Top Raspberry Pi 4b Power Supply

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

ELECROW Raspberry Pi 4 Model B Starter Kit, Raspberry Pi 4b Laptop, Crowpi2 Single Board Computer with Power Supply & Black Case Edition - Basic Kit

  • 【Raspberry Pi 4 Model B Starter Kit】CrowPi2 kit contains all the components the Raspberry Pi 4B needs, NOT including Raspberry Pi 4.
  • 【All-in-one Board】The raspberry pi electronic kit with 22 kinds of sensors and modules are all under one kit, you don't have to wait and wire things, and you can start doing projects instantly and easily with crowpi2.
  • 【Special Design & Excellent Build Quality】Raspberry Pi Laptop is exceptionally well planned, designed, and manufactured. The wireless keyboard detaches from the body or stays connected via a magnet. Crowpi2 can be used as a small personal computer, which can be put into a laptop bag and taken anywhere that you want to go.
  • 【Programming Lessons】This raspberry pi 4 b learning kit ships with step-by-step instructions and provides 76 lessons to take you through identifying components reading code and running it in the terminal. And 18 small games for you to explore. Crowpi2 is a revolutionary device that is just as suitable for novices as it is for experts, it is the right choice for kids and adults.
  • 【Package Included】1 x CrowPi2, 1 x Raspberry Pi 4B 8G, 1 x 128G TF card with Customized system, 1 x 32GB TF card with RetroPie system, 1 x TF card reader, 1 x 12v power supply, 1 x IR receiver,....
Check Stock

Treedix 3.5 inch TFT Touch Screen Module 320x480 Resolution LCD Display Compatible with Raspberry Pi 4B/3B/3B+ with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry Pi 4B

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. The ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch LCD touch screen has 480 x 320 resolution, with resistive touch control.
  • The LCD touch screen can use GPIO interface for power supply.
  • The LCD screen has a 2-pin interafce for connecting the cooling fan, which can allow the screen and cooling fan both working at the same time..
  • The LCD touch screen is suitable for Raspberry Pi 4B/ 3B/ 3B+ versions. When used for Pi 4B, it can support for Raspbian system, for kali Linux system. When used for 3B/3B+, it can support for Raspbian system, for ubuntu system ,for kali Linux system..
  • The case features an easy-to-install split design that protects your PI computer and screen, as well as a cooling fan mounted on an aluminum stand and a hot silicon pad for cooling the chip to keep the PI computer and screen cool..
Check Stock

Treedix 5V 3A USB Type C Adapter Charger Power Supply Micro USB Interface Cable with ON/Off Switch Compatible with Raspberry Pi 4 4B

  • The power charger is specifically designed and tested for the new Raspberry Pi 4 4B, offering maximum stability and reliable operation..
  • Quality assurance-the adapter is manufactured using the highest quality materials and is protected against incorrect voltages, short circuit, and internal overheating.
  • The 3.3A current can provide enough current to ensure that the Raspberry Pi can operate properly during the complex experiment at each station..
  • Multiple protection designs: over voltage protection, under voltage protection, short circuit protection, over heat protection, over current protection.
  • The power supply with ON/OFF switch for easy control of charge status of your Raspberry Pi and can effectively reduce wear and tear of the Raspberry Pi power port caused by plugging..
Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Check Stock

iUniker Raspberry Pi 4 4GB Starter Kit - 32GB Edition Raspberry Pi 4 Case Aluminum Case 20W 5V 4A Raspberry Pi 4 Power Supply with ON/Off Switch HDMI Cable for Pi 4B 4GB RAM

  • Includes Raspberry Pi 4 4GB Model B with (4GB RAM).
  • This Raspberry Pi 4B case is a Passive Cooling Aluminum Case.
  • 5V 4A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on/ off your Pi.
  • Power supply with Professional Certification: TUV, RoHS Certification.
  • 32GB High Speed Class 10 Card with Card Reader, Support All of the OS for your Pi.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)

  • Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
  • X825 Case,please refer to ASIN: B093WYWVRX.
  • Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
  • OS compatiable: All Raspberry Pi operating systems.
  • USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
  • Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
  • Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.
Check Stock

Geekworm Raspberry Pi 4 Power Supply, 20W 5V 4A USB C Power Adapter Type C Fast Charger UL Listed Support Raspberry Pi 4 Model B/NASPi/DACPi/X-C1/X825/X735/X728/X708/X706/X703/X930

  • Geekworm Raspberry Pi 4 Model B Power Supply, USB C Type C power adapter designed and tested for the Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB Version. Also support NASPi / DACPi /X-C1/ X825 / X735 / X728 / X708/ X706 / X703/X930 expansion board/Retroflag PiStation Case..
  • Power Input: 100-240V AC, 50-60Hz, 0.8A Max. Output: 5V 4A 20W. Cable length: 1.2 m / 47.24 inches.
  • Raspberry Pi 4B Power Adapter with UL Listed Certification - UL Listed..
  • Power Supply Functions: Over voltage protection.
  • Packing List: 1x 5V 4A US Plug Type-C Power Supply.
Check Stock

GeeekPi Mini Tower UPS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, Raspberry Pi UPS Plus Hat, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • Support OLED display, UPS Plus integration, ICE Tower Cooler integration..
  • The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information..
  • The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃..
  • The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources..
  • Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in ....
Check Stock

UCTRONICS Raspberry Pi Cluster Case, Desktop Metal Rack Case, 4 Layers with 2 Cooling Fans Compatible with Raspberry Pi 4B and 2.5\ SSD

  • For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+.
  • Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations.
  • it allows you to add additional storage to your Raspberry Pi whenever and wherever you want, making it easy to build Raspberry Pi clusters and Raspberry Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • Side Opening Design: you can easily position the Raspberry Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and raspberry pi PoE+hat..
  • Made of metal aluminum, Size: 4.13*4.84*7.12inch.
  • the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking..
  • Easy to install: The case is not pre-assembled and requires simple installation once you get it in your hands. Each mounting plate uses M4 hand screws, making it easy to remove and install one of the units without a screwdriver..
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock