Top Quick Detachable Scope Mounts

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles with Integrated Level Bubble | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

CVLIFE 3-9x40 Compact Rifle Scope Crosshair Reticle with Free Mounts for Quick Aiming

  • The scope has a crosshair instead of traditional front sight and gap, and this can obviously increase aiming speed, accuracy..
  • There are two 20mm free mounts with the scope, and the mounts fit all of 20mm rails..
  • The 3-9x40 Scope is made of high-strength aluminum alloy. Completely sealed and 100% nitrogen filled makes it fog and rain proof..
  • The ocular is built with dioptric adjustment lens that can provides nearsighted and farsighted users a clear viewfinder image without the use of....
  • The Scope is only 7.48" (190mm), it is easy to carry and operate. Scratch-resistant coating protects exterior lenses from scratches, oil and dirt..
Check Stock

SNIPER Rifle Scope MT 6.5-20x44AOL with Lock Zero and Adjustment W/e and W Front AOL Red/Green Illumination Mil-dot Reticle. Comes with Extended Sunshade and Heavy Duty Ring Mount and Lens Cover

  • Sniper MT6.5-20x44AOL Hunting Rifle Scope with Illuminated Red and Green Reticle..
  • Premium Multi-Coated Optics for ultimate light transmission, image brightness and clarity..
  • QTA (Quick Turret Adjustment) precision ball bearing turrets for windage and elevation adjustment..
  • CNC Machined, single-piece premium Aircraft-Grade aluminum alloy scope body..
  • Package includes 6.5-20x44 AOL Scope, 3″ Sunshade, Lens Covers, Picatinny Scope Ring Mounts, and Batteries..
Check Stock

Feyachi Brass Catcher Heat Resistant Thickened Nylon Cartridge Casing Shell Catcher Net for Weapon with Picatinny Rail Mount

  • Adjustable Desgin: There are 4 settings on the Pic rail mount and the spring detent adjustment is very handy which allows you to easily adjust the distance of the brass catcher to the ejection port..
  • Low Profile & Quickly Detachable: The mounting piece that goes on the picatinny rail is very low profile and fits easily under the scope. The quick disconnect is easy to use and manipulate..
  • Quality Construction: The thickened nylon ensures it will not melt when ejected. There is a zipper in the bottom of the bag so you can empty it without removing the catcher from your rifle..
  • Larger Opening: 5"x2.75" Opening is quite large and does not interfere with the ejection of the spent brass case. Holds 100 rounds of .223 brass, t can hold a large number of shells before it needs to be emptied. Ideal for reloaders..
  • This Feyachi brass catch is versatile enough to allow for mounting to almost any rifle with a pic rail. Great for anyone reusing brass or wanting to keep outdoor ranges clean. Includes two pic rail mounts for easily and quickly transfer this catcher to another firearm..
Check Stock

Monstrum Slim Profile Series Offset Scope Mount with Integrated Level Bubble | 30 mm Diameter

  • Dual ring scope mount available for standard 1 inch or for 30 mm tube scopes tubes.
  • Scope mounts come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Mounts to any flat top Picatinny rail equipped rifle platform.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
Check Stock

U.S. Rifles, Cal. .30, M1903, M1903A1, M1903A3 and M1903A4: TM 9-1270 Ordnance Maintenance

  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms with integrated level bubble. Comes with both #6 and #8 screws for compatibility with both older and newer Savage Axis models..
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

ohhunt 4x32 Tactical Rifle Scopes Green Fiber Optic Illumination Reticle Scope with QD Mount

  • 4X32mm Compact rifle scopes for hunting ,Multi-coated Lenses Provide Superior Clarity and Light Transmitting Capabilities,Crisp image for accurate shooting..
  • Green fiber 4x32 scope makes use of optic fiber to power up the scope(Battery-free). It absorbs natural light from environment to transfer back to the reticle. Without an electrical illuminator, optic fiber scope provides enhanced longevity and reduces the risk of component failure..
  • Quick Detach mounts are designed to provide the flexibility to easily attach and detach an optic from without any tools .Only use for 20mm weaver rail(Not suitable for Picatinny Rail)..
  • Field of View @ 100 yards:33.0ft(10.06m),Windage & Elevation adjusters 1click @100 yards : 1/2 in,Max - Elevation / Windage (moa):50 (Example: 25 MOA is roughly 25 MOA from center.).
  • 4X Tatical Rifle scopes Shock proof, Fog resistance.Made of Lightweight Aluminum Alloy,Net Weight: 413g,Eyepiece can be Diopter Adjustment..
Check Stock

TRUGLO TRU-Brite 30 Series 1-6 X 24mm Dual-Color Illuminated Power Ring Duplex MIL-DOT Reticle Matte Black Gun Scope with Mount (TG8516TL) and TAC-POD Adjustable Folding Bipod (TG8902S)

  • TRU-BRITE SCOPE - Tru-Brite 30 Series offers the perfect combination of clarity, precision, and speed. Featuring a 30mm tube and 1-6x magnification, TRU-BRITE 30 provides a bright image and extremely wide field of view..
  • ILLUMINATED POWER RING DUPLEX MIL-DOT - This reticle combines Duplex MIL-DOT measuring in the center of the reticle with a thick duplex-style crosshair and illuminated Power ring for quick acquisition in low light or at a low magnification..
  • FEATURES - Each TRU-BRITE 30 scope includes two pre-calibrated BDC turrets in calibers .233 (55 grain) and .308 (168 grain) to engage targets up to 800 yards away. The scope also features generous 4" eye relief and quick-zoom lever included..
  • BIPOD INCLUDED - Lightweight & compact with quick deployment, TAC-POD Adjustable Folding Bipod features spring-assisted design, pivoting base for precision leveling on uneven surfaces and lever lock for quick tension adjustments or complete locking..
  • TAC-POD FEATURES - Mounts to swing swivel stud or Picatinny rail (included).
  • Sling stuf adapter can be used without bipod for additional sling mounting options.
Check Stock

Sig Sauer WHISKEY3 4-12X50mm Scope, 1', SFP - Black + Picatinny Scope Rings (BDC-1 Quadplex Reticle)

  • PRECISION Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! 1 inch in diameter, the rings are built for use with standard 1 inch scope tubes. The Picatinny base is compatible with all Picatinny mounting systems..
  • INCREASES STRENGTH It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting the screws from stripping. These scope rings also features 2 square-integral recoil stops on each ring, which allows us to shave down the weight, while increasing the strength..
  • NO COMPROMISING Now you do not have to compromise when it comes to choosing either versatility or precision. The Monstrum Precision Rings allow you to properly align your scope to your rifle so you have one less thing to worry about..
Check Stock

Monstrum Forester Scope Rings for Marlin 336/1894/1895 Lever Action Rifles | 1 inch Diameter | High Profile

  • Dedicated scope rings built just for the Marlin 336/1894/1895 platform with no additional mounts or adapter necessary.
  • Precision machined from 6061 grade aluminum, the rings attach directly to the factory mounting holes of your Marlin receiver with no additional hardware required.
  • Available in both Medium and High profile center heights..
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Atom Optics 30mm Dovetail Scope Rings for 3/8\ or 11mm Dovetail Rails High Profile Scope Mounts 2PCS

  • 30mm scope rings 11mm Dovetail Rails 2pcs high profile，with allen wrench.
  • 3/8 Dovetail scope rings made of solid aluminum alloy with anodized black matte finish,precision machined.
  • Dovetail scope rings for 3/8" or 11 mm,the ring is for most scopes which are in 30mm scope tube.
  • 11mm Dovetail scope ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with 11mm Dovetail Dimension.
  • High profile scope rings (item height:2"),the height from the center of the scope tube to the picatinny base is 1.33 inches(34mm).
Check Stock