Top Racing Exhaust Systems

Typhoon Helmets Snell SA2020 Full Face Racing Helmet (Carbon Fiber, Medium)

  • RACE READY - Perfect full face helmet for auto racing including autocross, dirt track, and drag racing.
  • HANS threaded inserts in shell compatible with HANS head restraint systems.
  • COMFORTABLE - This Snell SA2020 racing helmet offers a plush soft lined interior and rear exhaust vents.
  • Lightweight carbon fiber composite shell.
  • SAFETY - Kevlar chin strap with D-ring closure.
  • fire retardant materials approved and tested by the Snell Memorial Foundation.
  • 3mm optically correct hard coated face shield with eyeport gaskets to keep out dust and debris.
  • SIZE CHART (Circumference of the largest part of your head, usually just above the eyebrows) SMALL 55-56 CM -- 21.7" to 22", MEDIUM 57-58 CM -- 22.5" to 22.8", LARGE 59-60 CM -- 23.2" to 23.6", XL 61-62 CM -- 24' to 24.5", 2XL 63-64 CM -- 24.8" to 25.2", 3XL 64-65 CM 25.2" to 25.6".
  • Please be aware that if you return this item for a refund your order will be refunded less the original shipping charge..
Check Stock

Patriot Exhaust PEC250K-1 Patriot 2.5" Electric Cutout Single System w/remote

  • Perfect for custom header builders, custom shops or do-it-yourselfers.
  • Nonmagnetic stainless steel for high strength racing applications or custom street machine exhaust systems.
Check Stock

Pypes Exhaust HVE11 2-1/2 to 3" Diameter Electric Exhaust Cutout with Wiring Harness

  • Perfect for custom header builders, custom shops or do-it-yourselfers.
  • Nonmagnetic stainless steel for high strength racing applications or custom street machine exhaust systems.
Check Stock

Exhaust Race Rs-4 Full-Sys Ss-Ss-Cf

  • If youre looking for that competitive edge, look no further than our Race Series..
  • These exhaust systems are designed with nothing but power in mind..
  • Each Race Series system is developed in accordance with noise compliance regulations imposed by most racing sanctioning bodies worldwide..
  • All applications are marked with appropriate EPA noise emissions labels.
Check Stock

Lisle 38350 Exhaust Hanger Removal Pliers

  • This tool separates the rubber supports from exhaust hanger brackets..
  • The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
  • The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
  • The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
Check Stock

Yoshimura 05-06 Kawasaki ZX636 RS-5 Slip-On Exhaust (Street/Carbon Fiber)

  • The RS-5 is one of Yoshimura’s most popular pipes, and for good reason..
  • Its trapezoidal shape appeals to the eye and really captures the spirit of racing..
  • It also complements the look of any sportbike, following the race-inspired lines of today’s under-tail muffler configurations..
  • The RS-5 features a straight baffle with a removable low-volume insert, and trick carbon fiber cone-shaped end cap.Trapezoid-shaped sleeve.Large volume of packing material.Straight baffle for ample flow.Carbon fiber end-cap.Stainless steel tail-pipe.Step-.
  • These exhaust systems are designed with nothing but power in mind..
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • ...our build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cylinder Body BBR Tuning Racing Series 6 Flap Reed Assembly BBR Tuning 21mm OKO High Performance Carburetor Manifold 1x Racing Air Filter 1x Angled throttle cable retainer ....
Check Stock

Two Brothers Racing S1R Black Series Slip-On Exhaust 005-3860407-S1B

  • The S1R exhaust is a state-of-the-art product from Two Brothers Racing..
  • The system features an T6 aluminum or carbon fiber canister highlighted by a natural finished aluminum outlet and stamped spring-mounted inlet for ultimate durability.The S1R exhaust from Two Brothers Racing showcases a race design while increasing all-ar.
  • The carbon fabric is made with a 33 million modulus carbon tow then impregnated with the high-temperature resin under very tight tolerances.Note: Two Brothers Racing Products are for closed course competition use ONLY..
Check Stock

18-19 Kawasaki EX400ABS: Two Brothers S1R Black Series Slip-On Exhaust (Aluminum)

  • The S1R exhaust is a state-of-the-art product from Two Brothers Racing..
  • The system features an T6 aluminum or carbon fiber canister highlighted by a natural finished aluminum outlet and stamped spring-mounted inlet for ultimate durability.The S1R exhaust from Two Brothers Racing showcases a race design while increasing all-ar.
  • The carbon fabric is made with a 33 million modulus carbon tow then impregnated with the high-temperature resin under very tight tolerances.Note: Two Brothers Racing Products are for closed course competition use ONLY..
  • Not intended for street use.Note: O.E.M..
Check Stock

51mm Motorcycle Exhaust Pipe Muffler Silencer, Universal Stainless Steel DB Killer Noise Eliminator Sound Eliminator For Most of Motorcycle

  • 【Lower Noise Muffler】This muffler can effectively reduces DB sound levels from louder exhaust systems..
  • 【High Performance】This exhaust pipe is crafted by professional manufacturer. The new motorcycle exhaust pipe which makes the exhaust smoother and improve the power.Effectively reduces DB sound levels from louder aftermarket exhaust systems. Fashion design style, a great accessory to dress up your rides..
  • 【Good Quality】This exhaust pipe is made of high grade stainless steel,it is of high temperature, superior longevity, strong practicability and durable in use..
  • 【Good Looking】Exquisite workmanship and fashionable design, it will enhance the look of your motorcycle.Exquisite workmanship and fashionable design will enhance the look of your motorcycle..
  • 【Fitment】This is a universal removable Exhaust Pipe Muffler Insert DB Killer with premium quality. The muffer silencer is fit for the most motorcycles with 51mm diameter models..
Check Stock

2 Bottles of New BG 44K Platinum

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

2PCS Car Exhaust Rubber Muffler Hanger, 2 Holes 11mm (0.43inch), Universal Muffler Bracket Mount, Exhaust High Density Rubber Insulator Muffler Hanger (Black)

  • Universal Accessory: This rubber exhaust hanger fits most cars that use an easily replaceable hanger system and consists of two holes and a rubber lined insulator bracket. Please be sure to check the size and distance of the hooks before use to ensure the product is suitable for use..
  • High quality rubber: The exhaust pipe insulator hanger is made of high quality, high density rubber. It is heat resistant and durable for long term use. This is a standard automotive part used to replace exhaust systems..
  • Depth: 20mm (0.8") Hole diameter. 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, Jeeps and SUVs. Please make sure to measure the size before purchase to avoid improper use..
  • Installation: First use the exhaust hanger removal tool to remove the muffler hanger from the exhaust system. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the exhaust pipe mounting pegs..
  • What you will get: 2 x rubber exhaust hanger, this rubber exhaust hanger is essential to effectively reduce the sound generated by rocking and hitting the car body, reduce the height and contact surface of the exhaust pipe with th....
Check Stock