Top Rear Axle Bearing Puller

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while resisting rust and corrosion.
  • Inner CV axle removal tool has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

VCT 23" Long 5lb Slide Hammer Inner CV Joint Puller

  • The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
  • The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
  • Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
  • The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check Stock

OTC 6540 Rear Axle Bearing Puller Set - 8 Piece

  • Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks.
  • Includes 3 sizes of rear axle bearing pullers.
  • Slide hammer tee bar and Slide hammer 5 LB head weight.
  • Pulling hook rear axle pulling plate and bearing cup remover.
Check Stock

WINMAX TOOLS AUTOMOTIVE 18 Pc Heavy Duty Axles Slide Hammer Dent Panel Bearings Gears Seals Puller Set

  • SHIPPING-IT will be shipped within 24hs, delivery in 7-12 days. Contact us if any problems..
  • This professional quality Slide Hammer Puller kit is ideal for use within the automotive industry for pulling bearings, gears and front wheel drive axle shafts..
  • This heavy duty slide hammer has a 5 lb. hammer to pack real punch. The slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. The pack contain versatile puller assortment to let you handle all kinds of pounding and pulling operations..
  • Accessories Included ·Slide hammer, ·2 and 3 jaw puller yokes, ·Internal/external puller arms, ·Wheel/axle puller yoke, ·Dent puller hook, ·Dent puller screws (large and small), ·Adapters and hardware, case.
  • Features/Specifications ·Material: steel, heat treatment ·5 lb. chrome plated steel slide hammer ·T-handle for secure grip ·Chrome-plated shaft for smooth operation ·Combination puller with 5-lb malleable steel slide hammer. ·Drop forged steel pullers and attachments fully hardened shaft and accessories. ·Converts into a 2 or 3 jaws internal/external puller for reaching right areas. ·Packed in a sturdy carry case.
Check Stock

East Lake Axle replacement for rear Axle and Bearing Carrier Yamaha Raptor 660 2001 2002 2003 2004 2005

  • Please verify your year, make and model in the product details before purchasing..
  • OEM Replacement. Brand New Complete Rear Wheel Axle and Bearing Carrier.
  • Stock Length rear wheel axle & bearing carrier.
  • This axle is an OEM replacement for the following OEM # 5LP-25381-10-00 / This bearing carrier is an OEM replacement for the following OEM # 5LP-25311-10-00.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

Supreme Suspensions - Full Lift Kit for 1987-2004 Dodge Dakota Adjustable 1 to 3 Front Lift Torsion Keys + 2 Rear Lift Blocks + Square Bend U-Bolts + Axle Alignment Shims 4WD

  • COMPATIBLE WITH 1987 - 2004 Dodge Dakota. *Only fits AWD models with 8.25" rear axle..
  • CONTENTS: (2x) Front Lift Torsion Keys, (2x) Rear Tapered Lift Blocks, (4x) Square Bend U-Bolts, (2x) Axle Alignment Shims, Installation Hardware,....
  • TECHNICAL NOTES: Adjustable 1 to 3 inch front and 2 inch rear suspension lift..
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours. A torsion bar puller, or 5 ton gear puller is required for install. An alignment is always....
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion....
Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • ...versal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】：With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • 【100% SATISFACTION GUARANTEE 】If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints

  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Upgraded Rear Axle Bearing Carrier Fit for 1987-2007 Honda TRX300EX 300EX Dual Row Rear Axle Carrier Bearing 2pcs

  • ☛Strong Compatibility — For 1987-2007 Honda TRX300EX 300EX, Fits 1987-2007 Honda TRX300EX 300EX DUAL ROW Rear Axle Carrier Bearing..
  • ☛Superior Material — Our Rear Axle Bearing Carrier body is CAD engineered and CNC machined from billet 6061-T6 aluminum and steel, light weight,....
  • ☛Upgrade Design — Our Rear Axle Bearing Carrier are special designed with a high-temperature, tension spring radial lip grease seals to ensure....
  • ☛High Performance — Come complete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are....
  • ☛Satisfaction Guarantee — If you're not 100% satisfied with our products, simply return it in 30 days for a full refund, with unconditional refund....
Check Stock