Top Radial Mount Motors

Trane SF AC Condenser Motor - 1/4 HP - 208/230 Volts - 1075 RPM – 48Y Frame - SFMC251SP2V - Replaces Emerson 1860 – A O Smith FSE1026S - GE 3728 - Fasco D909

  • Trane Condenser Motors are designed to survive in harsh environmental conditions, rugged designed and field tested by the engineers and technicians. A reliable condenser motors for air conditioner that can last years to serve you..
  • Trane AC Condenser Motors are UL approved for USA and Canadian market and Class “B” insulated..
  • Trane Air-Conditioner Condenser motors are High Efficiency, Low Power Consumption, Continuous Duty, Contained Air Over, Thermally Protected, Reversible Rotation, Suitable for 48Y Frame mounting brackets, mount in any direction, Shaft Size: 1/2 Inch Diameter x 5 Inch Long..
  • Trane Condenser Motor for air conditioner replaces other brands condenser motors: - Emerson 1860 - AO Smith FSE1026S - Fasco D909 - GE Regal Beloit 3728.
  • Trane Air-Conditioning name stands behind the quality, reliability and superior performance of these Condenser motors. Buy the best, buy Trane AC Condenser motors.
Check Stock

Mophorn 3HP Dust Collector with 2800 CFM Air Flow Bag Dust Collector 110V Portable Dust Collector 5 Micron Bag Filtration

  • Motor Size: The wall mount dust collector features with 3 horsepower motor voltages of 110V, single phase, 3450RPM.
  • Air Flow: With 2800 CFM air flow, this portable dust collector is more effective than many big stationary units.
  • Bag Filtration: The wall mount dust collector includes 5-micron bag with built-in window to view dust level, featuring the impeller of 12" balanced steel radial.
  • Wall Mounting: The wall mount dust collector features with wall mounting or ground position to fit your job needs.
  • Continuous Use: Fan Cooler motor is designed for long, continuous use of the wall mount dust collector.
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Minn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black

  • Designed to meet the increased stress created by high thrust motors and long shaft lengths.
  • Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
  • Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
  • Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
  • Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock

Super Antenna MC2 SuperPlexer 2 Meter VHF Adapter for MP1 Series HAM Antenna HF Portable Amateur Radio

  • POWER RATING: 500W SSB, 300W CW/DATA. SIZE: 20.0"x1.25"x1.25" (15x32x32cm). COLOR: Stealth Black and Metallic. WEIGHT: 12 ounces (200g)..
  • FITTINGS: 3/8-24 standard threads, male fitting on bottom, and male fitting on top of diplexer. CONTENTS OF PACKAGE: 1 MC2 SUPERPLEXER, 1 ER2 EXTENSION ROD, 1 MR2B RADIAL SET, 1 MR2R RADIAL SET, 1 MR2Y RADIAL SET. Note: This is only a 2 meter adapter..
Check Stock

Osborn HPC-50 Load Runner, Plain , Concentric Stud, 50.00 mm Roller Diameter, 40.00 mm Roller Width, 16.00 mm Stud Diameter, 50.00 mm Stud Length, Ball Bearings, Metric

  • It particularly suitable for the occasions when the radial space is limited. Widely used in motors, aerospace, automobile manufacturing, CNC, mechanical engineering, etc..
  • Made of high grade bearing steel, temperature-resistant, durable, not be easily damaged for a long working life..
Check Stock

Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat

  • MORE CONTROL – Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off.
  • UNIVERSAL MOUNT – Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor.
  • EASY INSTALLATION – Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs.
  • BOW MOUNT – Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder.
Check Stock

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

SKF F2B 100-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1\ Bore, 3-7/8\ Bolt Hole Spacing, 3150lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

B&P Lamp® Tapered Brass Knob

  • Great for use with straight shaft motors to hold buffs.
Check Stock

SKF F2B 108-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1-1/2\ Bore, 5-21/32\ Bolt Hole Spacing, 6900lbf Dynamic Load Capacity

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular.
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals on both sides of the bearing keep lubricant in and contaminants out.
Check Stock

Sea Eagle SE9 11-Foot Motormount Inflatable Boat

  • Inflatable motor-mount boat with room for up to 5 people.
  • 38mm Polykrylar construction is puncture- and tear-resistant.
  • inflatable floor is compatible with optional floorboards.
  • Supports 3-horsepower gas motors or up to 74-pound electric thrust motors.
Check Stock