Top Radial Load Collars

OAV Air Bearings OAV006MB Air Bushing, 6 millimeters

• Input Pressure .41 Mpa to .68 Mpa (60 to 100 PSI).
• Radial Stiffness 2 N/μ m (0.01 lbs/μ in).
• Pitch Moment Max 0.013 N-m (.125 lbs-in).

SUPERMAX TM-1 All-Season Radial Tire - 235/70R16 106T

GrowBright OctoCloner 8-Site Aeroponic Cloning/Propagation System

• Complete 8-site aeroponic cloning machine.
• Includes: 5-gallon black bucket reservoir, factory-molded 8-site lid, (8) radial-punch neoprene collars, larger 250 GPH pump, manifold stem, (2) 365° rotary sprayers.
• Electrical (submersible pump): 28 watts, .23 apms @120v.
• Comes with full instructions including 'how-to-cut-clones guide' and 'tips for success'.
• Assembled system measures: 14-1/4" Tall x 12" Wide.

RNU205E Cylindrical Roller Bearing Harley Davidson 9135 Inner Primary Mainshaft

• SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
• Metric unit measurements for industry consistency.
• Single row roller bearing for high radial loads with low friction.
• Removable inner ring in open bearing allows for lubrication in place.

Tusk Racing TERRABITE Heavy Duty 8-Ply DOT Radial UTV/ATV Tire - 27x9-14

• DOT test standard compliant (FMVSS 571.119) at max operating pressure. Radial, 8 ply rated construction. Truck style tread for smooth ride on hard....
• Construction type: Radial 8-Ply DOT Approved.

Four 4 Tusk TERRABITE Heavy Duty 8 Ply Radial UTV/ATV Tires - 28x10-14

• Includes Four 28x10-14 Tusk Terrabite Radial 8 ply tires..
• Radial, 8 Ply Rated Construction. Truck style tread for smooth ride on hard surfaces. Excellent off road performance. High load ratings for today’s....
• Please Note: The Terrabite can run slightly small for its size..

SKF 22207 E/C3 Spherical Roller Bearing

• Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads.
• Machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
• P5 precision outer ring with center lubrication groove and oil holes.
• C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor.
• Straight bore fits conventional cylindrical shafts.

ST235/80R16 23580R16 Radial Trailer Tire with 16x6 inch Wheel, 8 Lug 6.5" Center,10-ply Load Range E, 2 Pack

• ...idewall and/or trailer owner's manual to determine the appropriate tire size and load capacity for your application.If you have any questions or concerns,please contact us timely!.
• Trailer tire couples the strength of a bias tire with the durability and stability of a radial tire, created specifically for trailers and not intended for use on other vehicles..
• The unique makeup of a radial trailer tire entails an inner steel belt layer that runs at a 90-degree angle from the tread center line. Radials offer much less rolling resistance than their bias ply counterparts, which means they dissipate heat more effectively and as a result, the tread lasts longer. Their low rolling resistance also lends itself to better fuel economy..

Bones Big Balls Reds Skateboard Bearings 8 Pack

• 50 PCS 608-2RS C3 bearings 8x22x7mm, rubber sealed deep groove.
• Precision grade ABEC-1, max rpm 34000 with grease. Pre-lubricated with grease, less friction, no maintenance needed.
• Single-row radial ball bearing for applications that support radial and axial loads.
• Easily removed and reinstalled.Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power tool ect. in many other rolling applications.
• Material:Carbon steel. These brand new bearings come directly from factory and fully tested..

Boston Gear LHB12 Self-Aligning Ball Bearing, Spherical, Precision, 0.750\ Bore, Aluminum Bronze

• Self-aligning bearing for applications using linkages for accommodating misalignment under heavy radial or thrust loads.
• Heat-treated SAE 52100 steel-plated balls for resistance to corrosion and wear.
• Aluminum bronze housing for resistance to corrosion.
• Lubrication groove on OD for durability and efficiency.
• Maximum static radial load of 30,000 lbs.

SKF 6307 TN9/C3 Radial Bearing Single Row Deep Groove Design ABEC 1 Precision Open C3 Clearance Plastic Cage 35mm Bore 80mm OD 21mm Width

• Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy.
• Conforms to ABEC 1 precision standard for performance within a narrow range of variation.
• Deep grooves support heavier loads than standard grooves and keep balls stable at high speeds.
• C3 radial internal clearance for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion.
• Plastic cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise.

Loadable Dumbbell Pair / 20 inch Dumbbell w/ 6 inch Olympic Handle

• Load up to 220lbs on each dumbbell handle..
• Can fit regular barbell collars with 2 inch diameter..
• Loadable dumbbells come equipped with bearing collars, great for quick movements from floor to overheard. A feature you cannot get with regular....
• The shaft has knurling to give you a better grip when you load this bad boy up. Not too aggressive or passive..
• Want to take your workout on the go? Grab a resistance band and your loadable dumbbell and you can have a great portable workout..