Top Pyle Pcm60a

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

OREI Digital to Analog Audio Converter - Optical SPDIF/Coaxial to RCA L/R with 3.5mm Jack Support Headphone/Speaker Output DA21

  • Converts coaxial or optical digital audio input to analog stereo output over RCA and 3.5mm mini jack. Will not convert Dolby Digital Signal. Make sure to change to TV Output To PCM.
  • Supports all popular sample rates including 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz, at up to 24-bit resolution.
  • This Device will not convert Dolby Sound. It is only a converter not a Decoder. So make sure your device does not require Dolby conversion..
  • TROUBLE SHOOT - If your getting a Clicking Sound - Most likely your TV output is not set to PCM. Please change it PCM. Or if your getting Screeching or No Sound - Most likely you are trying to decode Dolby Sound to Analog. You will need a DA34 or DA34X.
  • INCLUDES DA21 Converter, Power supply, User Manual.
  • KINDLY NOTE : The DA21 will only support PCM audio output mode.It doesn't support Dolby, DTS, 5.1ch or 7.1 ch audio signals..
Check Stock

Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.) - PMKS5

  • HEIGHT ADJUSTABLE: Pyle compact base microphone stand smoothly quick and easy, raise or lower height adjustment from 33.5" inch to 60.24'' inches high. Also, Pyle used USA standard 5/8 x 27 external thread size.
  • RELIABLE STURDY BASE: It is solid die-cast and base for about 235mm in diameter. Pyle mic stand will provide stability and precise balance to avoid it from falling. And 9.92 lbs. counterweight for a stable microphone placement.
  • CONVENIENT DESIGN: This is an ideal mic stand for the musician that’s always on the go. It’s ultra-light pack up with sleek black finish is ultra-light for easy transport. It is also built compactly to be both durable for long term use.
  • STUDIO AND CONCERT USE: Perfect mic holder positioning and optimal pickup for the studio and concert performances. The Pyle PMKS5 is a class at its own.
Check Stock

Pyle Home PHSP4 6 Indoor/Outdoor 50-Watt PA Horn Speaker

  • SPEAKER PAIR: New Pyle PHSP4 6" Indoor / Outdoor 50 Watts PA Horn Speaker (Pair).
  • WATTAGE: The P1683 6" 8-Ohm white speakers come as a pair, have a power handling of 50 Watts RMS.
  • INCLUDES: Mounting Bracket & Hardware Included.
  • SPECIFICATIONS: Famous Pyle build quality with a full 1-year warranty when purchased from an authorized Pyle reseller.
Check Stock

HiFi DAC+Sound Card Pifi DAC + PCM5122 DAC I2S Interface Analogue Output Signal Digital Audio Card Compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64-bit)

  • Good performance: PCM5122 integrates a negative charge pump, and the output does not require a DC blocking capacitor.
  • very good ability to suppress noise in the frequency band. Since the load support is as low as 1K, PCM510xA can drive a variety of parallel products..
  • Ensure the continuity of signal impedance: Sound card Pifi DAC’s gold-plated RCV double clip and gold-plated 3.5 mm jack socket (recommended by amplifier). It is perfectly compatible with the official PI HAT size of the Raspberry Pi, based on the high gold plating process of the circuit board, and the arc line (high-end HIFI DAC adopts the arc line), which better guarantees the continuity of signal impedance and reduces signal reflection and refraction..
  • Pifi DAC + PCM5122 DAC: Pifi DAC + PCM5122 DAC, I2S interface, analog output signal, compatible with Raspberry Pi B + a + 2B Raspberry Pi 3B (64 bit). Provide infrared receiving interface..
  • Get rid of the current sound: The RPI+DAC HiFi kit uses an insulated power supply design to isolate the Raspberry Pi nutrition from the DAC part of the independent power supply, and the beads do not interfere with each other, and get rid of the sound of electric current. With this RPI+DAC HiFi kit, you can easily get m....
Check Stock

4K@60HZ HDMI Audio Extractor, HDMI 2.0b Audio Splitter Converter, HDMI to HDMI + Optical Toslink SPDIF + 3.5mm Stereo Audio with Control Output Analog Volume Knob Compatible for PS5/4/3/Blu-ray player

  • ... product is an HDMI extractor and HDMI splitter with control output analog volume knob, you can control HDMI extractor volume. Note: This unit does not support the ARC function..
  • 3 AUDIO MODE SETINGS- HDMI audio extractor splitter have Pass, 2.0CH, 5.1CH 3 kinds of audio mode options. 3.5mm audio output supports 2CH PCM LPCM stereo audio.
  • Optical SPDIF output supports 2CH PCM, 5.1CH Dobly Digital, Dobly TrueHD, DTS-HD, DTS.(Please set audio format on HDMI Source to PCM/ LPCM format to use If your device can't support these formats)PCM Setting Path: Device homepage -- system setting -- image and sound -- voice setting -- digital audio output -- PCM..
  • WIDE COMPATIBILITY- HDMI to Optical Audio Adapter suitable for various HDMI source devices to meet different needs. HDMI input: Blu-ray/ DVD/ HD player, cable/satellite box, Fire TV, Apple TV, PS3/PS4/PS5, Xbox, PC/laptop, HD camera, HD DVR etc. HDMI Output: Full HD TV, Monitor, Projector. Audio format: Speaker, Amplifier, Soundbar, D-o-l-b-y Digital, Dobly TrueHD, PCM 5.1/2.0.(Not suitable for passive speakers，An amplifier is required for use with this speaker).
Check Stock

16-25' Bay Boat: Pyle Bluetooth Marine USB MP3 Stereo Receiver, 4 X Pyle 6.5'' Waterproof White Speakers w/LED, Pyle 4 Channel Boat Amplifier, Amp Install Kit, 18 Gauge 50 FT Speaker Wire, Antenna

  • PACKAGE INCLUDES: 1 X Pyle Bluetooth Marine USB MP3 Stereo Receiver, 4 X Pyle 6.5'' Waterproof White Speakers w/ LED, 1 X Pyle 4 Channel Boat Amplifier, 1 Enrock Amp Install Kit, 1 x 18 Gauge 50 FT Speaker Wire, 1 x Antenna.
  • RECEIVER AND ANTENNA: The Pyle PLMRB29W Stereo Radio Headunit Receiver features Bluetooth wireless music streaming and hands-free calling ability. The 22' cable works great on land or at sea for full AM/FM reception wherever it is available..
  • SPEAKERS AND WIRES: The Pyle Waterpoof 6.5'' Speakers feature built-in multi-color LED lights. Upgrade your audio by adding an exciting visual treat for your eyes as well as crisp stereo sounds for your ears. The wire is 18 gauge and a 50 ft. spool..
  • AMPLIFIER: Capable of powering multiple sets of component, pro audio, or coaxial speakers, this amplifier packs the power that will allow your speakers to come alive..
  • AMP INSTALLATION KIT: Get all the wires you need to hook up a new marine audio system with this Enrock 8 Gauge amplifier installation kit..
Check Stock

21-29' Pontoon Boat: Pyle Bluetooth Marine Receiver, 4 X Pyle 6.5'' Waterproof White Speakers w/LED, Pyle 4 Channel 1000 Watt Marine Amplifier, Amp Install Kit, 18 Gauge 50 FT Speaker Wire, Antenna

  • PACKAGE INCLUDES: 1 X Pyle Bluetooth Marine USB MP3 Stereo Receiver, 4 X Pyle 6.5'' Waterproof White Speakers w/ LED, 1 X Pyle 4 Channel PLMRA430BT Boat Amplifier, 1 X T-Spec Amp Install Kit, 1 x 18 Gauge 50 FT Speaker Wire, 1 x Antenna.
  • RECEIVER AND ANTENNA: The Pyle PLMRB29W Receiver features Bluetooth and hands-free calling. You will be able to instantly connect and stream audio files, along with the receiver doubling as your Smartphone. Antenna included for a reception boost!.
  • 6.5" LED SPEAKERS: The Pyle Hydra Waterpoof 6.5'' Speakers feature built-in Blue LED lights. These speakers features 240 watts of peak power, providing you with an impressive sonic output for all of your listening needs!.
  • SPEAKER WIRE: This Enrock marine speaker wire is water-resistant, so it's ideal for use in your new marine installation. This blue and white wire is 18 gauge and comes on a 50 ft. spool..
  • AMP AND INSTALL KIT: This amp will power your speakers on the dock, in your boat, or by the pool. This amp takes both high and low level inputs, so it's compatible with a variety of head units. Amp kit included for easy installation!.
Check Stock

Drum Lug, Instrument Accessories Iron Bass Ears Drum Set WC705 for Snares for Drums Kit

  • Only for Pyle Cajon Model PCJD15: Introducing a fashionable storage bag exquisitely designed to suit your Pyle Cajon.
  • Model PCJD15. With this elegant and super convenient bag, you can now travel anywhere you want with your Cajon.
  • Absolute Protection: This elegant Cajon bag is the best thing that can ever happen to your Pyle Cajon PCJD15.Your Cajon is fully protected from dust, dirt, moisture, shock, making your Cajon last much longer than it should (without storage bag).
  • Strong and Reliable: The Pyle Cajon storage bag is built to outlast other brands out there in the market. It’s made with state-of-the-art equipment and high-quality fabric. It’s built strong enough to carry not only your Cajon but other smaller items.
  • Convenient Bag: Easy and convenient zipper for easy closure and opening of the bag, a convenient handle allows you to carry your Cajon without any discomfort, it gives you a convenient hand feel. Total size (LxWxH) 19.0”x13.0”x13.0”, weighs 2.01lbs.
Check Stock

Wireless Portable PA Speaker System - 700 W Battery Powered Rechargeable Sound Speaker and Microphone Set with Bluetooth MP3 USB Micro SD FM Radio AUX 1/4' DJ lights - For PA / Party - Pyle PSUFM1280B

  • POWERFUL 700 WATTS: Pyle portable 12-inch subwoofer speaker system is equipped with 700 watts power. It also features full range stereo sound reproduction and treble bass echo volume controls for impressive bass response.Mounting Type:Floor Standing.Speakers maximum output power:700 watts.
  • FLASHING DJ LIGHTS: Pyle high-powered active speaker tower features multi-colored LED party lights. It has LED lights power switch ON/OFF. Built-in convenient carry handle, wheels and rechargeable battery for portability.
  • WIRELESS BLUETOOTH STREAMING: Pyle DJ dance speaker has an instant wireless music streaming ability. It features simple and hassle-free pairing that works with all of today’s latest devices such as smartphones, tablets, laptops, computers, and etc..
  • AUDIO RECORDING MODE: Pyle portable PA speaker system features one button record activation. The product can record audio as streamed through the speaker system and via microphone. Perfect for karaoke, crowd control, and even public gatherings.
  • 4 MEDIA INPUTS: Pyle PA loudspeaker offers micro SD card, MP3 and flash USB connectivity. Simply load your card or flash drive and connect to your unit to get started. It also comes with FM Radio and wireless handheld microphone..
Check Stock

Transfer Panel (60A/60A), Briidea Transfer Switch for Portable Generators 15,000 Watts, Manual Transfer Switch Kit

  • SAFE: Preventing dangerous back-feeding to avoid injuring utility line workers, and also protect your generator. Interlocked breakers completely isolate the generator from the utility at all times..
  • EASY & CONVENIENT: Easily switches from utility to 60-amp portable generator power in an emergency. Eliminating the need for multiple extension cords. Installing a transfer switch is the most convenient way to feed power from a generator to important circuits you want to use..
  • COMPATIBLE: Designed for generators up to 240 volts, 15,000 maximum running watts. Offers circuit breaker combinations of 60A for generators and 60A for utility..
  • VERSATILE: May be used as main panel for a single load or to feed a sub-panel..
  • SIMPLE INSTALLATION: The pre-wired transfer switch and sixteen combination knockouts makes for easy wiring. Highly recommended to call professional electrician to install if you are not experience..
Check Stock

Insignia Optical/Coaxial Digital-to-Analog Converter – Black

  • PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed).
  • Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial).
  • Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack.
  • Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included).
  • Do Not Use Other Plugs, It Can Only Use 5V 1A Plug.
  • Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz.
  • 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels.
  • Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output.
  • Provides Electromagnetic-noise-free Transmission(5.1 channel is incompatible, please set the audio output to PCM or LPCM）.
  • Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.
Check Stock