Top Pwm Control

Stepper Motor Driver Controller Integrated Board Forward/Reverse Pulse Speed Angle Control Module PLC Serial Communication for NEMA 17 23 Motor

  • ★PWM DC Motor Speed Controller, Work Voltage: 9V-60V.
  • Control Frequency: 21KHZ, adopting current adjusting, PWM to control light and speed..
  • ★Linear regulate motor speed by potentionmeter, support forward / reverse rotation regulation..
  • ★Adopting advanced technology, high efficient, large torque, low heat etc. performance..
  • ★Can be widely used for DC brush motor speed controlling, light dimming in DC circuit, PWM can take full advantage of power energy..
Check Stock

WSDMAVIS 2Pcs PWM to Voltage Module 0% -100% PWM Converted to 0-10V Voltage Digital Analog Signal Converter for PLC Signal Interface Switching

  • The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals.Allowable error:5%..
  • It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM..
  • The modules are small in size and easy to use in different places.Easy to operate, fine tuned by potentiometer..
  • MCU embedded technology.Work Voltage:DC 12V-30V(Power requirements:> 100MA).
  • Select the PWM signal input level range through short-circuit.The peak of 4.5V to 10V level. The short cap install in ‘5V’. This level is used for normal controller or 5V MCU.
  • The peak of 12V to 24V level, so inserted in 24V. The short cap install in ‘24V’. This level is used for normal PLC controller..
Check Stock

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

  • Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
  • In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
  • There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
  • Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
  • If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..
Check Stock

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock

Noctua NF-F12 PWM Premium Quiet Fan 4-Pin 120mm Brown

  • Premium quiet fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 22.4 dB(A), >150,000 h MTTF.
  • Award-winning 120x25mm fan with Focused Flow frame for high static pressure and superior quiet cooling performance.
  • Ideal for CPU heatsinks (e.g. Noctua NH-U12(S) series) and water cooling radiators, perfect replacement fan for loud all-in-one (AIO) coolers.
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Noctua NF-A6x25 PWM, Premium Quiet Fan, 4-Pin (60mm, Brown)

  • Premium quiet fan, 60x60x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 19.3 dB(A), >.
  • Award-winning 60x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • Ideal replacement for noisy or broken 12V 6cm fans in DVRs, NAS, network and storage devices, 3D printers, etc..
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 550-3000rpm speed range (2100rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Noctua NF-A12x15 PWM, Premium Quiet Slim Fan, 4-Pin (120mm, Brown)

  • Premium quiet slim fan, 120x120x15 mm, 12V, 4-pin PWM, max. 1850 RPM, max. 23.9 dB(A), >150,000 h MTTF.
  • Award-winning A-series design with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • 120x15mm slim design ideal for low-profile CPU coolers, HTPCs, ITX builds, space-restricted applications etc..
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 1850rpm maximum speed (1400rpm with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Noctua NF-A14 PWM, Premium Quiet Fan, 4-Pin (140mm, Brown)

  • Premium quiet fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 24.6 dB(A), >150,000 h MTTF.
  • Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • Square frame design is ideal for water cooling radiators (AIO or DIY), PC cases and other chassis (intake & exhaust), cabinet ventilation, etc..
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

Noctua NF-A8 PWM Premium Quiet Fan 4-Pin 80mm Brown

  • Premium quiet fan, 80x80x25 mm, 12V, 4-pin PWM, max. 2200 RPM, max. 17.7 dB(A), >150,000 h MTTF.
  • Award-winning 80x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • 8cm format is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other....
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 450-2200rpm speed range (1750rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock

POWER ACOUSTIK BAMF1-5000D BAMF Series Monoblock Class D Amp (5,000 Watts...

  • Bass Restoration with Lighted Display, Illuminaited Logo Plate and Chrome Finish. Eyes Light up with Red LED's.
  • Max.Bass Control with Dash Mount Remote Control for PFM Subsonic Filter & Bass Level Control.
  • Balanced Inputs, Bass Output Control with PWM High Head Room Power Supply.
  • Output Level: 13.5 volts, Frequency Response: 10Hz - 100KHz.
  • THD: 0.002%, S/N Ratio: 132dB, Balanced Input Noise Rejection: 60 dB.
Check Stock

Corsair ML140 PRO 140mm Premium Magnetic Levitation RGB LED PWM Fan with Lighting Node Twin Pack (CO-9050078-WW) & iCUE Commander PRO Smart RGB Lighting and Fan Speed Controller

  • Product 1: Magnetic Levitation Bearing: Dramatically reduces bearing friction by magnetically levitating the fan blade, producing lower noise and higher performance. Air flow - 55.4 CFM. Noise level - 20.4 decibels.
  • Product 1: Dynamic RGB Lighting: Four independent ultra-bright center-mounted RGB LEDs output a vivid blast of light and color.
  • Product 1: Control, Customize and Sync: The included CORSAIR Lighting Node PRO enables stunning dynamic lighting effects with other CORSAIR LINK supported devices.
  • Product 1: Complete PWM Control: Dynamically control fan speed from 400 RPM to 1,200 RPM to minimize noise or maximize airflow.
  • Product 2: The CORSAIR iCUE Commander PRO turns your case into a smart case, using CORSAIR iCUE software to control up to 6 case fans and 2 RGB lighting channels..
  • Product 2: Powers up to 6 DC or PWM fans with voltage and PWM control, including the ability to run at zero RPM for total silence..
  • Product 2: 2 RGB lighting channels provide powerful software control of CORSAIR individually addressable RGB LED strips and CORSAIR RGB fans..
  • Product 2: 4 repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with CORSAIR iCUE software..
Check Stock

Noctua NF-A8 PWM, Premium Quiet Fan, 4-Pin (80mm, Brown)

  • Premium quiet fan, 80x80x25 mm, 12V, 4-pin PWM, max. 2200 RPM, max. 17.7 dB(A), >.
  • Award-winning 80x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • 8cm format is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc..
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 450-2200rpm speed range (1750rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header.
Check Stock