Top Quick Disconnect Couplers For Water

Carbyne Grease Gun Needle Nozzle Adapter 4 inch

  • Perfect to Lubricate in Tight Spaces Such as Universal Joints.
  • Includes Small and Large Quick-Disconnect Adapters to Fit All Standard Couplers.
  • Dispenses a Fine Line of Grease. Use to Inject Grease into Check Ball on Fitting.
  • Maximum Working Pressure: 3,000 PSI. Lifetime Warranty..
Check Stock

QWORK 7 Pcs Disconnect Tool Set, 1/4\-7/8\

  • Labor saving design: the fuel line clip removes fuel lines quickly.
  • Simple: very simple to connect or disconnect fuel injection fuel lines or plugs.
  • Great angle and max width with great performance:push in clips for coolant, fuel, def lines, or for filter removal.
  • A must-have for diesel technicians: works great for quick connect def lines and fuel lines.
  • Tweezers: for replacing the orings that are inside the couplers for the fuel lines.
Check Stock

Tool Daily Pressure Washer Adapter Set, M22 to 3/8 Inch Quick Connect, 3/4 Inch to Quick Disconnect, Male M22 Hose Adapter, 9-Pack

  • ATTENTION: M22 14mm female fitting has 14mm inside plug, If pressure washer needs 15mm, it will cause leakage. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell..
  • 9-pack High power washer quick connect fittings include: 2-pieces Metric M22-14 female to 3/8’’ plug, 2-pieces 3/8’’ quick disconnect to M22 14mm male, 2-pieces 3/4’’ female to 1/2’’ quick connect, 2-pieces 1/2’’ plug to 3/4’’ male, 1-piece M22 14mm male to M22 14mm male..
  • M22 pressure washer quick connect fittings helps pressure washer hose quick connect to pressure washer pump or gun..
  • 3/4″ Garden Hose Quick Connector Sets connect all 3/4″ standard garden hose to water inlet of power washer pump..
  • Pressure washer hose adapter has double M22 14mm male NPT ends. It converts the female M22 fitting of pressure washer hose to male M22 end. All high replacement couplers provide secure fittings and are convenient for frequent connection. Their working Pressure is rated to 5000 PSI..
Check Stock

NBJINGYI Heavy Duty Cast Adjustable Trailer Coupler 2-5/16 in,15000LBS Capacity Channel-Mount Coupler with Hardware Kit

  • Quick and easy to engage. Strong and Secure on the road.
  • Quick to hook up and disconnect .incompliance with SAE standard J684.
  • Desined for utility,horse /livestock ,carge ,and construction trailer applocations.NBJINGYI Couplers are the strongest in the industry..
Check Stock

2 3500lbs Coupler Repair Kit with Chain – Coupler Replacement Latch with Chain 2 ,3500LBS

  • We use a locknut design to make it more rugged and provide double protection..
  • Maximum gross trailer weight: 2000 pounds..
  • Fits couplers with 2", 2 1/2" or 3" channel widths ..
  • The quick release assembly allows for fast and safe locking and unlocking of the ball clamp for convenient hook-up and disconnect..
Check Stock

Bestauto 3/4NPT Hydraulic Quick Connect 3/4body Hydraulic Coupler 20.7MPa Hydraulic Coupling Quick Connect 106L/min Hydraulic Quick Coupler (ISO 16028)

  • ...h-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 3/4" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others..
Check Stock

STYDDI Brass Garden Hose Quick Release Connect Adaptor Fitting, High Flow Solid Brass Water Hose Quick Disconnect Connector Coupler with Male and Female, with 4 Hose Washers - 3 Sets

  • ...they connect. You do not have to twist the hose or wrestle with other unwieldy parts to get the sprinkler to stay flat. Switching between various connections is also with no hassles. This quick screw and unscrew system saves you valuable time and reduces your work also..
  • If you are struggling big time to connect and disconnect the garden hose to different fittings, then this set of garden hose quick connector will make a huge difference. Not only will they save you time in checking for leaks but they can also significantly improve your water usage, turning your outside chores into a relaxing and pleasant experience. Making your life easier with STYDDI brass garden hose quick connect..
Check Stock

Bestauto Hydraulic Quick Connect 1/2 Body with 1/2\ NPT Thread Hydraulic Coupler 4 Pairs Hydraulic Coupling Quick Connect 45.5 L/min Hydraulic Quick Coupler (ISO 16028)

  • ...h-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others..
Check Stock

Bestauto Skid Steer Hydraulic Quick Connect 1/2\ Body Hydraulic Coupler 1/2\ NPT Hydraulic Coupling Quick Connect 2 Pairs Hydraulic Quick Coupler 27.6 MPa (ISO 16028) (2 Pairs)

  • ...h-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged with most types of skid steers loaders, such as Bobcat, John Deere, CAT, Case / New Holland, Kubota, and many others..
Check Stock

Twin-Stack P1IU-A9 2 HP 4 Gallon Portable Air Compressor

  • Portable Design: Lightweight, ergonomic design for easy handling, ideal for DIYers or professionals.
  • User Friendly: Easy to operate front panel and a low 79 dBA noise level provides a superior user experience.
  • Maximum Power and Flexibilty: 100% continuous duty, two quick disconnect couplers enable you to run multiple tools simultaneously.
  • Reliable Operation: All Season Select synthetic lubricant increases efficiency.
  • with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
  • Long-Life: Durable cast iron cylinder, protective back shroud, enclosed frame and extended pump life provide excellent longevity.
Check Stock

3/4\ NPT Skid Steer Flat Face Hydraulic Quick Connect Couplers/Couplings Set w/Dust Caps

  • Our Flat Face Hydraulic Quick Disconnect Coupler & Plug set features a new improved design for high flow performance and maximum service life..
  • 3/4" NPT Thread (see diagram), 1/2" Body, These flat face couplers will couple to most models of skid steers loaders including Bobcat, Case / New Holland, Kubota, and many others.
  • Harden steel construction with Zinc Nickel Plating for Superior Corrosion Resistance.
  • Valve design that allows for a minimal pressure drops and one hand operation.
Check Stock

1/2\ Skid Steer Flat Face Hydraulic Quick Connect Couplers/Couplings Set w/Dust Caps, 2 Sets

  • 2 Sets, These Universal Quick Disconnect Coupler & Plug sets feature a new improved design for high flow performance and maximum service life..
  • 1/2" NPT Thread, 1/2" Body, These flat face couplers interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota, and many others.
  • Heavy Duty Design with 5076 PSI Rating - 23.78 GPM Max Flow Rate.
  • Locking sleeve helps prevent accidental disconnects.
  • Harden steel construction with anti-corrosive plating - Valve design allows for a minimal pressure drops and one hand operation.
Check Stock