Top Pwm Fans

LRONG 1PC PC Chassis Fan Hub CPU Cooling HUB Fan PWM Hub SATA Controller Speed Controller

  • 12V 10-way 4pin SATA fan hub, to solve the problem of insufficient motherboard fan ports. The hub has 10 fan ports, can support 10 fans, can meet various host requirements, and supports 3pin/4pin fans..
  • Installation steps: The PWM port is connected to the CPU fan port on the motherboard. The red port is dedicated to the CPU fan. Connect 1 fan to the red portand then connect the rest of the fans. Then you need to connect the fan hub’s PWM cable to the motherboard. Connect the SATA cable to the fan hub..
  • Equipped with PWM cable: The hub is equipped with a PWM cable with a length of 40CM, which can support the back line. After the PWM cable is connected to the main board, the temperature control and speed can be controlled by the main board..
  • Convenient installation: the hub is fixed with 3M glue, and the back of each hub is equipped with an American 3M glue, which can make the hub work well.
  • Package content: 1 X 12V 10-channel 4pin fan hub, 1X PWM connection cable..
Check Stock

Vetroo A03 Black Mid-Tower ATX Gaming PC Case, Pre-Installed 3X ARGB&PWM Fans, Door Opening Tempered Glass Panel, High Airflow Mesh Front Panel Computer Case Come with Fan Controller Hub

  • Mesh & Tempered Glass Panel: The mesh front panel and top dust filter provide more airflow and cooling, and the hinged transparent tempered glass side panel is easy to remove without any tools..
  • Pre-installed 3pcs ARGB/PWM Fans: The case pre-installed 3pcs 120mm ARGB and PWM fans in the front, which provides your case the great airflow cooling and colorful lights..
  • Controller Equipped: With 5V 3Pin addressable RGB and 12V 4Pin PWM interface, it can be connected to synchronize RGB lighting and PWM of fans. (Note: Only with the white PWM port connected, can other PWM ports sync PWM features.).
  • Better Cooling Airflow: Support up to 6pcs fans at the same time, It also has room for 240mm/360mm water cooler. It provides a great airflow and keeps your case cooling all the time..
  • Sufficient Internal Space: Compatible with ATX, Micro-ATX, Mini-ATX motherboard. This case supports CPU coolers up to 165mm tall and GPU up to 350mm long, you can install GPU horizontally and vertically with a VGA holder, It can support 2Pcs 3.5” HDD and 2Pcs 2.5” SSD drive bays..
  • Cable Management System: 2 wire combs are included behind the motherboard tray to aid in cable management and keep your case more cleaner..
Check Stock

3 Pack PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)

  • PC fan splitter cable：these 27 cm extension cables allow you more choice in where you want to position your PWM or fans inside your case, good for your daily use.
  • This Y-type splitter cables is convenient for running three fans on one fan header.
  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header ；Every Pack Compatible With 1 pcs 4 Pin + 2 pcs 3 Pin PMW Fan Connector.
  • CPU fan splitter cable Product function:provide two additional fan to increase airflow in your computer case, reduce the accumulation of heat within the chassis.
  • The 4-pin connector supports 3-pin and 4-pin fans.
  • Temperature control: the pwn fan splitter cable provide additional fans to increase airflow in the computer case, reduce the temperature and ensure the operational speed of CPU.
  • Supports 3 PWM fans from a single motherboard PWM header.
  • Compatible with 4pin PMW fan connector and 3pin fan connector.
Check Stock

FBHDZVV 4Pin PMW Fan Splitter Cable to 3Pin/4Pin PC Case Fan Sleeved Adapter Cable 1 to 3 PMW Fan Splitter Extension Power Cable Splitter Y Power Adapter Cable PC Computer Cooling Fan Wire Connector

  • The PWM molex fan extension cable for PC motherboard cooling fans are constructed using high-quality material, 10.5 inches cable is strongly braided, sleeved and wrapped to provide long-lasting performance as well as to avoid dust..
  • The PC case fan sleeved adapter cable is designed with a 4-pin (Actual 2-Pin) mol-ex connector on the one end and on the other end it splits into 3 X 3/4-pin connector, the ergonomic design of the extension cord offers you a greater flexibility to position your PWM or fans inside your internal case..
  • The molex fan connector types of PWM fan extension cable includes one 4-pin(Actual 2-Pin) molx connector and 3/4-pin male plug connector. Please note this 4-Pin Molex is actual 2-Pin but it still works fine on your computer..
  • Motherboard 4-pin interface, PWM speed control, can be used for multiple cooling fans, expand and expand motherboard 4-pin interface suitable for CPU or computer chassis fan..
  • Molex fan splitter easy to plug, the fan extension cable offers greater flexibility between motherboard and CPU cooling fans.Easily realize the parallel connection of 4-pin PWM temperature-controlled fans, so that the fans can achieve a quieter effect and better heat dissipation..
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Gavemi Fan Splitter, PWM 4 Pin PC Case Fan Splitter Adapter Cable Compatible 3 Pin Fan, 12.6 inches

  • Fan splitter cable is compatible with all brands of 4-pin PWM fans and 3-pin fans..
  • It is possible to run three chassis fans at the same time on a single PWM fan header and control the speed..
  • 4 pin fan splitter is a black cable sleeve to make the inside of the case more concise..
  • ength 12.6 inches, 24 AWG pure copper conductor. Pack of two case fan splitter cables..
  • PC fan splitter has a 4-pin male fan connector connected to the motherboard, and the fan header splitter at the other end has three 4-pin female connectors connected to the PWM case fans..
Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis’ rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

darkFlash 120mm RGB Case Fan, CX6 Addressable ARGB Fan with RGB PWM Fan Hub, High Airflow 5V Motherboard Sync, Ultra Quiet, PWM Static Pressure Fan, High Performance Computer Case Fans, 5 Pack

  • 5V ARGB ADDRESSABLE RGB: 5pack 120mm case fans colors can be set through the mainboard software controller, Sync with 5V RGB enabled motherboards, and intelligent PWM speed control. Use software to achieve more free personalized customization. At the same time, RESET button control can be selected to connect..
  • PWM FAN and PWM CONTROLLER: The speed of the argb fans can be read through the motherboard software, Also the motherboard can automatically control the speed of the computer case fan according to the temperature of the chassis, Efficient energy saving and environmental protection..
  • PERFECT COOLING PERFORMANCE: Dynamic speed adjustment between 800 rpm to 2,000 rpm pushing up to 55.29 CFM of air, Sound Level- 18 dBA, minimizing noise or maximizing airflow. Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling..
  • SPECIAL SHOCK-PROOF DESIGN: Ultra-bright RGB LED lights, provide full lighting for your build, achieving magical lighting effects with multiple-choice controls and multiple different modes. 16.8 million colors provide excellent heat dissipation, add fun and bring you a better gaming experience..
  • SIMPLE INSTALLATION & WARRANTY: 120mm CX6 5pack RGB fans link hub can use PWM and ARGB functions....
Check Stock

upHere 3-Pack High Airflow Quiet Edition White LED Case Fan pwm 4in for PC Cases T4WT4-3

  • PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
  • 1 to 2 case fan splitter connects an additional fan to....
  • Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using....
  • Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed....
  • Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
  • Sleeved and wrapped black 4-inch PWM Y cable provides a....
  • 3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler....
Check Stock

Phanteks Enthoo Pro Full Tower Chassis without Window Cases PH-ES614PC_BK,BLACK NO WINDOW

  • Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
  • Appearance: Brushed plastic with an aluminum appearance.
  • Stealth interior: hidden PSU / hidden HDD.
  • The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
  • Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
  • Innovative liquid cooling mounting systems.
  • Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).
Check Stock

Thermaltake Commander FP SATA Powered 10 Port 4-Pin PWM Fan Hub AC-023-AN1NAN-A1

  • Supports 10 (4-pin) Independent Fans :Capable of connecting 10 PWM fans, the Commander FP enables users to optimally expand cooling capability within the chassis.
  • Direct SATA Power Input: Powers up to 9 PWM fans simultaneously from PSU to prevent stray current when the fan hub is in use.
  • Included Ties/Velcro for Easy Placement: 5 reusable beaded cable ties, 2 velcro tabs, and one PWM signal cable that let users keep the cables neat and tidy and hold the fan hub steadily in place.
Check Stock

Fractal Design Torrent Gray E-ATX Tempered Glass Window High-Airflow Mid Tower Computer Case

  • Open grille and 180 mm front fans optimized for maximum air intake.
  • Newly developed 180 x 38 mm Dynamic X2 PWM or Prisma AL PWM ARGB fans (in the RGB version) leverage power, size, and thickness for massive air-moving....
  • Includes five PWM fans (three 140 mm and two 180 mm) for balancing performance, cooling and noise.
  • New layout with expansive base intakes and extra-large bottom fan support offers exceptional GPU cooling.
  • Optional front and bottom nylon filters included, allowing the user to prioritize between dust filtering or even higher airflow.
Check Stock