Top Raspberry Gpio Breakouts

5Pcs GPIO Ribbon Cable for Raspberry Pi Male to Female 40pin Breadboard Jumper Wire Computer Accessories 20cm(Male to Female)

  • The GPIO cable can be connected to a 3.5 inch display for easily use.
  • Professional designed for Raspberry Pi male to female GPIO cable.
  • Possess 20cm length and 40pin in total, enough to meet your demands.
  • This cable wire can be used to extend the GPIO of for Raspberry Pi.
  • GPIO wire can be connected to T board, breadboard and other operations.
Check Stock

WayinTop RPi GPIO Breakout Expansion Kit for Raspberry Pi 4B 3B+ 3B 2B B+, T-Type GPIO Expansion Adapter Board + 830 Tie Points Solderless Breadboard + 40pin GPIO Flat Ribbon Cable + 65pcs Jumper Wire

  • 【Updated Starter Kit for Raspberry Pi】This is a updated Assembled starter kit for for Raspberry Pi 4B/3B+/3B/2B/B+, including GPIO Adapter Board with Wiring Diagram Card, 40pin GPIO Rainbow Fat Cable, 830 Tie Points Solderless Breadboard and 65pcs Jumper Wire..
  • 【GPIO Adapter Board with Wiring Diagram Card】You can connect much version raspberry of the board to various sensors and electronic components with the GPIO extension board..
  • 【40pin GPIO Rainbow Fat Cable】IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable.
  • Material: High-quantity copper soft wire material for safe and durable.
  • Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests..
  • 【830 Tie Points Solderless Breadboard】made of high quality ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling, with self-adhesive tape on back and multiple links to buckle..
  • 【65pcs Flexible Jumper Cables】Flexible, durable, reusable, easy to connect and disconnect.
  • 4 Kinds of length: 12cm(49pcs), 16cm(8pcs), 20cm(4pcs), 24cm(4pcs).
  • these jumper cable wires can connect each other through the pin connection, do not need welding, can fit for fast circuit....
Check Stock

GeeekPi Raspberry Pi Zero 2 W Case/Zero W Case, 7 in 1 Basic Starter Kit with Raspberry Pi Zero Heatsink, 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver (Black)

  • Compatible with Raspberry Pi Zero/Zero 2 and Raspberry Pi Zero W/Zero W 2 (Raspberry Pi Zero Board is Not Included).
  • Case with Power Supply, refer to ASIN B09Q5CHCGX.
  • The heatsink is for better heat dissipation and GPIO header makes it easy to connect the GPIO ports..
  • Acrylic case with 2 covers and screws to install..
  • Access to all ports of Raspberry Pi Zero Board..
  • Package includes a case, heatsink, switch cable, OTG cable, HDMI adapter, GPIO header, and a screwdriver..
Check Stock

SamIdea 2-Pack 40pin Male to Female IDC GPIO Rainbow Ribbon Cable Jumper Wire for Raspberry Pi A+/B+/3 B, 20cm/8'

  • 8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero.
  • Pin Pitch: 2.54 mm,Their Diagram as Product image show.
  • 2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable.
  • GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5¡± 5 inch TFT touchscreen LCD display are not including..
  • SamIdea is a Registered Trademark, can not sold without authorization..
Check Stock

REXQualis RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
Check Stock

Treedix Compatible with Raspberry Pi 3B/3B+/4B GPIO Breakout Expansion T-Type Board with 20cm FC40 40pin Cable Development Board

  • The small board is connected to the 40-pin GPIO connector on the Raspberry Pi, and these pins are assigned to a breadboard-friendly layout and spacing.
  • T-shaped expansion board and breadboard make the experiment more convenient.
  • Using the GPIO expansion board, you can connect all versions of the Raspberry Pi to various sensors and electronic components.
  • Purpose: It can be used for the pin experiment of the experiment board, adding experimental items, etc., and it can be connected to the pin very reliably by simple soldering by yourself. 5. Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
  • Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
Check Stock

MakerFocus Raspberry Pi 4 GPIO Expansion Board Breakout GPIO Screw Terminal Hat Compatible with Raspberry Pi 4b 3b+ 3b 2b b+ Raspberry Pi Zero and Zero W

  • User manual: Please get the link from the product description below.
  • Easy to Assemble - This is a very beautiful screw terminal expansion version, which is expanded for the pins of the Raspberry Pi. Our raspberry pi hat is convenient for everyone to connect when doing electronic experiments..
  • Observe GPIO Status - The status information of the pin is displayed. When the GPIO pin is operated and effective in the terminal, the LED matrix on the right side of the terminal will display the status of the GPIO pin, and some distinctions are made in the color selection of the LED lights..
  • Fine Terminal Pinout - There is the pin out information of the GPIO pin on the top of the terminal and on the side..
  • Different Color LED Indicators - For example, the 5V power light is red, while the 3.3V power light is pink, the light of the special function pin is dark blue, and the indicator light of the ordinary GPIO pin is light blue.
Check Stock

RasTech Raspberry Pi 3 Model B Starter Kit with 32GB Micro SD Card, Power Supply with ON/Off, Case, Micro SDHC Card, Cooling Fan, HDMI Cable, Network Cable, Heatsinks, Card Reader, Screwdriver

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

Geekworm Raspberry Pi 3 B+ Case, Raspberry Pi 3B+/3B Aluminum Alloy Heavy Duty Passive Cooling Metal Case with Heatsink Pillar for Raspberry Pi 3 Model B+/Raspberry Pi 3 Model B-Black (P252)

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

Geekworm Raspberry Pi 4 Case, Pi 4 Heatsink Case, Raspberry Pi 4 Aluminum Passive Cooling Case with Heatsink Pillar for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Only (P232)

  • New version Raspberry Pi 4 passive cooling aluminum case is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 2GB 4GB 8GB version.
  • Design with good heat dissipation, passive cooling design, don't need to install the cooling fan or heatsink..
  • Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable and TF card slot reserved..
  • Made of high quality aluminum material. With 4 aluminum columns to contact with the Raspberry Pi 4 chips for better heat dissaption..
  • Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
Check Stock

Raspberry Pi 400 Computer kit,4GB RAM,with Raspberry Pi 400 Keyboard, Wired Mouse, Micro HDMI Cable, Type-c Power Supply,16GB Card Preloaded with Raspberry Pi OS

  • Raspberry Pi 400 is a powerful, easy-to-use computer built into a neat and portable keyboard.Just simply connect to a mouse, and a monitor with the Pi 400, you will get a complete personal Computer..
  • Featuring a quad-core 64-bit processor, 4GB of RAM, dual-display output, and 4K video playback, as well as a 40-pin GPIO header..
  • Raspberry Pi 400 incorporates a purpose-built board based on Raspberry Pi 4. Featuring the same powerful processor, Raspberry Pi 400 has specially designed thermals to keep your computer cool and silent while you’re hard at work..
  • The GPIO pins remain accessible, so if you want to explore beyond the desktop, you can connect components and prototype your projects..
  • Package Includes:1 x Raspberry Pi 400 - US layout.
  • 1 x Raspberry Pi Official USB-C Power Supply.
Check Stock

Geniatech XPI-3128 Single Board Computer,Embedded Computer Module,Development Board ,Rockchip RK3128 Quad Core Cortex-A7 8GB WiFi ,Card-Sized High Performance Board

  • 85mm*56mm, Credit-card-sized High Performance Board.
  • 4*USB HOST, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 100M LAN interface,Support Micro SD card.
  • Rockchip RK3128 with Quad-core Cortex-A7 up to 1.2GHz.
  • 40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, PWM, UART, and GPIO. Form-factor compatible with Raspberry Pi 3 for easy migration..
  • Form Factor & GPIO Compatibility with Raspberry Pi for Maximum Re-usability.
Check Stock