Top Quick Disconnect Fittings For Oil Lines
Performance Tool W83159 7/8\ Deluxe Line Disconnect Tool
- For separating quick disconnect fittings on fuel and cooler lines.
- Unique offset design allows for access in confined or obstructed areas.
Check StockPerformance Tool W83153 3/8\ Deluxe Line Disconnect Tool
- For separating quick disconnect fittings on fuel and cooler lines.
- Unique offset design allows for access in confined or obstructed areas.
Check StockPerformance Tool W83152 5/16\ Deluxe Line Disconnect Tool
- For separating quick disconnect fittings on fuel and cooler lines.
- Unique offset design allows for access in confined or obstructed areas.
Check StockPerformance Tool W83158 3/4\ Deluxe Line Disconnect Tool
- For separating quick disconnect fittings on fuel and cooler lines.
- Unique offset design allows for access in confined or obstructed areas.
Check StockLisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool
- Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
- Smallest size also works on automatic adjusting air suspension systems for automobiles.
- Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
- Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
- Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
- Set comes with five popular sizes: 1/8"-5/32.
Check Stock
Hoypeyfiy Air Conditioner and Fuel Line Quick Disconnect Tool Set Standard Sizes for Multiple Applications
- 【What it can do】This product is used to disassemble/disconnect fuel lines, heater lines, AC cooling lines and other quick disconnect fittings. It is simple and convenient to use, saving time and effort..
- 【7 sizes】This product has 7 different sizes of fuel line disconnect tool (diameter): 1/2 1/4 3/4 3/8 5/8 5/16 7/8 inches. It can satisfy most car repairs. If your car is special, you can measure it first before deciding whether to buy it..
- 【How to use】Simple one-handed operation. (For the specific operation, please see the video we uploaded.) The first step: select the fuel line disconnect tool of the appropriate size to be stuck on the pipe. Step 2: According to the direction of the pipe disconnection, push it hard to complete the disassembly..
- 【Material is hard and durable】This fuel pipe removal tool is made of high-quality hard plastic, very hard, not easy to break, wear-resistant and corrosion-resistant..
- 【Friendly service】Our products are shipped from our warehouse in the United States. If the product you received has any quality problems, you can return or exchange it. If you have any questions, please contact me and I will get back to you as soon as possible..
Check Stock
Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg
- 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
- 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
- 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
- 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
- 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock
Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece
- DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
- USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
- Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
- BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
- Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
- INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
- Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check StockUniversal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring
- Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
- Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
- Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
- Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
- Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check StockContinental 63100 Molded Heater Hose
- Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long....
- Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling....
- SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a....
- What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
- Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product,....
Check Stock
1/2\ Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers w Dust Caps,1/2\ NPT Thread+ 1/2 Body Hydraulic Couplers for Skid Steer Bobcat Case/Kubota/New Holland
- The flat face hydraulic couplers with 1/2" NPT thread+ 1/2 body. The hydraulic quick connect coupler is an ISO 16028 flat face style, fits all standard flow skid steers attachments. Impoved design high flow performance and maximum service life..
- The universal hydraulic quick disconnect coupler & plug interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota couplings which made to ISO 16028 standard.
- Applications:This flat face couplers connect used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,construction，industrial hydraulic lines..
- The flat face hydraulic quick connect couplers is valve design and structure for minimize pressure adrops and fluid losses. Sleeve locking mechanism prevents accidental disconnection..
- Our bobcat skid steer hydraulic couplers are made by heavy duty harden steel construction with zinc nickel plating for superior corrosion resistance. 5076 PSI Rating , 12-23 GPM Flow Rate. Warm Tips: Make sure relieve all pressure on the skid steer from the lines before connect/disconnect them.Just line up the flat faced hyd fittings and push couplers to gather,male to female, female to ma....
Check StockABN Fuel Line Disconnect Scissor Tool for 5/16in and 3/8in Vehicle Fuel Lin Compatible with GM, Ford, Mazda
- Practical: Use the ABN Fuel Line Disconnect Scissor Tool for 5/16” Inch and 3/8” Inch GM, Ford, and Mazda Vehicle Fuel Lines for a simple and fast separation of quick disconnect couplings and/or fittings.
- Versatile: Designed for both 5/16” and 3/8” fuel lines.
- Compatible with 1989 and newer GM vehicles, 1990 and newer Ford vehicles, and some 1990 and newer Mazda vehicles.
- Easy to Use: Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job and you can easily pull off the filter.
- Comfortable Grip: Handles have an easy to grasp design that offers a strong grip for maximum torque.
- Durable: All metal construction and design built for strength and longevity.
Check Stock
