Top Rain tight Fittings

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

  • Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
  • The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
  • The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
  • Zerk fittings included to replace clogged, broken, or damaged fittings..
  • Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..
Check Stock

Uenede 2PCS Solid Brass Bulkhead Fitting 3/8”Female x 1/2”Male Double Threaded Bulkhead Water Tank Connector

  • 【Solid Brass】The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【High Quality Thread】The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering..
  • 【Double Washers Double Protection】Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something..
  • 【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate..
  • 【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life..
Check Stock

Rain Bird XFD0912250 XF On Surface Dripline Hose Drip Irrigation Dual Layered Tubing Coil with 0. GPH and 12 Inch Spacing, 250 Feet, Brown

  • DEPENDABLE DRIP TUBE: Dependable 0.5-inch distribution tubing runs water from outside faucet.
  • Dimensions (L x W): 250 feet x 0.5 inches.
  • Connects with 0.5-inch barbed or compression fittings.
  • FLEXIBLE: Offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation.
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi.
  • DUAL-LAYERED: Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage.
  • SPECIFICATIONS: Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings.
  • Use an Air/Vacuum Relief Valve Kit when installation is below soil.
Check Stock

Renator P72-02330G Brass Spigot for Rain Barrel. Lead-Free Compliant, 3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting, Thread Tape, and Polyester Wire

  • ...l valve and body and aluminum handle (with orange paint spray), this spigot is built for longevity. The spigot also contains less than 0.25% lead, compliant with the EPA's Lead Free requirement..
  • COMPLETE KIT AT A FAIR PRICE. Instead of purchasing separate washers and fittings, save yourself time and money by purchasing this full kit at once. This kit contains: 3/4" spigot with quarter turn valve, 3/4 inch bulkhead fitting (with washer), roll of teflon tape, wire, installation guide. REQUIRED: Drill, a 1-1/4 inch saw bit, adjustable or 1 inch wrench..
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • 【Premium Material】: Our dot air line quick connect fittings are made of PU, Plastic, the air line fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air fittings assortment: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The air hose kit fittings are suitable for PU / PA / PE / PVC. The air brake fittings assortment kit can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no to....
Check Stock

FORMUFIT F114TEE-WH-4 Tee PVC Fitting, Furniture Grade, 1-1/4\ Size, White (Pack of 4)

  • 【0% Metaloxide】: Poly PEX A expansion tee fittings made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
  • 【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
  • 【160 PSI, 200°F】: Expansion tee fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
  • 【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
  • 【Package】: 1/2" Poly Expansion PEX A Tee Fittings 15PCS. (Note：Expansion tool and rings are not included)..
Check Stock

LockNLube Narrow Needle Dispenser

  • Extra reach for hard to reach grease fittings.
  • Snaps directly onto a jaw type coupler to reach grease fittings in very tight spaces.
  • Works best with the LockNLube Grease Coupler.
  • Delivers a fine line of grease for shafts and other applications.
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Thomas & Betts 12008100 1' BLUE ENT 100' COIL

  • Recognized for use with PVC rigid non-metallic conduit fittings with all size of ENT.
  • One piece ENT coupling, threaded terminator and rigid non-metallic conduit fittings are rated concrete tight without tape.
  • Flex-Plus Blue ENT is a non-metallic flexible raceway for use in walls, floors, and non-plenum ceilings.
  • Lightweight, hand bendable, and free from sharp edges which reduces installation time and saves money.
Check Stock

Goulds J7 Convertible Jet/Deep Well Pump - 115V/230V - 3/4 Hp

  • Back Pullout design for service without disturbing piping.
  • Two compartment motor for access to wiring and replaceable components.
  • Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
  • Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.
Check Stock

Maxx Flex (1 1/2' Dia. x 25 ft) - HydroMaxx® White Flexible PVC Pipe, Hose, Tubing for Pools, Spas and Water Gardens

  • Very Flexible, ideal for working in confined areas. Crush and impact resistant..
  • Reduces the number of required fittings and permits the installer/user to make smooth, tight turns, thus, Saves time, labor and cost..
  • True Schedule 40 PVC Pipe. Uses Standard Sch 40 Fittings and PVC Glue and can be connected to rigid PVC with ease.
  • Sun, ozone (UV) and chemical resistant, Coils easily for storage and transportation.
  • Smooth inside and out - permits unrestricted flow, reducing operating costs. Precisions outside diameter (standard IPS size) is designed to be glued into standard Schedule 40 PVC fittings..
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock