Top Raspberry Pi 3b Case

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock

Treedix 3.5inch TFT Touch Screen Module 50Hz 320x480 Resolution LCD Display with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry 4B Pi4

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. Please note that the ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch touch screen has 480 x 320 resolution, with resistive touch control.It supports up to 125MHz SPI signal input.
  • support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom..
  • Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+,4B).
  • This product has passed CE and RoHS certification and support Raspbian/Ubuntu/Kali system, provide driver and image. It can display stable without flicker.
  • The case use split design make it easy to install, protecting your pi computer and screen, and cooling fan with aluminium bracket installed and thermal silicon pad for cooling the chip to keep your pi computer and screen cool always..
Check Stock

Raspberry Pi 3 Armor Case, Raspberry Pi Metal Case with Passive Cooling/Shell Heat Dissipation for Raspberry Pi 3B+/3B

  • ✔ Passive Cooling with housing heat dissipation design, With thermal tapes to tightly touch with on-board Raspberry Pi 3 chipset, No more overheating problem..
  • ✔ Silence without noise with great cooling performance, it can drop temp up to 30-37 ℃..
  • ✔ All ports and slots of the case can match with Raspberry Pi 3 Model B+ /Raspberry Pi 3 Model B perfectly..
  • ✔ Smooth and straight aluminum alloy material, ultra-thin design & easy to install..
  • ✔ Note: There are 4pcs Thermal Tape in the packing. For Raspberry pi 3B+, you just need one big Thermal Tape.
  • For Raspberry Pi 3B, you need two big Thermal Tapes..
Check Stock

MakerFocus Raspberry Pi Case with Fan Raspberry Pi 3 B+ Aluminum Alloy Case with Heatsink and Screw Driver for RPi 3B+ RPi 3/2 RPi B

  • Wide range of use: Support Raspberry Pi 3 B+, 3B, Raspberry Pi 2B+,2B, All ports and slots of the case can match with Raspberry Pi 2b/ 3b/ 3b+....
  • Can be fixed on objects such as walls and desktops: The aluminum alloy casing has two aluminum alloy gaskets, which can be screwed to the wall, table....
  • Aluminum Alloy Material: High hardness, strong pressure resistance, metallic luster, not easy to rust, It can perfectly protect your mainboard.
  • Hole Position Corresponding: The hole design of the housing corresponds to the interface position of the Raspberry Pi motherboard. There are lamp....
  • Warm reminder: If you are a business customer and need to purchase in large quantities, please contact us and we will offer you a discount. How to....
Check Stock

Aluminum Alloy Case for Raspberry Pi 3B+ with USB Switch Cable Fan Heatsink and Screw Driver Raspberry Pi Case for RPi 3B+ RPi 3 RPi 2 B

  • Wide range of use: Support Raspberry Pi 3 B+, 3B, Raspberry Pi 2B+,2B, All ports and slots of the case can match with Raspberry Pi 2b/ 3b/ 3b+....
  • Aluminum Alloy Material: High hardness, strong pressure resistance, metallic luster, not easy to rust, more conducive to heat dissipation. It can....
  • Thermal Performance: The housing can be fitted with a cooling fan and the double-sided hollow design makes the heat dissipation more efficient..
  • Hole Position Corresponding: The hole design of the housing corresponds to the interface position of the Raspberry Pi motherboard. There are lamp....
  • Can be fixed on objects such as walls and desktops: The aluminum alloy casing has two aluminum alloy gaskets, which can be screwed to the wall, table....
Check Stock

GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)

  • Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS.
  • The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws..
  • The aluminum heatsinks has thermal conductive adhesive tape on the back..
  • Package Includes: 1x Cooling Fan, 1x Screw Set, 3x Heatsinks for raspberry pi 3B+/3B/2B/B+,4x Heatsinks for raspberry pi 4 Model B.
Check Stock

Treedix Compatible with Raspberry Pi 3B/3B+/4B GPIO Breakout Expansion T-Type Board with 20cm FC40 40pin Cable Development Board

  • The small board is connected to the 40-pin GPIO connector on the Raspberry Pi, and these pins are assigned to a breadboard-friendly layout and spacing.
  • T-shaped expansion board and breadboard make the experiment more convenient.
  • Using the GPIO expansion board, you can connect all versions of the Raspberry Pi to various sensors and electronic components.
  • Purpose: It can be used for the pin experiment of the experiment board, adding experimental items, etc., and it can be connected to the pin very reliably by simple soldering by yourself. 5. Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
  • Strong compatibility: suitable for Raspberry Pi 3B/3B+/4B, 100% compatible with Raspberry Pi.
Check Stock

SmartiPi Touch Pro - Case for The Official Raspberry Pi 7 Touchscreen Display - with Cooling Fan

  • Works with the Official 7" Raspberry Pi display and Raspberry Pi B+,2B,3B,3A+,3B+, and 4.
  • Includes a cooling fan with rubber vibration mounts.
  • Works with Raspberry Pi HAT boards and has secondary mounting points for your own development board.
  • Raspberry Pi, Raspberry Pi camera, and Raspberry Pi display not included.
  • Port blocking part to cover the Raspberry Pi ports included.
Check Stock

Raspberry Pi HQ Camera Module with Case for Raspberry Pi 4B/3B+/3B/2B/A+/Zero/W/Zero WH,12.3MP IMX477 Sensor Support C- and CS-Mount Lenses, Alternative for Raspberry Pi Camera Module V2 (8 Items)

  • This Raspberry Pi High Quality Camera is the latest camera board from Raspberry Pi Foundation.It is compatible with All Raspberry Pi series boards (Raspberry Pi 4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH,etc.).
  • Higher Resolution & Sensitivity Camera Module---Compared To 8MP Of Normal Raspberry Camera, The High Quality Camera Offers Up To 12.3MP, Along With Nearly 50% Greater Area Per Pixel, Delivering Better Imaging Effect..
  • It adopts the IMX477R sensor, and requires a C- or CS-mount lens to work..
  • It could be an ideal alternative for the Raspberry Pi Camera Module V2. It suits industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity..
  • Package Content: 1.Raspberry Pi High Quality Camera main unit. 2.C-CS adapter. 3.Dust cap. 4.FPC ribbon. 5.Screwdriver. 6.Packing box. 7.Raspberry Pi Zero V1.3 Camera Cable 15cm. 8.Raspberry Pi Camera Matching Case..
Check Stock

SNES Retro Brick Raspberry Pi 4B, 3B, 3B+, 2B Case (209 Bricks), RetroPie

  • Securely fits Raspberry Pi boards 2B, 3B, 3B+, and 4B (not included).
  • Access to power, HDMI, USB, and Ethernet ports.
Check Stock

NES Retro Brick Raspberry Pi 4B 3B 3B+ 2B Case 307 Bricks RetroPie

  • Securely fits Raspberry Pi boards 2B, 3B, 3B+, and 4B (not included).
  • Access to power, HDMI, USB, and Ethernet ports.
Check Stock

Genesis Retro Brick Raspberry Pi 4B 3B 3B+ 2B Case 336 Bricks RetroPie Sega

  • Securely fits Raspberry Pi boards 2B, 3B, 3B+, and 4B (not included).
  • Access to power, HDMI, USB, and Ethernet ports.
Check Stock