Top Rc Nitro Gas Car

HSP 1:10 Scale High Speed 65km/h 4WD Off-Road RC Car 2.4Ghz Remote Control Truck,Radio Controlled Off-Road Racing Car Monster Truck RTR

  • 【Warm Tips for 1:10 Large Scale RC Buggy】This HSP RC Car is a 1:10 Scale big size and full proportional super-fast cross country vehicle. Please note this is Nitro Power Car, designed for RC fans, we suggest professional RC fans over 17 years of age buy this racing car. Because it is difficult for a beginner. If you are new to RC Cars, you may need to check lots of videos on youtube before you start it..
  • 【4-Wheel Drive RC Car】Realistic drift car body, Hard drift tires, Shaft drove 4 Wheel drive. The four wheels will give support to unexpected dropping and the unstable surface of the ground. Please note this is Nitro Power Car, does not have a reverse..
  • 【40+Mph Amazingly Fast】13.8g super-light-weight flywheel. The max speed is up to 40+Mile/h. Pre-trimmed V-tread durable tires, which let you go both off-road and on-road environments. Extra-large capacity leak proof fuel tank with the overflow pipe and spring load fill cover for quick re-filling. Fiberglass Disc brake system with user replaceable pads provides quick brake response..
  • 【2.4Ghz Accurate System】With With a range of up to 100m/338 ft and 2.4Ghz highly responsive steering and throttle, you can race with your friends or kids at the same time. We also offer 60-day parts replacement....
Check Stock

RadioLink RC4GS V2 2.4G 4CH RC Transmitter and Receiver R6FG Gyro Inside Pistol Grip Remote Controller for RC Car Boat Tank Buggy

  • 1) Built in Gy: Built-in gyro can keep the vehicle in a straight line, and Gyro sensitivity can be adjusted by the transmitter's VR switch, which fits for drifting car and on-road cars..
  • 2) Excellent Anti-interference: With pseudo random FHSS algorithm, which makes RC4GS with excellent anti-interference ability, control range up to 1300 feet (400 meters)..
  • 3) Dual Programmable Mix Control: Mix control can be programmed with any two channels and each channel can be customized. That's friendly for twin-engine vehicles, such as tanks, boats, 4 wheel steering car..
  • 4) Powerful Function: EPA, ABS, fail-safe, D/R, IDLUP, low power alarming, subsidiary ID(control multiple receivers separately),etc. CH3-CH4 can be customized to VR and tact switch..
  • 5) Adapts to Most of Types Vehicles: with 10 models memory, each model can be set up and named separately. It is suitable for RC rock crawler, monster truck, buggy, gas powered, nitro, on/off-road RC car, etc..
Check Stock

TAMIYA Polishing Compound Fine and Finish SET

  • This item works with: Associated Apex Touring V-Type, RC-12R5.x, TC-3 Nitro Sedan.
  • HPI Electric E10, Sprint 2, Sprint 2 Flux.
  • Kawada Sigma 2 1:10 touring, Sigma DC 1:10 Drift.
  • Kyosho Fazer GP 1/10, GT Inferno Sedan, Spider MK2, TF2 Spider EP.
  • Mugen MTX-3 1:10 Nitro Touring, MTX4R 1:10 Nitro Touring.
  • RJ Speed Digger, Legends, Nitro Dragster, Nitro Funny Car.
  • Tamiya TA01, TA01 FF, TA02, TA02W, TA03, TA04, TA05, TL01.
Check Stock

Onroad RC Cars PractIcal Upgrade & Maintenance: 2020 Edition

  • Compatible with HSP 1/10 nitro on-road car buggy truck.
  • Fits all nitro rc car, compatible with Redcat Racing Lightning, Tornado, Tsunami and Volcano 1/10 models cars.
  • Replacement Parts NO.:02004,a great replacement part..
  • Size:52x35x66mm(LxWxH),easy to install and replace..
Check Stock

Globact 4pcs 70117 Hot Glow Plug N3 No. #3 Spark Nitro Engine Parts Replace OS for Traxxas Kyosho HSP HPI Redcat 1/8 1/10 RC Car Truck Buggy

  • Glow plugs nitro rc compatible with:Traxxas T-maxx 3.3, TSUNAMI, VOLCANO STX, TORNADO S30, VOLCANO S30, AFTERSHOCK 21, HURRICANE XL, AFTERSHOCK 3.0, AFTERSHOCK 3.5, BACKDRAFT 3.5, CALDERA 3.0, EARTHQUAKE 3.0, EARTHQUAKE 3.5, HURRICANE XP, LANDSLIDE 21, LANDSLIDE LT, MAELSTROM LT, MONSOON XP, SANDSTORM 21, SANDSTORM LT, TWISTER LT, TYPHOON XP, REACTOR RS 3.3, VOLCANO MX, VOLCANO SV, VOLCANO T2, VORTEX SS, TORNADO BB..
  • Glow plug igniter:Hot 70117 Platinum/Iridium Super Spark Glow Plug N3 for RC Nitro Engines Car Truck Buggy..
  • RC glow plugs longer lasting Element, For 4c Engines 5% - 40% Nitro Fuels..
  • Improves idle and transition , Longer lasting element..
  • If you have any questions about purchasing our Globact glow plug,please feel free to contact us, we will definitely give you a satisfactory answer!.
Check Stock

RC Spark Glow Plugs, RCPLAGA 10PCS 70117 Hot Spark Glow Plug No.3 N3 Hot Nitro Engine Parts for HSP 1/8 1/10 TRX RC Nitro Engines Car

  • 【Applied to】: The RC Spark Glow Plug are suitable for 1/10 1/8 RC Nitro Engines Car Truck Buggy..
  • 【Advantage】: Longer Lasting Element, For 5% - 40% Nitro Fuels. Improves Idle and transition,Hex Size: 8mm/0.3inch..
  • 【High Quality Material】: The RC Hot Glow Plugs are made of high-quality steel material, wear-resistant, durable,and designed for long-lasting performance..
  • 【Easy to install】: The RC Hot Glow Plugs are easy to install and disassemble, and replace old or damaged parts..
  • 【Package include】: 10 Pcs N3 Spark Glow Plug..
Check Stock

Hobbypark 2PCS Aluminum Fuel Tank Air Cooler Fuel Back Pressure Cooling w/Tubing Engine Parts for 1/8 1/10 RC Nitro Car Truck Off Road Buggy Traxxas Redcat HSP HPI Axial Purple

  • ✔Compatible with: Mostly Brands 1/8 1/10 Scale Traxxas Redcat HSP HPI Axial Himoto RC Nitro Car Truck Off Road Buggy.
  • ✔How to work: cooling the gas filled into the fuel tank, so that the temperature of the fuel is not so high,lower the working temperature of the....
  • ✔Made of Aluminum Alloy,offering good heat dissipation performance..
  • ✔Pack of 2 (Tubing Included),100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service..
Check Stock

2PCS ShareGoo Aluminum Fuel Tank Air Cooler Fuel Back Pressure Cooling Compatible with HPI HSP Redcat Traxxas Axial Himoto 1/8 1/10 Rc Nitro Engine RC Car Off Road Monster Truck

  • Package includes 2PCS tank air cooler.Compatible with HPI HSP Redcat Traxxas Axial Himoto 1/8 1/10 nitro engine rc car truck.
  • Made of aluminum alloy material,has good heat dissipation performance..
  • How it works:When the exhaust gas passes through the back pressure cooling pipe, it can cool the gas filled into the fuel tank. Then the temperature....
  • Color: Purple,easy to install and upgrade..
Check Stock

Aluminum Capped Air Filter Element Sponge 04104 Upgrade Parts Compatible with HSP Traxxas Himoto Redcat RC 1/10 Nitro Truck Buggy (Purple)

  • This is 04014 upgrade parts rc air filter cover for 1/10 RC scale car truck, which will filter almost impurity in the air and help your RC car's engine functioning smoothly and stable.
  • Compatible with 1/10 RC nitro power 4WD 94102 On-road touring 94106 off-road Buggy 94108 monster buggy.
  • Replacement Part No.: 04104,great replace your old or broken air filter..
Check Stock

Hobbypark Aluminum Front Bulkhead Upgrade Parts for 1/10 Traxxas Slash 2WD Rustler Stampede Bandit Replace 2530 2530A, Navy Blue Anodized

  • ✔These are OEM Hop-Ups for 1/10 2WD Traxxas Slash(VXL) / Rustler(VXL) / Stampede(VXL) / Bandit(VXL) / Ford F-150 Raptor / Nitro Slash / Nitro Rustler RC Car, Consult your user's manual for exact parts listings..
  • ✔Come with Hardware(As shown),Easy upgrade from the original part.
  • ✔Made of Aluminum Alloy,Anodized,CNC machined,High precision.
  • ✔Package Include: 1 Piece (As shown in the pictures).
  • ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable.
Check Stock

Globact 2 Pcs R020 Pull Starter for 1/10 HSP Himoto Redcat Tyranno Vertex 16 18 SH 21 Nitro Engine

  • This is a 1/10 R020 pull starter,suitable for HSP RC 1/10 Nitro Car Engines Parts Tools..
  • Suitable for HSP, HIMOTO, REDCAT & TYRANNO with CXP 18, VX 16 18 and SH 21 Nitro Engines..
  • For 12mm Across Flat One Way Bearing, with 6mm shaft diameter..
  • Please be notice this pull starter is not suit for all 16-21 Nitro Engines, please make sure the size suit for you before order it..
Check Stock

GLOBACT Glow Plug Ignitor Igniter Nitro Igniter Starter Tools with Battery Charger for 1/8 1/10 Nitro Engine RC Car Buggy Truck Model

  • Exquisite and compact design: Light weight and easier for operating, storing and carrying.
  • Stable material: These RC glow plug igniters are made of quality aluminum alloy, compact and durable to use, not easy to break..
  • Rechargeable design: Come with battery charger, brings much convenience, easy to use. Rechargeable 1.2V 1800mAh Ni-Cd battery..
  • Wide compatibility: Suit for HSP RedCat 1/8 1/10 nitro car..
  • Nitro RC Starter Kit: 1 * Glow Plug Igniter,1 * Battery Charger (US Plug),1 * 1.2V 1800mAh Ni-Cd Battery (Built-in).
Check Stock