Top Pvc Profile Extrusion Machine

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs T-Slot Nuts, 40pcs M5x8 mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories

  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion.
  • T-Slot Aluminum Extrusion M5x10 mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life..
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry.
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x8 mm Hex Socket Cap Screw Bolt.
Check Stock

Polar Tangro 2020 Aluminum Profile Extrusion – T Type Black Aluminum Extrusion European Standard Anodized Linear Rail for DIY 3D Printer, CNC Routers, CNC Laser Cutters, Robotics Projects (400mm,4PCS)

  • DURABLE MATERIAL - European standard aluminum profile made of high-strength 6063-T5 material, adapting latest anodizing technology, making the surface smoother and cleaner, and the appearance is more beautiful. High-strength aluminum profiles have good corrosion resistance, wear resistance and oxidation resistance and can be processed, longer service life..
  • SPECIFICATION - 400mm T-type black 2020 extrusion European standard aluminum profile, packing with 4 pcs..
  • MULTI-COMPATIBILITY - Aluminum profile extrusion products are a good linear motion material with adjustable, compatible with all 20 series fasteners and accessories like M3, M4, M5 T nuts, and pulley wheel..
  • WIDELIY APPLICATION - 2020 T Type Extrusions are perfect for DIY 3D printers, CNC routers, CNC laser cutters, robotics projects, etc..
  • 100% SATISFIED - 30 days no reason to return. If you are not satisfied with your product for any reason, just contact us and we will replace the product or refund your order. Our team is always at your service..
Check Stock

ACQUA Misumi HFSB5-2020 Extrusion Frame Kit for VORON 2.4 3D Printer Black Anodized Blind Joints for VORON 2.4 VORON EXTRUSIONS, 350mm

  • Item type: Mechanical Kit/Hardware Parts.
  • Model number:For Misumi HFSB5-2020 extrusion.
  • Type of accessory: For Misumi Voron 2.4 blind joint.
  • Extrusion profile: For misumi HFSB5-2020.
Check Stock

Iverntech 4pcs 600mm 2020 V Type Black European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer and CNC Machine

  • 600mm V type black 2020 extrusion European standard aluminum profile.
  • Compatible with all 20 series accessories like M3, M4, M5 T nuts, and pulley wheel.
  • Aluminum alloy, black anti-oxidation surface treatment.
  • The length of each extrusion is 600mm, packing with 4pcs.
Check Stock

Thermaltake 7-bladed 92mm 4-Pins PWM Aluminum Extrusion CPU Cooling Fan for Intel Core i7/i5/i3 (Intel LGA 1200/1156/1155/1150/1151)CLP0556-B

  • Low-profile Gravity i2 has a perfect ratio aluminum extrusion heatsink.
  • Compatibility: Intel Core i7/i5/i3. Intel LGA 1200/1156/1155/1150/1151.
  • Connector: 4-Pins PWM. Compact Size Fan: 7-bladed 92mm fan provides better cooling performance with low noise.
Check Stock

KOOTANS 20-Pack 90 Degree Angle Brackets Interior Joint Corner Bracket for European Standard 2020 Series T Slot 6mm Aluminum Extrusion Profile with Screws and Wrench

  • Package include: 20pcs L joint and 40pcs screws and wrench.
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters,....
  • Fit European standard 2020 series Aluminum extrusion.
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
Check Stock

KOOTANS 100pcs 2020 Series M5 Sliding T Nuts Metric M5 Thread Slide in T-Nut for 20x20 Standard 6mm T-Slot Aluminum Extrusion Profile

  • TYPE: Sliding nut, suitable for Aluminum Extrusion Profile 2020 series T-Slot 6mm..
  • MATERIAL: High quality carbon steel,have high hardness, surface is Zinc-plated for good rust resistance..
  • SLIDER SIZE: Length 10mm, height 4.5mm, width 9mm.
  • Sliding nut can only be inserted into T slot from the end profile, it owns the most excellent connection strength and reliability. Very easy to be slide into T slot of aluminum profile..
  • 2020 Series Aluminum Profile Sliding T-Nuts widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects, etc..
Check Stock

Prolee 10 Pack 39.4 Inch 2020 T Slot Aluminum Extrusion 1000mm European Standard Anodized Linear Rail for 3D Printer and CNC DIY, Black

  • ✦ 10 Pack Per Package. Each Size 20mm*20mm*1000mm(39.4’’), Buy More Save More. Made Of Premium 6063-T5 Material With Smooth Edges, Makes It Rust-Proof And Durable.
  • ✦ High-Strength European Standard Aluminum Extrusion Profile, The Surface Is Anodized, Making The Surface Smoother And Cleaner.
  • ✦ Various Application: Use For Automation Equipment, Professional 3D Printers, Shelves, Lasers, Workbenches, Furniture, Precision Printers, Machinery, Fitness Equipment, Automatic Cutting Machines And More.
  • ✦ Well Packed: The Extrusions Were Wrapped With Plastic Cover And Protected With Foam, Each Extrusion Is Deburred And Cleaned.
  • ✦ 100% Satisfaction Guaranteed: Please Feel Free To Contact Us For Any Inquires Or Problems, Our Customer Service Team Will Reach Back To You Within 24 Hours.
Check Stock

KOOTANS 2pcs/lot Zinc Alloy Flexible Pivot Joint Connector for Aluminum Extrusion Profile 3030 Series Slot 8mm

  • Flexible Pivot Joint Connector, used to connect pieces of 30mm aluminum extrusion with any degree, free adjust, Then fixed.
  • Convenient to use, they can be simply fastened with bolts and nuts, (bolts and nuts are not included).
  • 3030 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock

Prolee 10 Pack 39.4 Inch 2020 T Slot Aluminum Extrusion 1000mm European Standard Anodized Linear Rail for 3D Printer and CNC DIY, Silver

  • ✦ 10 Pack Per Package. Each Size 20mm*20mm*1000mm(39.4’’), Buy More Save More. Made Of Premium 6063-T5 Material With Smooth Edges, Makes It Rust-Proof And Durable. We Guarantee No Scratches on Our Product, The Negative Comment Is Because He Bought A Second Hand Product.
  • ✦ High-Strength European Standard Aluminum Extrusion Profile, The Surface Is Anodized, Making The Surface Smoother And Cleaner.
  • ✦ Various Application: Use For Automation Equipment, Professional 3D Printers, Shelves, Lasers, Workbenches, Furniture, Precision Printers, Machinery, Fitness Equipment, Automatic Cutting Machines And More.
  • ✦ Well Packed: The Extrusions Were Wrapped With Plastic Cover And Protected With Foam, Each Extrusion Is Deburred And Cleaned.
  • ✦ 100% Satisfaction Guaranteed: Please Feel Free To Contact Us For Any Inquires Or Problems, Our Customer Service Team Will Reach Back To You Within 24 Hours .
Check Stock