Top Raid 0 1 Support

DELL 47MCV Dell Perc H200 PCI-Express SAS RAID Controller 47MCV

  • RAID 0, RAID 1, and RAID 10 functionality. Supports both SAS and SATA. Support for SSDs.
  • Support for LT03 060, LT04, and LT05 tape drives.
Check Stock

LSI 9267-8i 6Gb/s PCI 2.0 1G Cache 8Port Internal SATA/SAS Controller raid Card

  • SATA + SAS array card supports RAID 0,1,10.
  • PCI-Express 3.0 interface, supporting up to 1024 devices in non-RAID mode (JBOD mode).
  • Support for Mega RAID storage management, environmental protection and low power consumption control.
  • Support fast initialization and fast array setting.
  • Support staggered boot SATA drive, hot plug-in, global hot backup.
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

Dell PERC H200 6GBs SAS PCIe Raid Adapter X905N LSISAS2008/62114B1 chipset

  • RAID 0, RAID 1, and RAID 10 functionality. Supports both SAS and SATA. Support for SSDs.
  • Support for LT03 060, LT04, and LT05 tape drives.
Check Stock

Gigabyte Intel Z97 LGA 1150 Micro ATX Motherboard GA-Z97M-DS3H

  • CPU: Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1150 package.
  • DDR3 3100(O.C.) / 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz.
  • Onboard Graphics: 1 x D-Sub port, supporting a maximum resolution of 1920x1200at60Hz.
  • 1 x DVI-D port, supporting a maximum resolution of 1920x1200at60Hz.
  • 1 x HDMI port, supporting a maximum resolution of 4096x2160at24Hz or 2560x1600at60Hz.
  • Expansion Slots: 1 x PCI Express x16 slot, running at x16.
  • Storage Interface:6 x SATA 6Gb/s connectors Support for RAID 0, RAID 1, RAID 5, and RAID 10.
  • USB:6 x USB 3.0/2.0 ports, 6 x USB 2.0/1.1 ports.
Check Stock

ORICO 3.5 Hard Drive Enclosure Type-C to SATA III Aluminum 5 Bay Raid External HDD Enclosure Up to 80TB Support RAID 0/1/3/5/10/JBOD/ClONE/Normal-WS500RC3

  • [80TB Larger Capacity] - WS series drive bay enclosure can support all 3.5inch sata hard disks under less than or equal to 16TB HDD, altogether 80TB large capacity for hard drive expansion, maximize to meet your data storage and backup demand. The 3.5inch drive enclosure also a good choice for nas expansion or the data protector in big enterprise.
  • [Support RAID Mode] - The 5 bay external hard drive raid enclosure support RAID 0/1/3/5/10/JBOD/ClONE/Normal RAID Mode which can meets different work requirements, and enlarge the ways of working habits. With back cover RAID Set and built-in RAID software management, you can choose the way you convenient. Please operation follow the page description and user manual of the 5 raid bay enclosure.
  • [Great Heat Dissipation Performance] - Designed with a built-in cooling fan and honeycomb heat dissipation holes on the front and back cover of the 5 bay type c external hard drive enclosure, made by all aluminum alloy enclosure and allows the heat generated in the use to be accelerated by the flowing wind for the great ventilation performance.
  • [5Gbps Transfer Speed] - The external hard drive enclosure adopts high performance master control scheme, and set with SATA3.0 interface, the data transfer rate of the sata 3 encl....
Check Stock

GIGABYTE GA-M68MT-S2P AM3 NVIDIA GeForce 7025/nForce 630a chipset Micro ATX AMD Motherboard

  • CPU: Support for AMD AM3/Phenom II/Athlon II processor. Chipset: NVIDIA GeForce 7025/nForce 630a chipset.
  • Memory: 2 x 1.5V DDR3 DIMM sockets supporting up to 8GB of system memory, Dual channel memory architecture, Support for DDR3 1333(OC)/1066/800 MHz memory modules.
  • Audio: Realtek ALC889 codec, High Definition Audio, 2/4/5.1/7.1-channel. LAN: Onboard Realtek RTL8211CL (10/100/1000Mbit).
  • Expansion Slots: 1 x PCI Express x16 slot, running at x16. 2 x PCI Express x1 slots. 1 x PCI slot.
  • Storage Interface: 4x SATA 3Gb/s connectors. Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD.
  • Internal I/O Connectors:1 x 24-pin ATX power connector/1 x 4-pin ATX 12V power connector/4 x SATA 3Gb/s connectors/1 x CPU fan header/1 x system fan header/1 x front panel header/1 x front panel audio header/3 x USB 2.0/1.1 headers/1 x parallel port connector/1 x clearing CMOS jumper.
  • Back Panel Connectors:1 x PS/2 keyboard port/1 x PS/2 mouse port/1 x serial port/1 x D-Sub port/4 x USB 2.0/1.1 ports/1 x RJ-45 port/3 x audio jacks (Line In / Line Out / MIC In).
Check Stock

DiLinKer OCuLink SFF-8611 to PCIE SFF-8639 U.2 NVMe with Power Cable 1M

  • Create high-performance storage with configurable RAID by installing two M.2 SATA SSDs into a 2.5 SATA interface.
  • Dual-Slot M.2 to SATA Adapter supports multiple RAID modes: RAID 0 / RAID 1 or spanning or JBOD.
  • Supports B key M.2 SATA SSDs including full-length M.2 SSD drives (2230 / 2242 / 2260 / 2280) (Not compatible with M.2 NVMe or AHCI PCI-Express SSDs).
  • TRIM support to enhance the stability and performance of your M.2 SSDs plus provides SMART support.
  • M.2 Adapter / M.2 SSD Adapter / M.2 SATA Adapter / Dual M.2 to SATA Adapter / M.2 Drive to SATA Adapter / Dual SSD Adapter / M.2 SATA SSD / m 2....
Check Stock

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R)

  • HIGH PERFORMANCE: Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1.
  • HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives. Easy to install with all necessary hardware incl. (M.2 drives and screwdriver not incl.).
  • WIDE COMPATIBILITY: Supports B & B+M key SATA M.2 SSDs in 2230/2242/2260/2280 form factors. Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART. M & B+M key NVMe or AHCI PCI-e M.2 SSDs not supported (only SATA supported)..
  • TRIM SUPPORT: TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support. TRIM supported in JBOD and RAID 1, SMART only supported in JBOD..
  • NOTE: Before purchasing this product or your M.2, please confirm if it is a SATA type, via manufacturer specifications/support.
  • if you intend to use JBOD (don't intend to use RAID) then make sure that your SATA port/controller supports Port Multiplier..
Check Stock

Gigabyte GA-970A-DS3 AM3+ AMD 970 SATA 6Gb/s USB 3.0 ATX AMD Motherboard

  • CPU: AMD AM3+ FX/Phenom II/Athlon II processor. Chipset: North Bridge: AMD 970. South Bridge: AMD SB950..
  • Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory. Dual channel memory architecture. Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules..
  • Audio: Realtek HD audio codec. High Definition Audio. 2/4/5.1/7.1-channel. Support for S/PDIF Out. LAN: Realtek GbE LAN chip (10/100/1000 Mbit).
  • Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 3 x PCI Express x1 slots. 2 x PCI slots. Support for AMD CrossFireX technology..
  • Storage Interface: 6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD..
  • USB: South Bridge: Up to 12 USB 2.0/1.1 ports. Etron EJ168 chip: Up to 2 USB 3.0/2.0 ports on the back panel.
  • Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/6 x SATA 6Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x power fan header/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/3 x USB 2.0/1.1 headers/1 x Clear CMOS jumper.
  • Back Panel Connectors: 1 x PS/2 keyboard/mouse port. 6 x USB 2.0/1.1 ports. 2 x USB 3.0/2.0 ports. 1 x RJ-45 po....
Check Stock

Syba 5 Bay 2.5 and 3.5 SATA HDD External USB 3.0 / eSATA RAID Hard Drive Enclosure Support 80TB & RAID 0/1/5/10/JBOD RAID Mode SY-ENC50122

  • Supports all brands of 2.5" and 3.5" SATA I/II/III hard disk drive up to 16TB per drive up to 5 x 16TB with a maximum support of 80TB..
  • Raid Support: RAID 0, RAID 1, RAID 3, RAID 5, Raid 10, SPAN, and JBOD..
  • eSATA interface requires Port Multiplier with FIS-based switching on main computer to enable access to multiple HDDs simultaneously..
  • USB 3.0 interface provides maxium speed up to 5 Gb/s. UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux..
  • The tray-less design provides a simple way of HDD removal and installation – simply pull the handle to insert or withdraw the HDDs..
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock