Top Radial Spherical Plain Bearings

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

［10 Pack］ 608 2RS Ball Bearings – Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings for Skateboards, Inline Skates, Scooters (8mm x 22mm x 7mm)

  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions..
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on..
  • With small friction and high-limit speed : 34000.00 rpm, SHKIBY Deep Groove Ball Bearings are cost-effective and require little maintenance..
  • Pack of 10 pcs 608-2RS steel ball bearings (8x22x7mm), double-rubber sealed deep groove..
  • This 608 2RS shielded 8x22x7 miniature ball bearing is a single-row bearings for supporting radial loads. The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads, and is Shields on both sides keeping lubricant in and contaminants out..
Check Stock

FK Bearings WSSX16T Spherical Bearing with Teflon, 1\ (1-3/8 Wide), 1 Pack

  • Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
  • Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

Bones Big Balls Reds Skateboard Bearings 8 Pack

  • 50 PCS 608-2RS C3 bearings 8x22x7mm, rubber sealed deep groove.
  • Precision grade ABEC-1, max rpm 34000 with grease. Pre-lubricated with grease, less friction, no maintenance needed.
  • Single-row radial ball bearing for applications that support radial and axial loads.
  • Easily removed and reinstalled.Ideal for moderate load uses: skateboards, Inline skates, scooters, inline blade electric motors, wheels of bicycle, motorcycle, electric hand power tool ect. in many other rolling applications.
  • Material:Carbon steel. These brand new bearings come directly from factory and fully tested..
Check Stock

22208-E1-XL-C3 FAG Spherical Roller Bearing 40,00x80,00x23,00mm

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
  • Straight bore for fitting to a conventional cylindrical shaft.
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.
Check Stock

FK Bearings COM12T 3/4 Spherical Bearing with Teflon Commercial Series, 1 Pack

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft.
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.
Check Stock

HIC 22310 Spherical Roller Bearing, 22310RW33FY HIC Roller Bearing, 50MM Straight Bore, 110MM Outside Diameter

  • Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads.
  • Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

VOLV Precision 10 Qty 608ZZ 8x22x7 Double Metal Shielded Ball Bearings| Pre Lubricated

  • 8mm inner dimension, 22mm outer dimension, and 7mm width.
Check Stock

INA NATR15 Bearing Track Roller, 35X18X15 MM

  • Track roller with needle bearings supports high static and dynamic loads in track-type applications.
  • Full complement of bearings for higher radial load capacity than caged bearings.
  • Yoke-type rollers for use with heavier loads or where clevis mounting is preferred.
  • Thick outer ring helps minimize deformation under bending stresses.
  • Rubber seals to retain lubricant and for protection against contaminants.
Check Stock

20 Pack Fidget Spinner Bearing and Cap Replacement Set, Chrome Steel Bearing Balls, High Speed 13mmx7mmx4mm Bearings Single Sealed Small Bearings for Fidget Spinner

  • ...of high-quality stainless steel and plastic for durability and resistance to deformity under heavy loads. Inner and outer races are machine polished for smooth, high-speed rolling. This bearing provides higher speeds, precision, and durability, reducing replacement and maintenance costs..
  • [Radial Ball Bearing] MR137 bearings are sealed on one side to protect against contaminants like dust and water out of the apparatus and retain lubrication. Stainless steel races ensure durability and corrosion resistance. Single-row radial ball bearing for applications that support radial and axial loads..
  • [Spinner Cap & Wide Application] Caps made with ABS plastic are lightweight but durable, compatible with MR137 bearings. Easy to install and uninstall the two components. This bearing set can be used in a wide variety of applications, including fidget spinner creation, replacement, and more DIY projects, perfect for fidget spinner frame replacement when your original caps/bearings are lost. You could also DIY your unique fidget spinner with this bearing set..
  • [Safety Disclaimer] We do not accept any responsibility or liability for misuse of this product. All our products are extensively tested to comply with rigorous and stick QC standards. We recommend proper super....
Check Stock

16 Pack Fidget Spinner Bearing and Cap Replacement Set, Chrome Steel Bearing Balls, High Speed 13mmx7mmx4mm Bearings Single Sealed Small Bearings for Fidget Spinner

  • ...of high-quality stainless steel and plastic for durability and resistance to deformity under heavy loads. Inner and outer races are machine polished for smooth, high-speed rolling. This bearing provides higher speeds, precision, and durability, reducing replacement and maintenance costs..
  • [Radial Ball Bearing] MR137 bearings are sealed on one side to protect against contaminants like dust and water out of the apparatus and retain lubrication. Stainless steel races ensure durability and corrosion resistance. Single-row radial ball bearing for applications that support radial and axial loads..
  • [Spinner Cap & Wide Application] Caps made with ABS plastic are lightweight but durable, compatible with MR137 bearings. Easy to install and uninstall the two components. This bearing set can be used in a wide variety of applications, including fidget spinner creation, replacement, and more DIY projects, perfect for fidget spinner frame replacement when your original caps/bearings are lost. You could also DIY your unique fidget spinner with this bearing set..
  • [Safety Disclaimer] We do not accept any responsibility or liability for misuse of this product. All our products are extensively tested to comply with rigorous and stick QC standards. We recommend proper super....
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock