Top Raid Monitoring - BuyWiseBest.com

Mediasonic HFR2-SU3S2 PRORAID 4 Bay 3.5' SATA Hard Drive Enclosure - USB 3.0 & eSATA

Support 3.5″ SATA I / II / III hard disk drive up to 16TB per drive, Support Hard Drive Transfer Rate up to SATA III Speed. Hardware Raid controller built-in on board with one-button control..
One Button Raid Control support Single Drive Mode, Raid 0 (Spanning) JBOD, Raid 0 (Stripping), Raid 1 (Mirroring), Raid 3 (Stripped set with dedicated parity), Raid 5 (Stripped set with distributed parity), Raid 10 (Mirroring + Striping).
Transfer rate up to 5.0Gbps via USB 3.0, up to 3.0Gbps via eSATA..
Smart Fan with built-in thermal-sensor, Auto & Manual modes, and 3 speed levels.
Compatible with Mac OSX 10.8 or later and Windows 10 / 8.1 / 8 / 7.

Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
80 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
Configures hardware RAID modes easily using mode switches.

Firewire 800 /IEEE 1394b (Up to 100 MB/Sec).
100 Terabyte Capacity (Formatted capacity will vary depending on the RAID mode selected).
JBOD (default), RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, Combine (Span).
Configures hardware RAID modes easily using mode switches.

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

Improving overall performance: TLC 3D NAND flash and “SLC Cache technology” optimising the overall performance.
15 x faster than a standard 5400 HDD with SATA III 6GB/s interface.
Low power consumption, shock and vibration-proof, noiseless and low latency.
ECC technology to guarantee reliable data transmission.

Interface: USB 3.0, eSATA, and FireWire 800.
Simple RAID configuration via switch settings, no software required.
RAID 0, RAID 1, RAID 10, RAID 3, RAID 5, SPAN, JBOD.
Note: We recommend using only Enterprise or NAS drives (512e only). The Mobius is not compatible with 4Kn hard drives..

MULTILANE MINI SAS DATA CABLE directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
LEVERAGE RAID CONTROLLER PERFORMANCE with this straight, 4-lane, high performance internal Mini SAS 4i cable.
Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
DIY OR IT PRO INSTALLERS both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
3 foot mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces and provides sufficient length for internal cable management.
Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
Ideal component of a professional SAN network.
ROBUST DESIGN of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connect....

Multilane Mini SAS data cable directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
Leverage RAID controller performance with this straight, 4-lane, high performance internal Mini SAS 4i cable.
Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
DIY or IT pro instrallers both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces.
Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
Ideal component of a professional SAN network.
Robust design of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection.
SFF-8087 host compatible with popular controller HBA cards such....

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..