Top Radiator Sleak 2

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

Marame 100mm x 100mm 4mm Thinkness GPU CPU Heatsink Cooling Thermal Conductive Silicone Pad

  • ...lectrical appliance industry. Electronic product heating device, electronic heating module, power supply heating body, LCD TV and computer peripheral RDRAMTM, CD-ROM, CPU, IGPT module and so on, and any equipment needing to be filled with heat dissipation.
  • Use guide: 1.remove the old heat-conducting products of the radiator,and clean the surface of dirt and oil stains. 2.Determine the contact position of the chip and the radiator on the radiator, and cut the appropriate size. 3.Tear off the protective film on one side of the conductive silicone sheet Paste to the fixed radiator position.4.And then tear off the other side of the protective film.5.After installation to the radiator to exert certain pressure to make it close to the radiator surface.
Check Stock

High Pressure Radiator Cap with Temperature Gauge, 1.8 Bar Radiator Cap 25.6psi Compatible with Honda, Kawasaki, Suzuki, Yamaha, Polaris Ranger, Husqvarna Dirt Bike, KTM, More Motorcycle ATV Models

  • REPLACEMENT 1.8 HIGH PRESSURE RADIATOR CAP : Accurate read out in Celsius and Fahrenheit - This high-pressure radiator cap will give you real-time temperature monitoring with accurate readings in both Celsius and Fahrenheit (32-400). It has a bright color gradient meter that provides high visibility to assist you in understanding what the temperature of your engine means, and can help prevent costly engine overheating..
  • COMPATIBLE WITH THESE VEHICLES : Honda CR125R, CRF250R, CRF250X, CRF450R, XR650R | kawasaki KLR650, KX250, KX250F, KX450, KX450F, KX65 | Suzuki DR-Z400, DR-Z400S, DR-Z400SM, RM250, RMZ250, SV650 | Yamaha Banshee 350, Rhino 450 660 700, WR400F, WR450F, YZ400F, YZ450F, YZ450Z | Polaris Ranger, Does Not Fit RZR Models | KTM 250, 300, 350, 450, 500 & more vehicles 1.8 bar high pressure radiator cap. Please check the detailed description before purchase. Thank you!.
  • REPLACES PART # : 1.8 high pressure radiator cap. This 1.8 High Pressure Radiator Cap with Temperature Gauge makes it easy to keep an eye on your machine's temperature. Our innovative design gives you the benefits of a standard radiator with temperature monitoring on your 2 or 4 strok....
Check Stock

Motorcycle Radiator Shroud Body Plastic ABS For CRF230F 2020 Dirt Bike Red

  • FITMENT - This motorcycle radiator shroud fit for CRF230F 2020 dirt bike..
  • ABS PLASTIC - motorcycle radiator shroud is made of high-quality ABS plastic, which is light but tough, not easy to wear and break, and has a long service life.Manufacturing processes are so highly refined, every durable glass polypropylene (DGP) body panel that rolls off the line has consistent strength, wear, and color..
  • FUNCTION - It can protect your motorcycle and replace your original parts.So that you can ride with confidence in any situation.Heat-shield technology adopted.Good quality!Highly recommend you to buy this motorcycle radiator shroud..
  • BEAUTIFUL COLORS - This motorcycle radiator shroud have brilliant colors and the surface is polished. Make your motorcycle look like new.Pre-drilled mounting holes, an accurate shape, and matching factory colors round out every set of plastics for a finished appearance.Get the same cool looks at such great prices!.
  • PACKAGE INCLUDES - 2 pcs * motorcycle radiator shroud as pictures..
Check Stock

LCGP 800ml Cooling Catch Bottle Aluminum Radiator Coolant Tank Black Overflow Oil Catch Tank for Universal Car

  • OVERFLOW OIL CATCH TANK: Improve the cooling efficiency of the water tank. Save the cooling systems of your car. And keep the engine within the operational temperatures to improves its performance..
  • MATERIAL&SIZE: The radiator coolant tank is made of high quality T6061 aluminum, and anodized polished. These make the radiator coolant tank more durable and anti-corrosive. And the volume of the cooling catch bottle is 800ml, height 8.27”, bottom diameter is 2.96”, the length of hose is 39.37”..
  • Application: Our coolant overflow tank bottle can fit for most vehicle. It’s used in the cooling system of your car to save the cooling system from rust. Also protects the necessary components from oil..
  • WORKING PRINCIPLE: When the engine works, the coolant in the radiator will sealed through the pressure cap and flows through the hose into our cooling catch bottle. And when the radiator cools, the coolant in the cooling catch bottle recycle back into the radiator..
  • INSTALL AND WARRANTY: Install the bottle in the car’s pipe, away from the heat source, connect the bottle to the radiator with a hose. We provide this overflow oil catch tank have 1-year warranty. Our customer service will try our best to help you..
Check Stock

48" Chrome Stainless Steel Radiator Hose Kit, Flexible Radiator Hose Kit, with 4pcs Chrome Caps

  • ★ ITEM NUMBER: 48" Chrome Stainless Steel Flexible Radiator Hose Kit, contains enough ends for 2 lengths of hose. Clamps, sleeves, reducers, caps..
  • ★ PREMIUM QUALITY: Made from extremely high quality stainless steel, then chromed to a beautiful shine. Stainless hose will not blow or rot out like a rubber one..
  • ★ EASY TO INSTALL: These hoses can be formed by simply bending them to the desired shape, Flexible design eliminates the hassle of finding a rubber hose with just the right bends, The hose can also be cut to the required length.
  • ★ PRODUCT FEATURE: This radiator hose kit can be used with 1 1/4", 1 1/2", 1 3/4" radiator necks.
  • ★ QUALITY ASSURANCE: 100% brand new Stainless Steel flex radiator hose, 1 Year Warranty, Buy with confidence! If problem in the year quality warranty time, pls not hesitate to contact us for a free and easy replacement or refund..
Check Stock

Radiator Overflow Tank 2L Universal Coolant Overflow Tank Aluminum Radiator Overflow Tank Visible Coolant Level Radiator Expansion Tank Used To Prevent Coolant Leakage Coolant Recovery Tank

  • 1.[Coolant Reservoir Tank For Car Engine Maintenance]: Universal overflow resivior can be used as an exhaust gas engine oil pot and an overflow pot....
  • 2.[ Radiator Rreservoir Tank With Simple Working Principle ]When the pressure of the coolant in the radiator exceeds the set value of the pressure....
  • 3.[ Coolant Overflow Tank With A Wide Range Of Applications ]: The radiator overflow tank is highly compatible and compatible with most cars. Please....
  • 4.[ High-quality and easy-to-install Radiator Overflow Tank ]: The coolant overflow tank is made of aluminum and is very durable. It can also prevent....
  • 5.[ Large Capacity & Accurately Designed Radiator Expansion Tank ]: The capacity of the coolant overflow tank is 2L, which is twice that of the....
Check Stock

10" 12V Universal Electric Radiator Cooling Fan Push Pull Slim Mounting Kit 1250 CFM （Diameter 10.75" Depth 2.56")

  • Overall Diameter:10.75 INCH,Installation Stand:5.98 INCH, Overall Thickness:2.56 INCH.
  • 1250 CFM Car Cooling Fans:Amp Draw: 6-7 amp.
  • great as replacement or upgrade from factory parts..
  • Simple installation, no modifications required.Fan can be used as pusher or puller with the adaptable mounting kit..
  • How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!.
Check Stock

PrimoChill EximoSX 360mm (40mm) Ultra PC Water Cooling Radiator, 120mm x 3, Triple Fan (R-EXI4036) Available in 20+ Colors, Powdercoated in USA and Custom Watercooling Loop Ready - Sky White

  • PrimoChill Premium Slim PC Water Cooling Radiator available in 20+ colors for the perfect custom look in watercooling the 30mm thickness is perfect for any system install, large or small.
  • Powdercoated in the USA by our team to bring you the best possible finish in the most colors available in any customer watercooling radiator on the market today.
  • Premium high performance slim water cooling radiator with high density tube/fin ratio for extreme heat dissipation as well as 7x dual pass coolant tubes optimized fin layout for low RPM fans.
  • Radiator includes all mounting hardware for and logo badge to be applied once radiator is install so the logo is in the correcty position. Once again PrimoChill going the extra mile to make your custom watercooling loop perfect.
  • Radiator Specifications: Dimensions 395 x 120 x 40mm (L x W x H), 2 G 1/4 Ports (1 in 1 out), ALL COPPER constructed fins and coolant tubes for maximum coolant per square inch.
Check Stock

Universal Slim Fan Push Pull Electric Radiator Cooling Fans 12V 80W Engine Fan with Mount Kit （Diameter 8.27" Depth 2.56")

  • Overall Diameter:8.27 INCH, Overall Thickness: 2.56 INCH.
  • 1000 CFM,Car Cooling Fans: Amp Draw: 6.66 amp.
  • great as replacement or upgrade from factory parts..
  • Simple installation, no modifications required.Fan can be used as pusher or puller with the adaptable mounting kit..
  • How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!.
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • Radiator pressure tester & coolant vacuum refill kit mainly includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1PC universal cone rubber adapter, fit nearly any type of radiator openings on vehicles at home and abroad, helping detect and determine whether the water tank is leaking and fill the coolant under vacuum. There are also 3PCS radiator cap adapters and 2PCS connectors checking the radiator caps for leaks..
  • Radiator pressure tester is composed of 3" pressure gauge(0-35 psi.
  • 0-2.5 bar), aluminum cylinder pump and 21" long rubber hose. Manual radiator leak tester features fast pressure relief function and quick disconnect for convenience. Use the hand gauge tester pump tool to pressurize the radiator / cap and observe whether the pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass....
Check Stock

cciyu 8"Inch Push Pull Slim Electric Radiator Cooling Fan Mount Kit Universal Plastic Black

  • FIT VEHICLES – Radiator/Condenser cooling fan is universal and OE fitment or replacement, push or pull type.
  • FEATURES – Our engine cooling fan assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our fan assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • EASY INSTALLATION – Step 1: For Electric Radiators, Disconnect Electrical Wiring. Step 2: Remove Radiator Fan Shroud.
  • Step 3:Remove the Old Fan.use your wrench and/or ratchet and socket set to remove the bolts or disassemble the fan clutch and fan assembly.
  • Step 4: Replace Radiator Fan.insert new fan into the space where the old radiator fan was previously installed.
  • Step 5: Reattach Electric Wires and Test..
  • PAKCAGE INCLUDING – We offer 1 piece of high performance radiator cooling fan and buy with confidence..
  • NOTE – Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock