Top Quartz Clock Movement Replacement

2 Pieces Silent Clock Movement Mechanism Long and Short Shaft Clock Mechanism with 6 Different Pairs of Hands DIY Clock Repair Parts Motor Replacemen

  • Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any....
  • Two Clock Mechanism Size -Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mmthickness clock panel. Long Total....
  • DIY Wall Clock Repair Parts Kits: Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for....
  • Clock Hands Size:The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or....
  • Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to....
Check Stock

Clock Motor Movement Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (Shaft Length 0.9 Inch/ 23 mm, Black Red)

  • Features: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands, good for repairing, replacing or making a clock by yourself, these replacement parts suit well to different styles of clock frame.
  • Size: total shaft length is 23 mm (0.9 inches), thread length is 14.6 mm (0.57 inches).
  • Jump second movement, suitable for 9 - 13 mm (0.35 - 0.51 inches) thickness clock panel.
  • Hole center to the tip hand size: the hour hands are approx. 70.5 mm/ 2.78 inch, 70 mm/ 2.76 inches and 82 mm/ 3.2 inches respectively, minute hands are approx. 101 mm/ 3.98 inches, 92 mm/ 3.6 inches and 117 mm/ 4.6 inches, 2 second hands are approx. 100 mm/ 3.9 inches, 1 second caps is approx. 7 mm/ 0.28 inches.
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.
Check Stock

Katfort Clock Hands and Motor Kit, 3 Pieces Clock Mechanism Replacement, DIY Quartz Clock Mechanism Kit with 7 Pairs of Hands(20mm/0.79inch)

  • Size: The total shaft length is about 20mm/0.79" and the thread length is about 13mm/0.51". Clock movement repair kit is suitable for clock dials with a thickness of 9 - 13mm / 0.35 - 0.5"..
  • Accurate Time and Quiet Motor: Clock parts kit provides extreme accuracy and reliability. It is equipped with 6168s silent sweep second movement, no ticks, which will provide you with a quiet environment..
  • 7 Different Styles of Hands: This clock replacement mechanism comes with 7 pairs of different pointer and length. It's perfect for repairing clocks, clock replacement or making your own customized clock project..
  • Wide Application: These quartz replacement clock motor can be applied in bedroom, living room, office, classroom, restaurant, etc, fit for craft clock, quartz wall clock and so on..
  • Note: When you install this clock diy kit, please keep the hour hand and minute hand parallel, and not tighten the brass hex nut too tight..
Check Stock

Quartex

  • ♥High torque movement: long spindle quartz clock replacement movement parts with metal hook and 3 different pairs of hands(2 black and 1 white),....
  • ♥ Size: total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches).
  • Sweep second movement, suitable for 1 -4 mm (1/ 25 - 5/32....
  • ♥ Three of most popular clock hands. Different Size,Color and Styles. Meet different needs only in one package. The Diameter of Clock Panel should....
  • ♥ Compatible clock: applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY....
  • ♥ Package contents: a clock movement,a metal hook,3 Second hands,3 Minute hands,3 Hour hands,3 Plastic washers,3 Brass washers and 3 Brass nuts,come....
Check Stock

Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Silver)

  • Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.
  • Movement size: shaft length is 31 mm (1-1/ 5 inch).
  • Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
  • Center of hole hand size: hour hand is approx. 90 mm (3.5 inch).
  • minute hand is approx. 120 mm (4.7 inch).
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel.
Check Stock

31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Black)

  • Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.
  • Movement size: shaft length is 31 mm (1-1/ 5 inch).
  • Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
  • Center of hole hand size: hour hand is approx. 90 mm (3.5 inch).
  • minute hand is approx. 120 mm (4.7 inch).
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel.
Check Stock

ANDSTAR 12Inch Modern Wall Clock Silent Non Ticking Battery Operated Round Wall Clock for Home,Living Room,Bedroom,Office,Canteen,School Decorative (Multicolor)

  • 【DIMENSIONS】: This clock has a diameter of 12 inches .After operated by 1 AA Carbon Zinc battery(Not Included), the precise quartz movement will guarantee accurate time..
  • 【Superior Movement Quality】: Reliable clock mechanism to guarantee accurate time, quiet sweep second hands ensure a good sleeping and work environment, this clock will definitely impress you..
  • 【MODERN & SIMPLE DESIGN】:Round clock face design to fit into any decoration which is once both familiar and stylish. It is well-suited for living rooms, bedrooms, schools, kitchen, and office decor, etc.. It also can be used as a wonderful gift for your families and friends..
  • 【SUPERIOR MOVEMENT QUALITY】:High quality quartz movement, keeps accurate time,slight ticking.Jumping seconds movement wall clock is very power efficient and durable..
  • 【100% SATISFACTION】:If anything at all goes wrong with your clock, please contact us by email freely.We guarantee to provide 30 days return and replacement service and lifetime free customer service..
Check Stock

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement (13 mm)

  • Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits.
  • There are various styles to choose which is very suitable for different styles of clock frames.
  • Size: the total shaft length is approx. 13 mm/ 0.5 inch, and the thread length is approx. 6 mm/ 0.24 inch.
  • The clock movement mechanism are suitable for 1 - 3 mm/ 0.04 - 0.12 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter, when you install this clock movement kit, please check the sizes.
  • Quality material: the movement is made of ABS material, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant, sturdy for a long time to use, providing you with nice use and decorative effect.
  • Clock design: the design of the clock hands are simple and stylish which have a various styles.
  • The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
  • Widely applicable: these clock repair replacement parts are suitable for cross-stitch, 3 dimensional embroidery, craft clocks, frame-less wall clocks, especially for DIY quartz wall clock to replace for using.
Check Stock

Mudder Long Shaft Clock Movement, 4/5 Inch Maximum Dial Thickness, 1-1/5 Inch Total Shaft Length

  • Long spindle quartz clock: good handwork DIY clock replacement movement parts with hook, which meet your installation needs.
  • Movement size: total shaft length is 31 mm (1-1/ 5 inch).
  • Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
  • Hand length: total hour hand length is about 86 mm (3.4 inches).
  • Total minute hand length is about 116 mm (4.6 inches).
  • Easy to install: the clock movements kits installation is very easily.
  • Long spindle, delicate design and looks elegant, simple, replacement part suit well to different styles clock frame.
  • Compatible clock: applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc..
  • Suitable for repairing, replacing or making a clock.
Check Stock

Quartex Spacekid & Andre Wildenhues Extended

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable....
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick....
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and....
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

6Pcs Quartz Clock Mechanism Kit Wall Clock Mechanisms Mattery Powered Replacement Clock Movement Parts Motor Replacement DIY Repair Parts with 6 Set Hands No Battery

  • 6pcs Clock Mechanisms & Two Size: Short total shaft length 16 mm (0.63 in), thread length 8mm (0.315 in), suit for 3 - 6 mm thickness clock panel.....
  • Silent Clock Mechanism: YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a....
  • Material&Package: The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 6 clock movements in....
  • Wide Application: DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless....
  • Warm Notice: Please double-check the dimensions of this clock mechanism replacement movement before purchasing.
  • they are made of aluminum, and please....
Check Stock

4 Pieces Quartz DIY Wall Clock, Clock Numerals Kit, Movement Mechanism Battery Operated Clock Motor Kit with 6 Different Pairs of Hands for DIY Clock Repairment

  • Package includes: 2 pieces Arabic numerals and 2 pieces roman numerals are in gold and silver colors, each color each style has 1 piece.
  • 4 Pieces quartz clock movement mechanisms with 6 sets of clock hands with different styles and length, enough quantity for daily use and replacement.
  • Dimension details: the single word of Roman and Arabic numerals is 1.1 inches in height, the total shaft length is approx 16 mm/ 0.62 inches, and the thread length is approximately 6 mm/ 0.24 inches.
  • The high torque clock movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel and the clock hands fit for a diameter of 25 - 35 cm/ 9.9 - 13.8 inches clock surface.
  • Easy to use: you only need to use the glue, then you can easily make the clock panel, the whole applying process is simple and fast.
  • The installation of the hands is also very simple, and you just need to keep the hour hand and minute hand parallel, then place the hour and minute hands on the movement in turn.
  • Multiple styles and colors: 4 pieces clock numerals kit includes gold and silver colors, which can be matched and selected according to your favor.
  • With 6 pointers of different styles and lengths and simple and stylish design of the clock hands, so that you are able to choose various ....
Check Stock