Top Raid Controller

Dell 3J8FW H200 Raid Controller - R Series Servers

  • Dell Perc H730p Raid Controller Card - 2 Gb - 12gb/s Sas, Serial Ata/300 - Pci Express 3.0 X8 - Plug-in Card - Raid Supported - 0, 1, 5, 6, 10, 50, 60 Raid Level - 8 Total Sas Port(s) - 8 Sas Port(s) Internal - Linux, Pc - 2 Gb Flash Backed Cache.
Check Stock

Oyen Digital Novus 16TB External USB-C 7200RPM Hard Drive

  • ...s independent raid 1 (mirror) volumes for reliability of raid 0 backup (strip) for optimal performance and maximum speed or use try to combine drive capacities into a single volume for extra-large storage capacity.
  • (2) thunderbolt 3 ports - speed and storage: hardware raid controller (raid 0.1, span or jbod / independent) - easy camera loads: sd 4.0 card reader (uhs-ii) front - a hub of options: (2) usb 3.1 Gen 1 ports (type a) - full steam ahead: ethethethethetho port ernet from 1 gb - custom configurations: (2) 2.5-inch or 3.5-inch sata drive bays.
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....
Check Stock

Dell PERC H830 RAID SAS 12GB/S PCIE 3.0 X8 405-AAER 463-0705

  • Dell Perc H730p Integrated Raid Controller,2gb Nv Cache - 12gb/s Sas, Serial Ata/600 - Pci Express 3.0 X8 - Plug-in Card - Raid Supported - 0, 1, 5, 6, 10, 50, 60 Raid Level - 8 Total Sas Port(s) - 8 Sas Port(s) Internal - Linux, Pc - 2 Gb Flash Backed Cache.
Check Stock

VIA VT6421A 3-Port SATA Raid & IDE Controller PCI Card

  • VIA VT6421A SATA Raid Controller and IDE PCI Card General Features: VIA VT6421A chipset PCI interfac.
  • Supports three SATA and one PATA (IDE) hard disk drives Up to 150 Mbps data transfer rate.
  • Only SATA supports RAID Supports ATA 133 high performance hard disk drives.
  • Supports Ultra DMA mode 6/5/4/6/2/1/0 Supports DMA mode 2/1/0 Supports PIO mode 4/3/2/1/0.
Check Stock

Ableconn PEX-SA151 SATA III RAID 2-Port PCIe x2 Card (ASMedia ASM1062R Controller) - Support RAID 0 / RAID 1 / Span / Non-RAID

  • 2-Port SATA 6Gbps PCIe Gen2 x2 card powered by ASMedia 1062R controller.
  • Support Hardware RAID 0, RAID 1, SPAN, and Non-RAID modes. Support NCQ and TRIM. RAID Configuration at BIOS booting or through Windows GUI tool to monitor RAID status..
  • Legacy ROM on board that supports Legacy BIOS mainboard Booting for Windows and Linux. The product does not support booting for UEFI mainboards..
  • No driver installation is required on Windows 10/8/7, Server 2008 and later, Linux, macOS 10.9.1 and later. The AHCI drivers are natively built-in on most Operating Systems.
Check Stock

Adaptec RAID 71605 Storage Controller 2274400-R

  • ▶【8 Ports SATA 3.0 Adapter Card】: Acasis SATA card is equipped with 8 SATA 3.0 interfaces and supports the simultaneous connection of 8 SATA hard disks, the transfer speeds up to 6Gbps, You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
  • ▶【Easy to Install】: PCIe to SATA 3.0 Host Controller Card with a standard profile Bracket, PCIE Gen 2 X1 interface design, will works on PCIE X1, X4, X8, X16 slot, compatible with most size chassis on the market. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase.
  • ▶【80TB Expansion】: 8 Ports SATA 3.0 interfaces can expand to 80 TB, provide a high-volume database for your workstation and computer equipment. With using The chip JMB575+JMB1064 Chipset, improve this card more stable and compatible.
  • ▶【Supports Soft-RAID Mode】: The system comes with soft RAID and support four storage modes: RAID1 (SAFE Mode), AHCI1 (PM Mode), SPAN (BIG Mode) and RAIDO (FAST Mode). Supports Windows 7/ 8.1 / 10 / Linux, install the driver before add the HDD in system.
  • ▶【What You Get】 : 1 x 8-port SATA 3.0 controller card, 8 x SATA cable, 2 x SATA power splitter cable, 1 x user manual.
Check Stock

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 1.6 Feet, 0.5m

  • This is Reversed Cable, 4x7Pin Sata is host, connect to the motherboard or RAID Controller with SATA ports. Mini SAS 36 (SFF-8087) is the target, connect to the Backplane with MINI-SAS port.
  • Before you buy this cable, please make sure the Mini SAS 36 (SFF-8087) on your backplane. If the Mini SAS 36 (SFF-8087) on your motherboard or RAID Controller, this cable will not work with them.
  • Mini SAS 36 (SFF-8087) connect to the Backplane, 4 x SATA connect to 4 Controller.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

OWC 12TB Mercury Elite Pro Dual USB-C w/ 3 Port Hub

  • Pro-grade storage speed: Enclosure speed up to 974MB/s real-world tested*.
  • Selectable hardware RAID settings: Hardware RAID controller (RAID 0, 1, Span or JBOD/Independent).
  • Compatible: use with USB-C and Thunderbolt 3 computers.
  • Connect and charge: (1) USB 3.2 Gen 2 10GB/s Type-C port and (2) USB 3.2 Gen 2 10GB/s Type-A ports for audio or video mixers, digital cameras, card readers, tablets, and other devices.
  • Whisper quiet: heat-dissipating aluminum with 30dB cooling fan.
Check Stock

StarTech.com 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card w/ 2 mSATA Slots & HyperDuo SSD Tiering - PCIe SATA 3 Controller (PEXMSATA3422)

  • Combine SSD performance w/ HDD capacity & create a HyperDuo array with 2 mSATA + 2 SATA drives through your computers PCIe slot.
  • 2 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card w/ 2 mSATA Slots & HyperDuo SSD Tiering / mSATA Adapter.
Check Stock

Intel Raid Controller Rs25Db080, Single

  • Intel RS2VB040 4-port SAS Controller * Serial Attached SCSI (SAS) - PCI Express 2.0 x8 - Plug-in Card - RAID Supported - 0 1 5 6 10 50 60 RAID Level - 512 MB (RS2VB040).
Check Stock

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R)

  • HIGH PERFORMANCE: Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1.
  • HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives. Easy to install with all necessary hardware incl. (M.2 drives and screwdriver not incl.).
  • WIDE COMPATIBILITY: Supports B & B+M key SATA M.2 SSDs in 2230/2242/2260/2280 form factors. Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART. M & B+M key NVMe or AHCI PCI-e M.2 SSDs not supported (only SATA supported)..
  • TRIM SUPPORT: TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support. TRIM supported in JBOD and RAID 1, SMART only supported in JBOD..
  • NOTE: Before purchasing this product or your M.2, please confirm if it is a SATA type, via manufacturer specifications/support.
  • if you intend to use JBOD (don't intend to use RAID) then make sure that your SATA port/controller supports Port Multiplier..
Check Stock