Top Radiator Hose Air Intake

gulrear Sliding Door air Conditioner kit with Dual Hose,Adjustable Length from 20" to 87" Suitable for 5.9" Diameter Exhaust and 5.0" Intake Dual Hose Portable AC Sliding Glass Door Vent Kit

  • 【Designed for Specific Dual Hose Portable Air Conditioners】This Plastic Sliding door Seal Panels kit Design Compatible with a Dual Hose Portable Air Conditioner 5.9 inch Diameter Exhaust and 5.0 inch intake hose - Great Alternative to Factory Default kit Included with Your Dual Hose AC.
  • 【Great for Tall Sliding Windows Not Just Sliding Doors】Slide Door Vent Kit Consists Of Four Plates, Total 256cm/101Inch Length, Max Adjustable Length 220cm/87Inch, Be Satisfied With The Needs Of Different Sliding Door Heights.Slotting the Plates Together toThe Desired Length of Your Chosen Door - You Don't Need to Use All Four Plates if it's Not Necessary..
  • 【Easy set-up】 This kit was easy to extend to my window needs,Easy to install. Make sure you do your measurements before buying. These panels are easy to adjust with the slider nuts.The AC Door seal kit can be shortened or lengthened for the Desired fit And works with both vertical and horizontal sash windows. Installation couldn't be easier - simply slot, slide and lock into place!sliding door air conditioner kit is the perfect solution for efficient use of your AC unit..
Check Stock

Air Cleaner Intake Hose Tube with Clamps for 2007-2013 Nissan Altima 2.5L 4 Cylinder Engine 16576-JA000

  • 【OE#】16576-JA000.【Replace OE#】696-085. Replace your broken air intake hose, easy to install, would be restore drive-ability and fuel economy. Package included: Air intake hose x1, clamps x3..
  • 【Compatible with】For Nissan Altima 2007-2013. Please check your vehicle in the Amazon Fitment Filter System in the top left corner. Compatibility information provided is for reference only. Please make sure to match the exact part numbers between this part and the part that you are replacing..
  • 【Function】Air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects the air filter box and the intake manifold. The intake hose cracks, chips, or breaks can develop cracks and holes which can result in a check engine light (CEL), poor fuel economy, and hesitation during acceleration, under these circumstances, you need replace it timely!.
  • 【High-quality】Made of rubber materials that contain the component of high-tenacity fibre, have more enhance antioxidant and anti-aging, fully resist cracking caused by drying and prevent soften from high temperature. While thi....
Check Stock

OTC Water Pump Holding Tool

  • Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps..
  • Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21" long rubber hose, brass parts, anti-corrosion and durability. 3" large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak..
  • Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other dam....
Check Stock

A-Premium Air Flow Meter Boot Intake Hose Tube to Throttle Body Replacement for BMW E46 323i 323Ci 325i 325Ci 328i 1999-2006 Z3

  • 【Vehicle Fitment】Compatible with BMW (E46 Series) 320i 2001-2005 2.2L, 323Ci 2000 2.5L, 323i 1999-2000 2.5L, 323i 2006 2.5L, 325Ci 2001-2006 2.5L, 325i/325xi 2001-2005 2.5L, 325xi 2006 3.0L, 328i 1999-2000 2.8L, (E36 Series) Z3 2000 2.0L, 2001-2002 2.2L, 1997-2000 2.8L.
  • 【Specification】With 1PC Black Air Intake Hose (Inside Diameter 3 inch, Length for 8 inch and Outside Diameter 3 inch).
  • End 1 Shape for Molded Assembly, Shape for Molded Assembly and Material for Rubber.
  • 【Buy with Confidence】Our air intake hoses are made of rubber materials that contain the component of high-tenacity fibre. With the high quality and reliable of performnace that not only enhance antioxidant and anti-aging, but also fully resist cracking caused by drying and prevent soften from high temperature..
  • 【Importance of Parts】The air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects the air filter box and the intake manifold. As you checking engine light (CEL), poor fuel economy and hesitation during acceleration maybe caused by your air intake hose develops cracks or small holes, under these circumstances, you need replace it timely..
  • 【Reference Number】(Make sure this part fits your vehicle exactly....
Check Stock

TomGoo Universal 1L Radiator Coolant Overflow Tank,Recovery Coolant Bottle,Polished Aluminum(Silver)

  • ...Level Indicator.Two Barbed Hose Connector, Two Plugs And Liquid Level Indicator Are Pre-installed On The Product, Which Can Be Used Directly. This Coolant Overflow Tank Universal Fit For Most Car,Additional Accessories Can Help You Modify The Overflow Bottle To Fit Your Car!.
  • 【How To Work】When The Coolant In The Radiator Expands During Heating And The Pressure In The radiator Exceeds The Design Pressure Of The Radiator Cap, The Coolant Will Flow Into The Radiator Overflow Tank Through The Overflow Port. When The Radiator Cools Down, A Vacuum Is Created And Fluid Is Drawn From The Coolant Recycling Box Back To The Coolant Recover Tank!.
  • 【Advantage】Coolant Overflow Tank Made Of 6061 Aluminum For Enhanced Strength, Anodized Polished And Durable, Better Than Plastic Material。Radiator Coolant Overflow Tank Tight Closed Cap, Fully Tig Welded And Thread Come With O-Ring Gasket, Keep A Good Closed Environment And Prevent Coolant Leakage.Magnetic Drain Plug At The Bottom For Easy Draining And Cleaning..
  • 【High Performance】Catch The Overflow Coolant From The Radiator And Store. Due To The Way Coolant And The Radiator Works, The Air Is Sucked Into The Radiator Instead Of Coolant Which Results In The Formation Of Rust. Install Overflow Bottle For Radia....
Check Stock

AP A-Premium Engine Air Cleaner Intake Hose Tube Replacement for Honda Accord 2003-2007 V6 3.0L Only Acura TL 2004-2006 V6 3.2L

  • 【Vehicle Fitment】Compatible with Acura TL Base 2004-2006 3.2L Sedan.
  • Compatible with Honda Accord EX 3.0L, LX 2003-2007 Coupe & Sedan, SE 2005....
  • 【Specification】With 1PC Air Intake Hose---(Inside Diameter: 2.8 inch.
  • 【Buy with Confidence】OE replacement Air Intake Hose, easy to install. It is made of rubber materials that contain the component of high-tenacity....
  • 【Importance of Parts】The air intake hose plays an important parts that fixes between air intake box and throttle body on vehicle, which connects....
  • 【Reference Number】(Make sure this part fits your vehicle exactly) OEM Part Number: 17228-RCA-A00, 17228RCAA00, 696-001.
Check Stock

Akozon Air Turbonator, Car Air Intake Double Fan Turbine Charger Fuel Saver Turbo Charger(Red)

  • Professional Design : The fan blades of this air intake turbonator are designed with a professional angle to enhance the gas flow rate. Double-sided 10-blade prfor Opellers allow the turbine to deliver super-large output.
  • Energy Saving : Exquisite craftsmanship and high performance,use this fuel saver turbonator could save about 5%-15% of fuel for your vehicle..
  • Aluminum Alloy Material : The pick-up piece is made of high-strength aluminum alloy, which has durability, corrosion proof, non-deformation, light weight but high hardness, allows to withstand slight collision.And will not be deformed due to long-term use..
  • Installation instructions: The power acceleration system turbo is installed in the intake hose between the original car bellows and the throttle va e. When installing, the thickness of the rubber collar should be configured according to the diameter of the original car's intake hose..
  • Work Principle : When the engine is normally started, the turbonator could take advantage of natural intake of the engine to drive the fan to rotate at a high speed. While rotating, a large....
Check Stock

Air Intake Cleaner Hose REPLACES# 25783713 Fits for 2009 2010 2011 Buick Enclave Chevy Traverse GMC Acadia Saturn Outlook Intake Boot Tube Outlet Duct

  • REPLACEMENT Air Intake Hose -Replace your broken air intake hose on your vehicle and restore drive-ability and fuel economy..
  • FITMENT - 2009 2010 2011 Buick Enclave, 2009 2010 2011 Chevy Traverse, 2009 2010 2011 GMC Acadia, 2009 2010 Saturn Outlook.
  • HIGH QUALITY - Made of High Quality & Durable Material.Tested & certified to meet or exceed OEM quality standards.The price is only a small part of....
  • WARRANTY - This air intake hose comes complete with 2 years warranty. Worry-Free Return And Refund Policy, Buy with Confidence!.
Check Stock

WYNNsky 10FT Vacuum Tubing Hose, 0.12'' (3MM) ID, 0.27'' (7MM) OD, High Temperature Silicone Material, -76℉ to 374℉, 60PSI Max Working Pressure Automotive Replacement Vacuum Hose

  • Application: WYNNsky vacuum hoses are quite an inexpensive and practical performance modification for most all types of vehicles..
  • Material: Manufactured from a high-grade silicone, these vacuum hoses facilitate superior temperature resistance, will last longer than rubber hoses, and won't deform, even under extreme conditions..
  • High Temperature: WYNNsky silicone vacuum hoses are ideal for cooling/heating and high-power forced induction applications. -76℉ to 374℉..
  • Hose Standard: 0.12'' (3MM) ID, 0.27'' (7MM) OD, 2MM wall thickness, 60 PSI Maximum pressure rating..
  • This silicone vacuum hose applies to general purpose air or water transportation in the engine bay, great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system..
Check Stock

X AUTOHAUX 17228-RAC-U00 Engine Air Intake Tube Hose Pipe Rubber for Honda CM4 2003-2007

  • Fitment: for Honda CM4 2003-2007, for Honda Accord 2003-2005..
  • Air Intake Hose: The air intake hose is mounted between air intake box and throttle body on your vehicle..
  • Made of material of rubber that is endurable for your car engine..
  • Easy to use: Direct clamp on your car, easy installation..
Check Stock

ACDelco Professional 26263 Molded Turbocharger Intercooler Hose with Clamps

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone.
  • Min temperature: -60 C/-140 F. Max temperature: 230 C/428 F. Bursting pressure: 2MPA.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Great for marine and industrial use perfect use with Turbocharger, Supercharger, DIY Intake, radiator cooling system and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Meet and exceed Saej20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications.
  • Inner Diameter: 3.5"-4" (89mm-102mm). Leg Length: 4.5"X4.5". Wall Thickness: 5mm . We Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

Duokon Air Intake Turbo Fan, Auto Car Turbonator Dual Fan Turbine Super Charger Gas Fuel Saver Turbo Replacement(Black)

  • Professional Design : The fan blades of this air intake turbonator are designed with a professional angle to enhance the gas flow rate. Double-sided 10-blade prfor Opellers allow the turbine to deliver super-large output.
  • Energy Saving : Exquisite craftsmanship and high performance,use this fuel saver turbonator could save about 5%-15% of fuel for your vehicle..
  • Aluminum Alloy Material : The pick-up piece is made of high-strength aluminum alloy, which has the greatest durability, corrosion proof, non-deformation, light weight but high hardness, allows to withstand slight collision.And will not be deformed due to long-term use..
  • Installation instructions: The power acceleration system turbo is installed in the intake hose between the original car bellows and the throttle valve. When installing, the thickness of the rubber collar should be configured according to the diameter of the original car's intake hose..
  • Work Principle : When the engine is normally started, the turbonator could take advantage of natural intake of the engine to drive the fan to rotate at a high speed. While rotating, a large amount of fresh air driven in engine is forced to produce eddy. Make rotating air mix with the fuel injected from the injector, make the air density in the intak....
Check Stock