Top Pwm Dc Motor Controller

DORHEA PWM DC Motor Speed Controller DC 10-55V 24V 36V 48V 60A Stepless Motor Speed Controller with Adjustable Potentiometer Forward-Brake-Reverse Switch and LED Digital Display DC Brush Motor

  • Motor speed controller input supply voltage: DC 10V-55V.
  • The motor speed controller is an aluminum case, very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • The pmw dc motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • The stepless motor knob adjusts the motor speed from 0% ~ 100% smoothly with LED display is accurate to show 0 ~ 100% of the motor speed..
  • The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt, the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Check Stock

DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation

  • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W..
  • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time..
  • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation..
  • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ..
  • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module..
Check Stock

10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps

  • PWM Duty Cycle:0%-100% and Quiescent current is 0.04A( not over 40mA when voltage is DC10V to DC30V).
  • Operating temperature:-20 to 40.It can perform normally when the temperature is below 0.
  • Universal speed controller can be used for DC brush motor, suitable for car cooling fan motor, car air conditioning motor, exhaust blower, treadmill motor, etc.
  • This motor speed controller can also be used for dimming DC lamps or controlling DC heater.
Check Stock

RioRand Upgraded Adjustable DC Motor Speed PWM Controller 10V 12V 24V 30V Reversing Switch 120W

  • Overload short circuit protection current:4A ,short circuit time does not exceed 30 seconds.
  • PWM Pulse Width Modulation Range: 5% -95%.
  • Please note that this controller has a low frequency causing some types of the motor to whine at low speeds but not all motors will be like this.
Check Stock

RioRand 400W 6-60V PWM DC Brushless Electric Motor Speed Controller with Hall

  • 1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
  • 2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
  • 3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
  • 4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
  • 5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..
Check Stock

DC Motor Speed Controller,Hima Brush Motor Driver Controls Module DC 9V-60V 12V 24V 36V 48V 60V Motor Pulse Width Modulator Regulator 20A 1200W PWM Monitor Dimmer Governor with Switch & Knob

  • Parameters: motor speed controller input voltage range is 9-60V, output current range is 0-20A, continuous power is 1200W..
  • Application: the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
  • Speed Control: our motor control board can regulate motor speed by potentiometer.
  • what's more, it support clockwise/anticlock-wise rotation adjustment..
  • Easy Wiring: thick red wire for the positive of the power supply, and thick balck for the negative.
  • thick blue wire for the motor positive, and the thick green for the motor negative..
  • PWM: the advantage of using a pulse width modulation (PWM) method for dimming / speed regulation is that the energy of the power supply can be fully utilized and the circuit is highly efficient..
Check Stock

tatoko DC Motor Speed Controller 10V-55V 12V 24V 36V 40A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch,Ajustable Potentiometer &Digital Display

  • Input supply voltage: DC 10V-55V；Maximum current: 60A； Continuous current: 40A.
  • Potentiometer with switch function,High power speed controller switch which is much more adaptable.
  • DC10V-55V PWM Brushed DC Motor Speed Controller Adjustable Driver CW CCW Reversible Switch With Digit Display.
  • Outer casing: it is designed to protect the controller board from damage as well as dissipate heat.
  • The input voltage must differentiate "+" ,"-.
Check Stock

Laguna 12|16 Midi Lathe EVS

  • Controller: pulse width modulation (PWM).
  • Recommended breaker size: 110V – 15 amp.
Check Stock

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

  • Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
  • High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
  • Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
  • Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
  • Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
  • production line conveyor belt speed regulation.
Check Stock

DZS Elec 10A 12V-40V DC Motor Speed Controller 12V 24V PWM Variable Speed Regulator Governor Switch CCMHCN With Speed Control Knob

  • Type: DC 10A 12V-40V motor speed controller, high efficiency, high torque, low heat radiation..
  • Function: With power supply reverse polarity protection, over-voltage protection, 10A standard fuse over-load protection, more safer and reliable..
  • PWM Duty Cycle: 10%-100%, Control Power: 0.01-400W, adopting variable speed knob potentiometer to control motor speed..
  • Rated Current: 8A, Max Current: 10A, Quiescent Current: 0.02A (Standby).
  • Applications: Suitable for DC motor speed control, PLC speed control etc..
Check Stock

PEMENOL Motor Speed Controller PWM DC 5V 12V 24V 150W Adjustable Speed Regulator with Stepless Variable Rotary Switch PWM Signal Generator Driver Module

  • ★Digital Rotary Encoder Button: The rotary encoder adopts the principle of digital pulse, the output will be as much as you rotate it, and the same value will be input when you rotate it next time. Good repeatability, high precision, can be quickly adjusted to the value you want.
  • ★Soft-start Protection: The motor controller has a soft-start protection function that can effectively reduce the inrush current, protect the motor and prolong the life of the motor.
  • ★Duty Cycle, Duty Cycle Upper and Lower Limits and Working Frequency Can Be Set: The 3 digits LED motor speed regulator can adjust the duty cycle, the upper and lower duty cycle limits and the operating frequency. Convenient for customers to use according to the working characteristics of their own motors. The adjustable electronic speed controller can automatically save the set parameters to prevent data loss after a power failure.
  • ★With the Start and Stop Button: The PWM DC motor governor with start and stop button, and can be controlled by an external switch, meet your multiple control needs. Maximum power: 150W. Working voltage: DC5V~30V, input with anti-reverse connection protection.
Check Stock

DaFuRui 2Pack Upgraded 6V-90V 15A DC Motor Pump Speed Controller，16KHZ PWM Speed Controller Regulator Module Board with Speed Control Knob (6V-90V 15A DC Motor)

  • ★Upgraded 6V-90V 15A DC Motor Pump PWM Speed Controller and PLC voltage can be directly controlled..
  • ★Its own power supply reverse polarity protection, control voltage over-voltage protection, 20A fast-blow ceramic fuse..
  • ★Adjust the order of the cable to change the orientation，can control motor speed to change from 0 percent to 100 percent..
  • ★Adjust the knob of potentiometer to change the output occupying Vacancy proportion of controller, and the motor speed will change..
  • ★Rated Current: 8A, Max Current: 15A, Quiescent Current: 0.005A (Standby)..
Check Stock