Top Raspberry Pi Case Fan

Smraza Case for Raspberry Pi 4 Model B, Acrylic Case with Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4B (RPI 4 Board Not Included) - Black and Clear

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: This case is not suitable for raspberry pi 3..
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 B COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display

  • Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
  • Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
  • Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
  • With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
  • With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.
Check Stock

iUniker Raspberry Pi 4 Case, Pi 4 Case with Dual Fan Rpi4 Case with Cooling Fan with Raspberry Pi Heatsink, Simple Magnetic Removable Case for Pi 4 Model B/ 4B (Clear New)

  • Very Easy to Set up - New Design Raspberry Pi 4 Case with Magnet Makes your Pi Case Easy to Install without any Screws..
  • Good Cooling Performance with Dual Active Cooling Fan Design - Your Pi case can emit heat directly to the air and turn off your Pi's TEMP with dual cooling fan and 4 heatsinks. It can provide double effect for your Pi..
  • New Layers Arcylic Panel Design - The acrylic made by the latest technology is thicker and stronger. The transparent material allows you to see the indicator light status of your Raspberry Pi at any time..
  • Unique Raspberry Pi Case - It can make your Pi look cooler and quieter than others..
  • Note: Raspberry Pi 4 board is not included..
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

GeeekPi Mini Tower UPS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, Raspberry Pi UPS Plus Hat, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • Support OLED display, UPS Plus integration, ICE Tower Cooler integration..
  • The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information..
  • The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃..
  • The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources..
  • Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in ....
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

  • Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock

NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)

  • 4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
  • Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
  • Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
  • Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
  • Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
Check Stock

GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)

  • Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....
Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

  • 【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
  • 【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
  • 【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
  • 【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
  • 【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Pi 4B Case with Quiet Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB - Black

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal.
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

Treedix 3.5inch TFT Touch Screen Module 50Hz 320x480 Resolution LCD Display with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry 4B Pi4

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. Please note that the ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch touch screen has 480 x 320 resolution, with resistive touch control.It supports up to 125MHz SPI signal input.
  • support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom..
  • Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+,4B).
  • This product has passed CE and RoHS certification and support Raspbian/Ubuntu/Kali system, provide driver and image. It can display stable without flicker.
  • The case use split design make it easy to install, protecting your pi computer and screen, and cooling fan with aluminium bracket installed and thermal silicon pad for cooling the chip to keep your pi computer and screen cool always..
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock