Top Rca Noise Filter

200W 15A RCA Noise Suppressor - Designed for Audio Signals & to Eliminate Noise, Isolation Transformer, Used w/ Amplifier or EQ, Install w/ RCA Jacks & Unique Noise Detection Circuit - Pyramid NS20

  • DESIGNED TO ELIMINATE NOISE: The NS20 Noise Suppressor eliminates unwanted noise and hum without altering car audio natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.
  • USED WITH AMPLIFIER OR EQ: Eliminate ground loop humming and buzzing noise between an audio source and an amplifier. When used with car audio, this isolation circuit goes between the head unit and the amp or EQ.
  • UNIQUE NOISE DETECTION CIRCUIT: Power supply noise of igniter produces filtration effect, make the sound effect is better This NS20 Unique noise detection circuit preserves the natural attack and envelope of an instrument's sound.
  • RCA PLUGS: When connecting it to your amplifier just plug in the RCA Jacks that fit your amplifier and plug the other end into your Stereo. Tried plugging the RCA cables that were connecting to the amp into it, as well as the radio RCA.
  • 200W & 15A HIGH QUALITY: Keep Safe! The body item is covered by copper material, having high temperature and melting resistant function. Prevent the item from short circuits. Keep safe in your car.
Check Stock

Better Sound from your Phonograph: How come? How-to!

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check Stock

Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier (PP444) & Hosa CRA-202DJ Dual RCA to Dual Right Angle RCA with Ground Wire Stereo Interconnect Cable, 2 Meters

  • Product 1: CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • Product 1: LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • Product 1: CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more.
  • Product 1: SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs.
  • Product 2: Connectors: Dual RCA to Same with Ground Wire.
  • Product 2: Stereo RCA to Right-Angle Stereo RCA Cable with Ground Wire.
  • Product 2: Oxygen-Free Copper (OFC) conductors for enhanced signal clarity.
  • Product 2: OFC spiral shields for effective EMI and RFI rejection and flexibility.
Check Stock

ZVFOTN Ground Loop Noise Isolator, Audio Noise Filter for Car Audio/Home Stereo System with 3.5mm Audio Cable, Eliminate Buzzing Sound, Black

  • Eliminating Noise: The Ground Loop Isolator can be used to achieve a clear speech/music by eliminating the humming/hissing/buzzing noise in car speakers / home stereo systems when using the Bluetooth receiver..
  • Simple: Plugged this ground loop isolator directly into the cars/speakers AUX port, then the aux cable into the audio source. You will see the change was instant! Completely solved the noise problem! This noise filter does not require charging and has no built-in battery..
  • Wide Compatible: Works with any portable device that has 3.5mm / RCA audio jacks, for your Car Audio System/Home Stereo, when grounding issues persist. Also used with a Bluetooth Receiver/Bluetooth Hands-free Car Kit in your Car Audio System/Home Stereo..
  • Pure Sound Quality: No damage with Rock Music,Give you better experience,Can be used on Mono..
  • Package Contents: ZVFOTN Ground Loop Isolator, 3.5mm Audio Cable, User Manual..
Check Stock

USB Type c to Dual RCA Cable Type-C to 2 Male RCA Cable USB c to RCA Audio adpater Converter for Amplifier Speaker-9.8FT/3M

  • ...of 2RCA phono sockets in the left and right sound channels, then the sound is transmitted to the stereo,the TV,DVD player and more devices with RCA ports..
  • High-performance DAC Chip: usb c male to male rca cable built-in with a formidable DAC Chip that achieve 24bit/96kHz audio output capacity, improve the signal-to-noise ratio, decrease frequency range rata and maintain original sound quality.The USB C to 2RCA DAC Cable lets you enjoy no-loss, noise-free, high-fidelity audio on home Hi-Fi system, car stereo radio, soundbar, turntable, speaker, mixer, amplifier etc..
  • Plug and Play: RCA to USB C Cable streams stereo audio for high quality sound.RCA connectors have easy grips for plugging and unplugging while ensuring reliability..
  • Widely Compatibility: USB-C to 2 RCA Cable is made for most of USB C devices, such as 12-inch Macbook, HUAWEI Matebook, Google Pixel 2/2XL/3/3XL, iPad Pro 2018, Samsung, HUAWEI, Red MI , LG V30 V20 G5 G6 and other usb c devices..
  • 1. The audio signal can only be output from Type-C to RCA. Do not use from RCA to Type-C in reverse.
  • 2. Type-C Male to 2 RCA Male Audio Cable is NOT available for Iphone series smartphone..
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Phono Turntable Preamp, Moukey Stereo Mini Preamplifier,RCA Input, RCA Output for Vinyl Record Player, Low Noise,Independent Knob Control Operation, with DC 5V Adapter-MPAMP1

  • 【Easy to Use】 This preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground , and then connect the amplifier receiver to the RCA outputs. Note: Please use RCA cables with better shielding properties (not included), otherwise there will be buzzing, noise, etc..
  • 【 Low Noise Operation】Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. Hooking up the preamp to the turntable and audio device(for example, power amplifier), and then connect the power amplifier to the speaker, you can enjoy better sound and less distortion..
  • 【Converts Phono Signals】Turntable preamplifier, which can convert sound signal into line level signal, this advanced circuit sound preamplifier, input sensitivity electromagnetic pickup..
  • 【DC 5V Power Supply】This product uses the latest DC 5V power supply mode, so no longer restricts the application scenarios. Note: Please use an external power supply with CE or UL certification, and stay away from the interference source, otherwise it will cause noise and other undesirable interference to the product..
  • 【Double Gain】Considering that the signal of the phonograph is relatively weak, our company has added a set of gain adjustments for the input an....
Check Stock

Rockville RW8CA 8' 600 Watt Low Profile Under-Seat Active Powered Car Subwoofer

  • Rockville RW8CA 600 Watt 8" Active Sealed Slim Car Subwoofer..
  • 600 Watts Peak Power / 150 Watts RMS. PWM MOSFET Power Supply..
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology..
  • Adjustable Input Sensitivity. Soft Delayed Remote Turn-On..
  • Thermal Protection Circuit, Short Protection Circuit..
  • Overload Protection Circuit. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 150Hz..
  • Bass Boost: 0 - 18dB @ 45Hz. Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz..
  • Power Output: 150 Watts RMS Monoblock at 2 Ohms and 1% THD+N. Signal to Noise Ratio: 95 dB. Frequency Response: 20Hz - 150Hz. Sensitivity: 100dB @ 1w / 1m..
  • Dynamic Power: 600 Watts @ 2 Ohms. Dimensions: 12.4 x 11 x 2.7 (L x W X H) Inches..
  • Note: Kindly refer User Manual before use.
Check Stock

Nobsound Little Bear T7 Vacumn Tube Mini Phono Stage RIAA MM Turntable Preamp & HiFi Tube Pre-Amplifier (Silver)

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check Stock

GELRHONR XLR to 2 RCA Y Splitter Audio Cable,Unbalanced 3 Pin XLR Female to Dual RCA Male Stereo Breakout Cable Adapter Patch Cord Gold-Plated Plug for Microphone Mixing Console Amplifier - 0.3M/1Ft

  • ...balanced RCA to XLR adapter. wiring pin 2 of the XLR to the RCA plug, and Pin 1 and Pin 3 of the XLR connects to the sleeve of both RCA plugs.This is an adapter to let you use an XLR mic/ component on your RCA circuit..
  • ✪ 20 AWG Oxygen Free Copper with Foil shielding eliminate interference, deliver pristine sound, noise shielding, crystal clear music. High quality noise free performance.24k Gold-Plated Connectors for resist corrosion and offer a clear, smooth-flowing optimal signal, ensures minimum signal loss transfer..
  • ✪ This adapter is commonly plugged into a stereo RCA input/output to create an XLR female connection,Conecting DJ Controllers to Amplifiers.The XLR signal is simply split across the RCA connectors. Suitable for splitting or combining audio signals, is ideal for solving a number of audio problems..
Check Stock

25 feet 2 RCA Male to Female Audio Extension Cable (Red/White Connectors)

  • ...-compatible cords. Our cords feature fantastic conductivity because we use the highest quality copper conductors available, which translates into crystal-clear sound and video every time these cables are used..
  • DURABLE DESIGN: Both braided and spiral shielding is used to help reduce outside interference, signals and noise that will interfere with the quality of your video and sound. RCA audio and visual cables are made with ultra-strong PVC jackets and coatings to help with their flexibility as well as their ability to withstand abuse that comes with every day use. They are made using 26 AWG high-signal wire conductors with nickel-plated shell connectors..
  • HIGH COMPATIBILITY: Our standard RCA cables are an economical way to connect audio and video devices, such as stereo equipment, DVD players, and TVs. RCA extension cables have two RCA male and two RCA male A/V jacks that are color-coded for the left and right audio channels..
  • DIFFERENT LENGTHS AVAILABLE FOR PERFECT FIT: From short cable lengths to extra-long, we have the sizes you are searching for to best suit the individual RCA cable needs you have. Our RCA cables come in lengths from 6 feet up to 25 feet - when you need that extra length for extended projects..
  • CLEAR AUDIO: Eliminates unwanted noise....
Check Stock