYEnvironmentally PVC materials used, very durable placemats, free bending, free cutting, pull force non-deformation. Effective heat resistance of approximately 212F(100)..
  • HOME DECORATIONLuxurious vinyl woven texture, precise cutting, no rough edges, giving your table a royal feel for daily use, parties, dinners, restaurants, and wedding receptions. Top-grade exquisite placemats would be the best decoration and protection to your tables..
  • PACKAGEYour satisfaction are our primary priority. Include 8 pcs of placemats, each measures: 18"X12" (45cmX35cm). Also easy for storageplacemats can be fold in any shape you want to fit in your cabinet or drawers..
Check Stock

Acrylic PVC Plastic Bender 110V Bending Machine Plastic Sheet Bender 23.62 Inch 60cm Manual Strips Heater for Plastic BendingTool 1mm-6mm Thickness for Sign Making

  • 【Work In Pair】If the thickness of acrylic material is beyond 0.24" (6 mm), you can choose to apply two plastic bending strip heater to heat both top and bottom of the material at the same time.
  • 【Safety Water Circulation Cooling】There is water circulation cooling on both sides of the plastic sheet bender heating tube to ensure that there will be no thermal deformation except where heating is needed.
  • 【Plastic Bender Applicable Materials】Acrylic, organic board, PVC and various thermoplastic materials.
  • 【Acrylic Bending Machine Application】Widely used in decoration engineering, sign making, display cabinets, aquarium wrapping, lighting LED channel letters, supermarket shelves, curtain walls, large light boxes, etc.
  • 【Service Guarantee】If there is any questions please feel free to contact with us,we will do our best solve it for you. Your satisfaction is our goal.
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its origi....
Check Stock

VEVOR SBG-40 Metal Scroll Bender High-Hardened Steel Scroll Bender Combination of Scroll Radius and Angle Bending Universal Metal Rod Bender For Steel Brass Cooper Aluminum

  • 5/8" Bending Capacity: The bender can easily and smoothly bend max thickness stocks the diameter of 5/8" tubes. And The metal bending tool is made of high-hardness steel.
  • it can be used for a long time. The heavy base improves stability during operation..
  • 3 in 1 Bender: Our bender has a multi-function of bending. It can achieve angle bending, radius bending and scroll bending. Thus, the machine can meet different usage needs, making your work more convenient..
  • Different Shape of Materials: The product is able to bend different metal materials such as steel, wrought iron, brass, copper, aluminum, etc. Max flat steel size: 1-3/16" x 5/16"(30 x 8 mm), max round steel size: 5/8" (15.8 mm) , max square steel size: 19/32" (15 mm)..
  • Energy-saving Structure: The metal bender adopts long handle with ergonomic design for effortless operation. At the same time, this iron bender machine has a wide support surface. It can be installed on a bracket or simply on the ground..
  • Universal Usage: A multifunctional steel bender machine produces grids, gates, balcony railing, patio furniture, iron lamps, power construction, road building, bridges pipeline laying or repairing, etc..
Check Stock

Cavnewt Hat brim bender,Hat rack,Hat shaper,Hat organizer for baseball cap,Hat pins for fitted hats,Fitted hats for men,Hat curving band,Hat bender brim,Hat curving tool,Fitted hat,Caps

  • 【Easy to use】Insert the hat into the hat bending tool and leave it for more than 24 hours, the curve of the brim can be perfectly displayed. Use the hat bending tool to stand for more than 24 hours before participating in activities or wearing a hat, and the curve after bending is perfect..
  • 【No environmental restrictions】The hat bending machine is easy to carry and can be used on the table, door hat rack, hat hook, and can also be used outdoors.
  • 【Sturdy and durable】The hat shaper uses high-quality abs, which is flexible in bending and will not be easily broken, caught by the door, and will not break.
  • 【Two options】The hat stylist has a large radius of 2.5 inches and a small radius of 2 inches. The edge bending machine has two bending radii to choose from, and the shape after bending is different..
  • 【Wide Applicable】The hat bending tool is suitable for all visor hats,suitable for sun hats,baseball caps,fishing hats,hunting hats,cowboy hats,sun hats,casual hats, Ashland Cap,Canvas Mesh-Back Cap,Pizza Hat,Trucker Mesh Cap.
Check Stock

DyAn Hot Air Gun Accessories, 4Pcs Heat Gun Air Nozzles Electric Kit Accessories Industrial Tools Shrink Wrap

  • [Hot Air Gun Kit]: Heat gun tools will satisfy all kinds of professional needs, such as stripping paint, soldering pipes, shrinking PVC, removing rusted bolts, softening caulk around the sink, or bending and molding plastics.
  • [Convenient to Use]: These heat gun nozzle tips are easy to install and efficient to use, this heat gun attachments is an ideal choice for you to replace the old or broken ones.
  • [Durable in Use]: The hot air gun accessories are made of stainless steel material, which provides durability and offers good corrosion resistance.
  • Heat gun accessories are suitable for welding, bending plastic pipes, and applying heat shrinkable pipes..
  • [Fine Workmanship]: These heat gun attachments are well made and well designed. Using these nozzle accessories together with a hot air gun to help make industrial manufacturing more convenient and faster.
  • [4Pcs Heat Gun Nozzle Kits]: This heat gun nozzle kit includes 4pcs different sizes heat gun nozzle in different shapes for your different used.
  • The hot air gun nozzle kit is suitable f....
Check Stock

Tronex Model 544 Flat Nose Pliers, Short Jaw, Jaw same height

  • Made of stainless steel and blue PVC grips.
  • Working surfaces are highly polished to prevent scratching precious metals.
Check Stock

Dinosaur

  • Covered with PU leather, water resistant and wear resistant. Nylon Strip on the side for easy carry. 55 PVC sleeves..
  • A card binder holds up to 440 cards. 4 pockets each side, cards can be stored on both front and back sides. Include 55 sleeves (card not included)..
  • 3 metal rings, easy to open to add and remove sleeves..
  • 3 sided smooth zipper, prevents card from slipping off..
  • Compatible with card size of 3.39*2.44 inches. It is recommended to store less than 440 cards to avoid bending to the cards due to bending caused by bulging of the binder..
Check Stock