Top Raspberry Pi Magnetic Door Sensor

LoveRPi Ultra Wide Angle Camera for Raspberry Pi 4/3/2/Zero W (5MP, 220 FOV)

  • ULTRA WIDE ANGLE 220* CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for ultra wide angle, low latency, and high quality imaging required for computer vision, streaming media, and remote data acquisition..
  • INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications..
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions..
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in "sudo raspi-config.
Check Stock

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4

  • for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
  • High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
  • Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
  • 5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
  • Connect the included ribbon cable to the CSI (Camer....
Check Stock

Argon ONE M.2 Aluminum Case for Raspberry Pi 4 with Power Button and Fan | SATA SSD Support | B-Key and B+M Key Compatible

  • Most powerful Raspberry Pi 4 case with M.2 SATA SSD Carrier Board, Power Button, Controllable Internal 30mm Fan & IR Sensor.
  • Integrated with M.2 SATA Expansion Kit for use with M.2 SATA SSD B-Key or B+M Key.
  • power and transfer via USB 3.0 Port. With safe shutdown power button & software controllable 30mm fan..
  • Keeps RPI 4 cooler with aluminium case enclosure and heatsink. GPIO access via removable magnetic cover..
  • Neat cable management. Easily connect power cable, two (2) full sized HDMI display ports, GPIO accessories and comes with built-in IR..
  • Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..
Check Stock

Arducam Raspberry Pi Camera Module 3 Wide, 120°(D) IMX708 Autofocus Pi Camera V3 with Acrylic Case, 15cm 15-22 Pin FFC Cable

  • Compatible with all Raspberry Pi boards: Raspberry pi camera v3 works with all Raspberry Pi models, 4B/3B, Pi Zero W/2 W..
  • Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images, 1080p50 max for video..
  • The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images..
  • Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration..
  • Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero 2 w.
  • also an acrylic camera case included, easily mount on any tripod with 1/4"-20 mounting screws..
Check Stock

Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4, 3 B+, 3B, 2B, Pi Zero RPi Infrared Night Vision

  • NEW RASPBERRY PI CAMERA MODULE V2: MX219 8-megapixel sensor with fixed focus lens, which is not only a resolution upgrade, but also a leap forward in image quality, color fidelity, and low-light performance..
  • HIGHER RESOLUTION: NOIR Camera V2, Capable of 3280 (H) x 2464 (V) still picture resolution and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes. No infrared filter, supports night vision..
  • BETTER COMPATIBILITY: This RPi camera module supports all models of Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi 2 and 1 and Jetson Nano Developer Kit..
  • WILD APPLICATION: This pi camera can be used to take high-definition videos as well as still photographs. It can capture IR photographs, better performance in the night and low light vision, especially suitable for wildlife photography, home security and surveillance, NDVI in agriculture, etc..
  • PACKAGE LIST: An 8mp Raspberry Pi official NOIR camera V2 with a 15cm original FFC cable..
Check Stock

High-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate Onboard DAC8532, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules.
Check Stock

OctagonStar 18pcs Raspberry pi 2 B+ Sensor Module Board Package 18 Kinds of Sensor Set kit

  • 18 Sensor Module Kit for Raspberry Pi 2..
  • OctagonStar Quality Assurance.Item package or product surface have OctagonStar brand identity..
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

Raspberry Pi 4 Portable Laptop, CrowPi-L Programming Kit, Built-in Battery and Fan, Python and Graphical Programming Learning, Switchable Dual System (RPI not Included)

  • 【Real Raspberry Pi Laptop】CrowPi-L is a cost-effective custom laptop designed for Raspberry Pi enthusiasts, for the learning of programming education. ​It integrates almost all peripheral accessories of Raspberry Pi. This Learning kit does NOT include a Raspberry Pi, please purchase Raspberry Pi 4B 8GB/4GB yourself, sorry for the inconvenience..
  • 【Getting Started with Programming】Whether you are a beginner in programming, a Raspberry Pi enthusiast, or a programming teaching school, CrowPi-L is a good choice for you. It is not only a laptop, but also a learning kit that integrates office, entertainment and programming..
  • 【Rich Programming Courses】CrowPi-L provides you with rich, systematic and progressive programming courses that make it easier to learn Letscode graphical programming and Python programming, whether you are a beginner or an advanced programmer..
  • 【Built-in Battery】We have collected the opinions of many CrowPi2 users and Raspberry Pi enthusiasts, and the new generation of CrowPi-L will be completely remodeled with a built-in 5000mAh battery, which supports the device to work independently for 3 hours..
  • 【Dual System Switching Function】CrowPi-L has a dual-system switching adapter board independently developed, which can ins....
Check Stock

SunFounder Raspberry Pi Car Robot Kit 4WD HAT Module Ultrasonic Sensor Velocity Measurement Module etc Electronic DIY Robot Kit for Teens and Adults Raspberry Pi/TF Card/Battery not Included

  • 【STEAM ROBOTICS CAR KITS】The Raspberry Pi smart car kit is an educational STEAM product for beginners (12+ Teens) to learn Raspberry Pi....
  • 【PROGRAMMING LANGUAGES & VARIOUS Modules】Raspberry Pi robots can be programmed in Python. The device includes four sensor modules, including a 4WD....
  • 【MULTIPLE FUNCTIONS】SunFounder 4WD Smart Car multifunctional functions include Obstacle Avoidance, Object Following, Line Tracking, Cliff....
  • 【WEB CONTROL】You can control the Raspberry Pi Car from the web using your Android or iOS smartphone, as long as you have an active internet....
  • 【Professional Support & Online Tutorials】We have 10 years of Raspberry Pi programming experience, and our technical support and customer service....
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: Compared with Raspberry Pi Camera Module V2, this camera module offers higher resolution, up to 12.3MP. Also adopting 12.3MP IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vis....
Check Stock