Top Rc Lipo Charger

HOOVO 7.4V 70C 6200mAh 2S Lipo Battery Hard Case with Tracxas Plug for RC Car RC Helicopter RC Truck RC Truggy Airplane Quadcopter UAV Drone FPV (2 Packs

  • ...e (150 times at least), up to 235Wh/kg energy density. More run time, more fun time..
  • Configuration: 2S1P. The plug is an old version and may not fit the Tracxas Charger. Using genuine brand lipo balance charger,never leave battery unattended when charging..
  • 【Parameter】- 2S Lipo Battery Dimension(±2mm): 139*47*25mm / 5.47*1.85*0.98inch (L*W*H).
  • 【Application】- This 2S lipo battery compatible for Tracxas models 1/10 1/8 scale vehicles, such as RC airplane, RC helicopter, RC car, RC truck, RC boat, drone, FPV, Bandit, Rustler version, Losi, Axial, Tamiya, Duratrax, and more. (Only if the voltage, dimension and the plug match, then it will fit).
  • 【Professional and Reliable】 - HOOVO Lipo Battery with the most advanced production technology and strict QC teams, our Lipo batteries provide steady discharge curve, high discharge rate to reach the top speed with the most stability and power your RC hobbies. Please let us know if yo....
Check Stock

Blomiky 2-in-1 2S 7.4V 1000mA Li-ion/Li-po Battery Balance Charger Cable for RC Boat Airplane Helicopter Trucks Cars 2S Lipo Battery 7.4V 1 to 2

  • 2 in 1 XH-3P charge port, 2 charge dincator for 2 charge port, 1 indicator for 1 charge port. Charge port :XH-3P white 3 pin connector. it can charge 2 2S 7.4V Li-ion or Li-Po battery at same time,.
  • Only can charge 7.4V 2S lithium Li-ion or Li-polymer battery, advise battery capacity is less 2000mAh, It take 5-7 hours to charge full 2000mAh battery..
  • Balanace charger cable built-in over-charged,over-volatge, over-heat protection IC circuit board, green light is blink when charging, green light stop blink after full charge. red light.
  • 7.4V 1A 2S Lipo battery charger cable fit for RC Drone RC Quadcopter 7.4V 2S Lipo or Li-ion Battery,which use same XH-3P Charger plug..
  • 7.4V 1A 2S Lipo battery charger cable fit for RC Truck Cars vehicles buggy 7.4V 2S Lipo or Li-ion Battery,which use same XH-3P Charger plug..
Check Stock

REPLACE PARTS FOR Promark P70 VR Drone (BATTERY AND CHARGER ) FOR Promark P70 VR Drone (walmart.com) AND P70-CW Drone

  • Battery discharge plug: red round banana plug. and attenstion: Red cable is positive, Black cable is negative. Charger plug: XH-3P.
  • Battery dimensions:90*35*16mm/3.56*1.35*0.63 inch. Upgrade capacity,real capacity is 2000-2100mAh. Voltage is 7.4V, Lipo rechargeable battery..
  • Please charge full the battery before use. 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacment for Promark P70 RC Quadcopter Drone, battery replacement for S yma X8C X8W X8G X8HC X8HW X8HG X8 RC quadcopter drone..
  • 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacement for Vivtar DRC-446 RC Quadcopter Drone with Camera.
  • 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacement for RC Car truck RC vehicle ,RC Quadcopter drone ,RC helicopter, RC Aircraft and RC Buggy, which use same battery voltage size and plug..
Check Stock

LiPo Charger Balance Fast Charger Discharger B6V2 Digital Battery Pack Charger for 1S-6S LiPo LiHV Life Li-ion NiCD NiMH PB Smart Battery RC Car

  • ✌{VARIETY BATTERY CHARGING} Our B6V2 RC BATTERY CHARGER is upgrade version of B6 charger, it can support a variety of battery types: LiPo, LiFe,....
  • ✌{MULTI-MODES} The 80W 6A DC11V-18V battery charger has charge mode, discharge mode and balance mode, with the charge mode and discharge mode, you....
  • ✌{MULTI-FUNCTIONS} Except charge mode, balance mode, and discharge mode, this rc charger also has other functions: terminal voltage control.
  • ✌{WIDE VOLTAGE COMPATIBILITY} The rc battery charger can charge LiPo: 1-6 cells, LiFe: 1-6 cells, Li-ion: 1-6 cells, LiHV: 1-6 cells, NiMH:....
  • ✌{PACKAGE CONTENT} 1*B6V2 RC Battery Charger.
Check Stock

BGUAD Lipo Battery Charger 1350W 25A 1-12S Multi Function Intelligent Touch Screen Lipo Balance Charger Discharger for LiPo LiHV Life NiMH NiCd Pb for RC Car Truck Boat Racing

  • 【Charging/Discharging】The lipo charger with balance supports charging and discharging function with 12s Lithium Polymer battery with the included 12s balance adapter board and XT90 connector. The DC input charger has high power 1350W and charge current 25A..
  • 【Touch Screen Display】Simple to operate, monochrome touch screen shows more information, visible under sunlight. User can check the current, charging capacity, cell voltage, charging time, battery resistance, etc during charger working..
  • 【Applicable to Various Batteries】The rc lipo charger is a full-featured high-power charger perfect for LiPo/LiHV/LiFe(1-12S) NiMH/NiCd(1-20cells) Pb(2-20V) for RC Car Truck Boat Racing Airplane Helicopters UAV FPV Airsoft Quadcopter Drone. Only possession of this BGUAD charger you can charge for all battery packs..
  • 【Multiple Functions】The ultra pro rc charger features program data save/load, end voltage controlled, Lithlum battery storage, capacity statistic, temperature sensor, charge/discharge function, safely timer. This powerful combination of charger & power charger is neat way to get a lot of barreries charging!.
  • 【Protection Function】BGUAD A9 not only a regular digital balance charger, it also have a lot of safe function such as over current....
Check Stock

EBL 1S-6S Lipo Battery Charger Balance Charger Discharger RC Battery Charger for Li-PO/NiMH/NiCD/Li-Fe/LiHV/Li-ion Battery Packs with Deans/Tamiya/JST/EC3/HiTec Connectors Cable Power Supply

  • Support Multiple Types of Battery Packs - The lipo balance charger support LiPo/Li-ion 3.7V-22.2V (1S-6S), with voltage capabilities such as 7.4V, 11.1V, 14.8V. NiMH/NiCD 1.2V-18V (1A-15S), with popular options of 6V, 7.2V, 9.6V, 12V. LiFePO4 3.2V-19.2V (1S-6S), with popular options of 9.6V, 12.8V, 16V. SLA (2-20V). Please choose the right type of battery when charging..
  • Wide Connector Compatibility - The rc car charger comes with an octopus cable, which has Deans(T plug), EC3, JST, Futaba, mini Tamiya, Tamiya connectors. These connectors are matched almost all popular RC batteries connectors. No need to buy other cables separately..
  • Load with Multiple Advanced Functions - The rc battery charger includes features like LiPO, Li-ion, LiHv, and LiFe balance charging, fast charging, cyclic charging, data storage, discharging, and much more extra function for all of your hobby battery packs..
  • High Quality & Safe - This lipo battery charger has been strictly processed with better quality, and the charger built in an advanced smart chip can accurately control the charging parameters of the charger to avoid over-current, over-discharge, over-voltage, and short-circuit..
  • What You Get - 1 x EBL Balance Battery Charger, 1 x Multi-Charging harness, 1 x Clear User Ma....
Check Stock

Hitec RCD Inc RDX2 Mini AC Balance Charger HRC44299

  • ★【Upgrade Balanced Dual Charger】The dual lipo battery charger is upgrade version of C150, It has two separate channels, which can charge two....
  • ★【Charge Various Batteries 】Widely used in various batteries, 3.7 V to 22.2 V(1s-6s) LiIon/LiPo/LiFe/LiHV, 1.2V-18V(1s-15s) NiMH/NiCD, 2-20V PB....
  • ★【Terminal Voltage Control】The rc lipo battery charger is allowed to set the charge/discharge voltage. Full plastic shell, safe, compact,....
  • ★【MAX SAFETY】 dual lipo charger-Low input voltage limit, automatic charge current limit, Delta-peak sensitivity, capacity limit, processing time....
  • ★【What You Get】-1* C240 charger, 2* Charge cable banana plug to T-Plug, 2* Extension charge cable T-Plug to XT60, 2* balance board with pin....
Check Stock

Lipo Battery Charger, 1S-6S Balanced Charger Discharger, 1-6S Lipo Li-ion NiMH NiCD Li-Fe Battery with Tamiya XT60 Deans Futaba Connector

  • Support Battery Packs - The RC battery charger is ideal for all hobby battery packs, compatible with various kind of RC toy battery, like RC drone, RC car, RC Robot, RC boat and for airsoft , support like LiPo 3.7V-22.2V (1S-6S), Li-ion 3.6V-21.6V (1S-6S), LiFePO4 3.3V-19.8V (1S-6S), NiMH/NiCD 1.2V-18.0V(1S-15S),SLA( 2V-24V)..
  • More connector types- This RC battery balance charger is compatible with almost all popular RC battery connectors, like Tamiya, Deans, XT60, Futaba connectors. Conveniently, you don't need to buy other cables separately..
  • Multiple advanced functions - More than a regular Lipo battery charger, it comes with features like balancing charging, fast charging, memory storage&load, cyclic charging&discharging, warning and error message, processing time limit, and much more information in the program..
  • Package included - 1×V6 battery charger.
  • 1×T-Crocodile Clipe;1× XT60 Plug;1×4mm to Deans Charge Cable;1×Timiya cable.
  • Wide voltages compatibility - Work with voltages ranges from 1.2 volts to 18 volts for nickel-metal hydride or nickel-cadmium battery packs, and Lithium battery packs with voltages from 3.7 volts to 22.2 volts..
  • Higher safety standards- This multi-batt....
Check Stock

Venom Pro 2 LiPo Charger | AC DC NiMH and Lithium Battery Charger Discharger | with XT60, HXT, to EC3, JST, Deans Connector, Alligator Clips, Tamiya Charger for Your RC Battery Charger Needs

  • Covers All Your RC Battery Voltage Requirements - Use this Venom Pro 2 balance charger on 1S to 15S NiMH/NiCd, 1S to 10S Lead PB Battery, and the most popular Lithium 1S to 6S LiPO / Li-ion / LiFe Battery, with a charge current of 0.1 to 7A and voltage range of 7.4V, 11.1V, 14.8V. LiFePO4 3.2V-19.2V (1S-6S), and other options of 9.6V, 12.8V, 16V. SLA 2V-20V.
  • Advanced Features Built For Convenience | Comes with our advanced multiple functions such as multiple discharge profiles, fast charging, internal resistance testing, and memory recall profiles and data storage for up to five of your most commonly used batteries..
  • Compact & Ultra Portable for Your On The Go Needs | The light and easy to carry Venom Pro 2 NiMH Pb LiPo battery charger discharger's compact design is ultra-portable, making it easy to bring to you all of your RC activities, indoors or outdoors..
  • Comes with Complete Accessories | This balance charger comes with seven of the most popular charging leads compatible with XT60, Deans, EC3, Tamiya, Receiver Pack, JST, EC5, Glow Plug, and Alligator clips for trouble-free connections. Use it for your 1S, 2S, 3S, 4S, 5S, 6 LiPo batteries, as a charger, drone charger, airsoft battery charger, 9.6-volt rechargeable battery charger, and your other RC ....
Check Stock

HOOVO Lipo Battery Charger RC Balance Charger Discharger for LiPo/Li-ion/Life Battery(1-6S), NiMH/NiCd (1-15S), RC Hobby Batteries Balance Charger with LCD Display

  • 【Multiple Battery Pack Compatibility】:HOOVO B6 RC Battery Charger is compatible for multiply batteries, such as NiCd/NiMH batteries, Li-ion batteries, LiPo batteries, LiFe batteries, LiHV batteries and Pb batteries. LiPo/Li-ion: 1S-6S(3.7V-22.2V).
  • LiHv: 1S-6S battery packs can be charged or discharged by the balance charger..
  • 【Muti-modes Charger】B6 RC battery charger has charge mode, discharge mode, and balance mode for chioces. it has a built-in independent battery balancer, which can individually monitor and balance each battery cells. with balance mode,you don’t need to adjust the voltage or current. It is convenient and easy to use..
  • 【Multiple Advanced Functions】Except charge, balance and discharge,it also have fuctions Like Data Storage, Memory Loading,Cyclic charging & discharging ,warning and error message, Processing time limit, and much more information in the program for all of your hobby battery packs. ..
  • 【High quality & Safe 】This multi-battery charger is built in an advanced smart chip which can accurately control the charging parameters, avoid over-current, over-discharge, over-voltage, and short-circuit. HOOVO lipo charger has been strictly processed to rea....
Check Stock

Blomiky 15V Wall Charger with 11.1V XH-4P Plug Balance Box for 11.1V 3S Li-ion or Lipo Battery 15V Charger

  • Charger Plug: XH-4P white 4 pin connector. 11.1V 3S Li-ion or Lipo Battery Charger fit for ZEE Socokin Ovonic E-flite Tattu HRB AWANFI HOOVO 11.1V 3S....
  • Power Adapter Input:100-240V,50/60Hz, Output:15A--800mA, Charger fit for Gens ace Tattu Zeee 11.1V 1500mAH 2200mAH 3000mAh 5200mAH 3S LiPo Battery..
  • Balance Charger:3-Cell 11.1V LiPo balance Charger, Input:DC 15V Output:11.1V 0.8A. XH-4P Port.
  • Charger and Balance Charger fit for 11.1V 3S Floureon Gens ace TATTU Zeee HRB OVONIC 11.1V 3S 1300mAH 1500mAh 2200mAH 3000mAh 4000mAh 5000mAh 5200 mAh....
  • 15V DC Input for 3-Cell 11.1V 0.8A 3S LiPo Battery Power Adapter and balance Charger for RC Vehicle Drone Boat 11.1V XH-4P Charger.Charger power....
Check Stock

Zeee 4S Lipo Battery 6200mAh 14.8V 120C Hard Case Battery with Deans T Connector for Car Truck Tank RC Buggy Truggy RC Models(2 Pack)

  • 【Zeee 4S 6200mAh RC Lipos Specification】- Battery Voltage: 14.8V.
  • 【4S RC Lipo Dimensions】- Zeee 6200mAh 4S lipo dimension is: 138*47*48mm/5.43*1.85*1.89inch(L*W*H).
  • 【Application】- Zeee 6200mAh 4S RC Lipo battery compatible with professional 1/10 scale and 1/8 scale RC car hobby models, Bandit, Rustler version, Losi, Team Associated, etc. (Only if the voltage, dimension and the plug match, then it will fit)..
  • 【Safety Warning】- 1. Users must read safety manual before use of the battery.
  • 2. You must use Lithium Polymer(LiPo) specific charger only.
  • 【What You Get】- 2 Pack of Zeee 14.8V 120C 6200mAh Lipo Battery Hard Case with Deans T Connector. Any product problems, please Contact US: 1. Enter into "Your Orders" to click "Contact Seller" option.
  • 2. Click "Ask a question" on our storefront. We will get back to you within 24 hours..
Check Stock