Top Quick Release Latch System

3/8 Clevis Slip Hook 4 Pack Forged G70 Steel Clevis Hook with Safety Latch for Deck Hauler Receiver Hitches Trailer Wiring Chain Hooks Solid Clevis Grab Hooks for Trailer 18,000lbs Capacity

  • 【3/8INCH GRADE 70 CLEVIS HOOKS 】Forged steel construction and precision heat treatment which rated for heavy-duty loads up to 18,000 lbs gross trailer weight..
  • 【QUICK RELEASE】This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed..
  • 【HEAVY-DUTY CLEVIS SLIP HOOKS WITH LATH】Ideal for industrial and commercial towing clevis hooks are made of forged G70 high-carbon steel with rust-resistant chromate finish..
  • 【SPRING-LOADED SAFETY LATCH HOOK】 The latch ensures a safe chain connection that the rope, chain, and accessories will not separate from the hook when the load is slack.
  • The clevis hooks with a latch are quipped with a keeper pin, safety latch to easily attach the safety chains from the trailer to the towing vehicle..
  • 【APPLICATION】Our 3/8 inch Clevis Hooks are so heavy-duty, make them easy to use on utility trailers,truck, flatbed trailers, etc.It meets requirements for transport, high-test, and alloy chain..
Check Stock

Woopeey 8 Pcs 1.25 inch Universal Aluminum Vehicle Hood Pins-Quick Release Lock Latch Bumper, License Plate Lock Clip, Push Button Bonnet

  • ... not shake even when drifting or turning, and it will lock the hood firmly when driving on the road or being hit by others. It must be drilled to properly install it on the hood..
  • [ FEATURES ] - Made of high-quality aluminum and stainless steel, not easy to corrode and very durable. Very suitable for car hood, quick release latch suitable for all vehicles. It can be widely used in furniture, cabinets, or any other purpose you can imagine..
  • [ PREMIUM QUALITY ] - Each quick release device will be 100% tested before leaving the factory to ensure product quality and ensure that the latch button works smoothly without hindering the feel..
  • [ INSTALLATION ] - Screw the nut and washer into the screw, put it in the hole of the engine cover, and fix the screw. Apply a little black grease to the top of the screws, close the hood, and press the hood lightly. After opening it, you can see a black dot printed on the screw cover, piercing the black dot. During the punching process, place the button cover on the hole and observe whether the size is appropriate..
  • [ GUARANTEE ] - If the quick release latch has any quality or other problems, please feel free to contact us, we try our best to provide you with a satisfactory solution within 24 hours..
Check Stock

LS2 Helmets Open Face Verso Helmet (Matte Titanium - 3X-Large)

  • Twin Shield System drop down sunshield is operated by a rotary dial switch for smooth and dependable sun protection.
  • Internal sunshield raises automatically when you raise the shield.
  • Secure full metal latch and DOT approved quick-release chin strap is easy to open with a gloved hand.
  • DOT approved. Meets the FMVSS 218 Standard.
  • Easy to operate flow-through ventilation keeps you cool.
Check Stock

LS2 Helmets Open Face Verso Helmet (Matte Black - X-Large)

  • Twin Shield System drop down sunshield is operated by a rotary dial switch for smooth and dependable sun protection.
  • Internal sunshield raises automatically when you raise the shield.
  • Secure full metal latch and DOT approved quick-release chin strap is easy to open with a gloved hand.
  • DOT approved. Meets the FMVSS 218 Standard.
  • Easy to operate flow-through ventilation keeps you cool.
Check Stock

LS2 Helmets Motorcycle & Powersports Helmet's Open Face Verso (Flora Brasil, Small)

  • Twin Shield System drop down sunshield is operated by a rotary dial switch for smooth and dependable sun protection.
  • Internal sunshield raises automatically when you raise the face shield.
  • Secure full metal latch and DOT approved quick-release chin strap is easy to open with a gloved hand.
  • Easy to operate flow-through ventilation keeps you cool.
Check Stock

Truxedo 569101 08- FORD SUPER DUTY SB

  • Signature Low Profile Design - Sitting only 3/4” above the truck bed, Lo Pro doesn’t distract but enhances your truck’s overall appearance..
  • Quick-Release System - The entire cover can be removed in seconds, without tools, providing true 100% full bed access..
  • Automatic Tension Control - Patented design allows the cover to maintain a tight fit and great looks in extreme temperatures and all weather....
  • Industrial Grade Leather Grain - Made of the highest quality material, this tear resistant fabric is constructed to help protect your cargo from the....
  • Simple Operation Anodized single trigger latch requires only one finger to open the cover..
Check Stock

Been Doing Cowboy Stuff All Day Roping Racing Horse Riding T-Shirt

  • DUMMY QUICK LATCH: easy load/remove ground dummy with quick latch.
  • CROSSOVER HOCKS: the most realistic dally and bump training.
  • CORNER SHOT: rotating hips to practice short round shots and rodeo run. DRAGGER MODE: high low leg adjuster. HEAD TRICK: left and right head ducker mode.
  • BAD HANDLE BUNGEE: realistic slow-and-go corner shots and pull back action or QUICK RELEASE RING: for header/heeler true team practice.
Check Stock

YMHHefy Blue Quick Latch Hood Pins 2.44\ Diameter Universal Quick Release Latch Push Button Quick Release Hood Bonnet Pins Lock Clip Kit for Hood Bumper or DIY 2Pcs

  • ... not shake even when drifting or turning, and it will lock the hood firmly when driving on the road or being hit by others. It must be drilled to properly install it on the hood..
  • [ FEATURES ] - Made of high-quality aluminum and stainless steel, not easy to corrode and very durable. Very suitable for car hood, quick release latch suitable for all vehicles. It can be widely used in furniture, cabinets, or any other purpose you can imagine..
  • [ PREMIUM QUALITY ] - Each quick release device will be 100% tested before leaving the factory to ensure product quality and ensure that the latch button works smoothly without hindering the feel..
  • [ INSTALLATION ] - Screw the nut and washer into the screw, put it in the hole of the engine cover, and fix the screw. Apply a little black grease to the top of the screws, close the hood, and press the hood lightly. After opening it, you can see a black dot printed on the screw cover, piercing the black dot. During the punching process, place the button cover on the hole and observe whether the size is appropriate..
  • [ GUARANTEE ] - If the quick release latch has any quality or other problems, please feel free to contact us, we try our best to provide you with a satisfactory solution within 24 hours..
Check Stock

MotoAlliance Impact Implements Pro Landscape Rake w/Tipper Latch for ATV/UTV w/ 2\ Receiver

  • Nineteen (19) replaceable spring steel, 10" tall rake tines.
  • "Quick Pull" Release Latch allows rake to swing back for easy clean out of debris from tines.
  • Easy, one (1) pin mounting with the included pin.
  • Requires Pro 1-Point Lift System, Sleeve Hitch Adapter or CAT-0 hitch (sold separately) for attaching to ATV/UTV and Lawn Tractors.
Check Stock

REDOVANT 10Pack Black Toggle Latch Clamp 300lbs Capacity Adjustable Pull Latch Clamp Metal Quick Release Smoker Door Latch Heavy Duty Toggle Clamps for Lid Jig Tool Boxes Case Black Draw Latch

  • DURABLE BLACK TOGGLE LATCH: Metal pull latch clamp made of high quality galvanized metal material with black coated, rust-resistant and corrosion....
  • Heavy Duty PULL ACTION TOGGLE CLAMP: 300lbs Holding Capacity, stronger than most toggle clamp latch, multipurpose quick latch clamp for cabinet doors,....
  • UNIQUE BLACK PLASTIC HANDLE COVERS: Quick release latch has the oil and stain resistant black plastic cover handle, safe and comfortable operation for....
  • ADJUSTALE TOGGLE CLAMP LATCH: With a adjustable arm design, you can freely adjustable doors closed tightly or loosely as you like.
  • WIDELY RANGE OF USAGE: Pull toggle clamps are widely used for cabinet, door, box, case with no lock or broken handles, perfectly fit for small tools....
Check Stock

OrangeA Step Ladder Folding Cart Dolly 175LBS Hand Truck with Two Wheels (2 in 1 ladder)

  • Step ladder hand truck trolley size: 16″ x 18″ x 42″.
  • Capacity: 400LBS for ladder and 175LBS for hand cart.
  • Lightweight and flat folding 2 in 1 ladder and stepladder.
  • Quick latch system securely holding step ladder cart in an open position.
Check Stock

8Pack Adjustable Toggle Clamp Black Pull Latch Clamp Metal Smoker Door Latch 360lbs Capacity Quick Release Clamp for Boxes Cases Chests

  • 【4001 TYPE DRAW LATCH】Made of high quality carbon steel with black finish, corrosion resistance and rust resistant, ideal small latch clamp for....
  • 【360lbs HOLDING CAPACITY】360lbs holding capacity pull-action latch, stronger than most 4001 latch in the market.
  • 【ADJUSTABLE TOGGLE LATCH】The draw latch has the maximum length is 4-1/8”, and the locking range is 3-1/2 to 4-1/8inch long, tighten the tension....
  • 【EASY TO INSTALL】Just fix the latch and plate on the door with 8# screws, then pull down the handle to close the door.
  • 【WIDE APPLICATIONS】The pull actions latch clamp can hold two sides together tightly, widely used in smoker door, mold cabinet lids, quick release....
Check Stock