Top Pvc Pipe Fittings S

1-1/4' 5-way Cross PVC Fitting Connector

  • DO NOT use these fittings for plumbing projects..
  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • 1-1/4" Fittings fit on 1-1/4" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 5-way Cross PVC Fitting Connector

  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

letsFix PVC Pipe 1/2

  • Professional PVC pipe and PVC fittings global suppliers..
  • Furniture-Grade pvc pipe – The “furniture grade” means that it has better performance than traditional plumbing pipes: ① The surface finish is higher and flawless. ②Processed from raw material particles with higher strength, the load bearing capacity and impact resistance are greatly enhanced. ③ Has better sound insulation performance. ④ There is no mark on the surface of the pipe, so that your project looks more professional. ⑤A wide range of applications, both indoor and outdoor..
  • Size Parameters – Length of each: 40″/ The total length of [10 Pack] is 33.33 Feet/ 1/2″ Schedule 40 PVC PIPE/ O.D.= 0.840″/ Wall= 0.109″/ I.D.= 0.602″..
  • Easy to Install – They usually complete the project with 3 way, 4 way, 5 way and various pvc pipe fittings. You can use them to create a pvc world and use your imagination, any project could be achieved..
  • After-sales Service – we have a mature after-sales service system to replace goods or refund unconditionally..
Check Stock

Everflow Supplies PCBL3460 60\ Long Pre-Cut Black Steel Pipe with 3/4\ Nominal Size Diameter

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

3/4 inch 3-Way PVC Pipe Fittings, PVC 3-way Fitting Connectors, Used for Building Furniture, Furniture Grade, White (12 Pack)

  • The 3/4-inch pipe fittings are made of high-quality PVC, with high plasticity, low temperature resistance, impact resistance and corrosion resistance. Furniture level, it has a higher manufacturing process than ordinary pipe fittings..
  • Furniture-grade PVC connectors are very suitable for DIY furniture, with smooth surfaces and tapered edges, you can use these PVC accessories to build any furniture you like..
  • Size: Fits 3/4 inch PVC pipe with an outer diameter of 1-1/16” or 1.050”.
  • Wide range of applications: These furniture-grade PVC pipe fittings are suitable for constructing swimming pool products, chairs, tables, shelves or garden supports, etc..
  • We sell the same series of DIY products, such as bottom brackets, tees, crosses, etc., which are convenient for you to make a series of DIY furniture. If you have any questions, You can contact us by email and we will help you at any time.
Check Stock

18Pack 3-Way Elbow PVC Fittings, 3/4Inch PVC Fittings, 3 Way PVC Elbow Side Outlet Tees, 90 Degree Elbow Corner Fittings for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • 3-Way Elbow PVC Fittings——The Elbow fittings are Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building sturdy cornet joint, such as dog beds and garden project.
  • 3/4Inch Elbow PVC Fittings——Package include 18pcs 3/4inch PVC connectors, fits externally over 3/4” size PVC pipe, which has actual OD 1-1/16” or 1.050” and an inside diameter of 3/4”(Sch.40 or Sch.80 PVC pipe.
  • Professional Performance 3-Way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——3-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

  • PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

24 PACK 3 Way PVC Elbow Fittings 3/4 Inch White, 3 way PVC Pipe Connectors, Pipe Fittings, Corner Fitting, for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • PVC MATERIAL - 3 Way PVC Elbow Fittings are made of high quality PVC material. With the feature of Low-Temperature-Resistant, Impact-Resistance, Ultraviolet-Resistance, Rust-Resistance.
  • IDEAL FOR CONNECTION- 3-way pipe fittings are ideal for center connections! Structural grade pvc has tapered edges and a beautiful glossy surface.
  • EAST TO INSTALL- The 3/4” pipe can be rotated and twisted into the 3 way pipe fitting during installation.
  • The deep sleeve allows the pipe to be inserted further into the joint in order to have a safer and more secure hold.
  • WIDE APPLICATION- Perfect for building greenhouse shed pipe fittings, tent connection, dog bed, hoop houses and so on.
  • GUARANTEE- Lifetime warranty for 100% money back or replacement, if you have any questions, please feel free to contact us.
Check Stock

10 Pack Elbow Pipes - Black Malleable Iron Brooklyn Pipe Fittings | 3/4\ Plumbing Threaded Pipe, 90 Degree Pipe Elbow - Decorative Iron Piping, Metal Cast Pipe Fittings For DIY Furniture Projects

  • Furniture Grade 4 Way PVC Fittings——The PVC elbow fittings are made from high quality PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building PVC furniture, such as dog beds and garden project.
  • 3/4” Elbow Fittings——Package include 18pcs 1/2inch PVC connectors, fits externally over 1/2” size PVC pipe.
  • Professional Performance 4 Way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

15Pack 3/4Inch 4 Way PVC Fittings, Heavy Duty PVC Elbow Side Outlet Tees, Furniture PVC Tee Corner Fittings for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • 4 Way PVC Fittings——The PVC Elbow are made Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building PVC furniture, such as dog beds and garden project.
  • 3/4Inch PVC Elbow Fittings——Package include 15pcs 3/4inch PVC connectors, fits externally over 3/4” size PVC pipe, which has actual OD 1-1/16” or 1.050” and an inside diameter of 3/4”(Sch.40 or Sch.80 PVC pipe.
  • Professional Performance 4-way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock