Top Rapid Tap And Drill Bit Set

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
  • Set contains matching NPT pipe tap and high speed steel drill bit.
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

Viking Drill and Tool by Norseman 57580 SP-18TD Type 20-UB Spiral Point Plug Style Magnum Super Premium Tap/Drill Set

  • 18 pc. Tap and Drill Set Premium High Speed Steel Spiral Point, NC.
  • Contains: #36, 29, 25, 21, 7, F, 5/16, U, 27/64, 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13.
  • Set includes tap and corresponding drill bit.
Check Stock

JEFE HEX 5/16\ Hex Shank Titanium HSS Twist Drill Bits, 135 Degree Easy Cut Split Point Drill Bit for Steel, Copper, Aluminum, Zinc Alloy, Wood and Plastics, Packed in a Double Blister.

  • 【Various sizes】12pcs titanium drill bit set in SAE and metric with all popular sizes. 6 pieces SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC. 6 pieces metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5. Each hex drill bits is engraved with size label, which is convenient for you to read and choose..
  • 【Quick Change】Comes with a quick change adapter, with lock function, can be firmly and stably installed on the electric drill. Maximize efficiency by switching between different sizes easily. 1/4 inch hex shank adapter fits for electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine..
  • 【Premium HSS】Made of premium high speed steel and titanium coating, the impact drill bit set features sharp and fast execution and better precision to retain strength and efficiency, the hex tail has good impact resistance and fracture toughness. Rust-proof and corrosion-resistant, more wear-resistant and long lasting..
  • 【Multiple Application】The drill and tap set with high hardness, can easily work on wood, PVC, plastic, aluminum, copper and metal sheet etc. These metal drill bits suitable for drilling, tapping, deburring and countering holes..
  • 【High efficiency】 All in one, no need to drill a hole....
Check Stock

6 pcs Step Drill Bit Set HSS Unibit Step Drill Bit and Automatic Center Punch Double Cutting Blades Hex Shank Step Bits for Metal with Aluminum Case

  • 【Double cutting blades】 Our step drill bit features a double cutting blades design, provides a smoother cut with rapid chip evacuation, making it easier to dislodge particles from the material. The 118° tip design enhances cutting speed and increases wear resistance while preventing tool walking..
  • 【HSS】 The step drill bit set is made of high speed steel, wear resistant and corrosion resistant to extend the life of the step bit..
  • 【Automatic center punch】 The carbide tip makes the center punch stronger. Knurling design on the surface makes it easy to prevent slippage..
  • 【What you get】 Our unibit step drill bit set includes 5 standard drill bits and an automatic center punch that can be used to machine 50 diameters of holes for metal, wood, plastic sheet and other materials, greatly increasing work efficiency. Our set includes 1 x 6 step bit (1/4" shank.
  • 3/16" - 1/2"), 1 x 13 step bit (1/4" shank.
  • 1/8" - 1/2"), 1 x 10 step bit (3/8" shank.
  • 1/4" - 1-3/8"), 1 x 12 step bit (3/8" shank.
  • 3/16" - 7/8"), and 1 x 9 step bit (3/8" shank.
  • 【Safe storage】 The step drill bit set comes with a custom aluminum case, sturdy and durable, easy to store and carry..
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

  • Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
  • 3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
  • Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
  • Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
  • Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..
Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

  • ★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
  • ★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
  • ★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
  • ★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
  • ★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
Check Stock

Hymnorq Metric HSS 4341 Combination Drill and Tap Bit Set of 6pcs – Including M3, M4, M5, M6, M8, M10-1/4” Hex Shank and Self-centering Split Point - For Tapping in Wood Plastic and Aluminum

  • Back tapered beyond tap to prevent thread damage from over-drilling.
  • Deburr/countersink also provided on bit beyond back taper.
  • Quick change adaptor included in both metric and standard kits.
  • All operation in one time with power drill saves labor and time.
  • Made from hardened high-speed steel vs. carbon steel for longer life.
  • Point is self-centering and eliminates the need for center drilling or center punching.
  • 6 sizes in one drill and tap bit set (M3, M4, M5, M6, M8, M10) to meet your diversified requirements.
  • Drill and tap bits have high quality hex shank to confirm strong connection to drill chuck. Ideal for hole drilling, tapping and deburring/countersinking applications in wood, plank, mild steel, copper, brass and aluminum metals.
Check Stock

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

  • [What You Will Have] Set of 6 metric tap drill bit set M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please c....
Check Stock